xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/imx/imx6q-tbs2910.dts (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Copyright 2014 Soeren Moch <smoch@web.de>
4
5/dts-v1/;
6
7#include "imx6q.dtsi"
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/input.h>
10
11/ {
12	model = "TBS2910 Matrix ARM mini PC";
13	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
14
15	chosen {
16		stdout-path = &uart1;
17	};
18
19	aliases {
20		mmc0 = &usdhc2;
21		mmc1 = &usdhc3;
22		mmc2 = &usdhc4;
23		/delete-property/ mmc3;
24	};
25
26	memory@10000000 {
27		device_type = "memory";
28		reg = <0x10000000 0x80000000>;
29	};
30
31	fan {
32		compatible = "gpio-fan";
33		pinctrl-names = "default";
34		pinctrl-0 = <&pinctrl_gpio_fan>;
35		gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
36		gpio-fan,speed-map = <0    0
37				      3000 1>;
38	};
39
40	ir_recv {
41		compatible = "gpio-ir-receiver";
42		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
43		pinctrl-names = "default";
44		pinctrl-0 = <&pinctrl_ir>;
45	};
46
47	leds {
48		compatible = "gpio-leds";
49		pinctrl-names = "default";
50		pinctrl-0 = <&pinctrl_gpio_leds>;
51
52		led-blue {
53			label = "blue_status_led";
54			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
55			default-state = "keep";
56		};
57	};
58
59	reg_2p5v: regulator-2p5v {
60		compatible = "regulator-fixed";
61		regulator-name = "2P5V";
62		regulator-min-microvolt = <2500000>;
63		regulator-max-microvolt = <2500000>;
64	};
65
66	reg_3p3v: regulator-3p3v {
67		compatible = "regulator-fixed";
68		regulator-name = "3P3V";
69		regulator-min-microvolt = <3300000>;
70		regulator-max-microvolt = <3300000>;
71	};
72
73	reg_5p0v: regulator-5p0v {
74		compatible = "regulator-fixed";
75		regulator-name = "5P0V";
76		regulator-min-microvolt = <5000000>;
77		regulator-max-microvolt = <5000000>;
78	};
79
80	sound-sgtl5000 {
81		audio-codec = <&sgtl5000>;
82		audio-routing =
83			"MIC_IN", "Mic Jack",
84			"Mic Jack", "Mic Bias",
85			"Headphone Jack", "HP_OUT";
86		compatible = "fsl,imx-audio-sgtl5000";
87		model = "On-board Codec";
88		mux-ext-port = <3>;
89		mux-int-port = <1>;
90		ssi-controller = <&ssi1>;
91	};
92
93	sound-spdif {
94		compatible = "fsl,imx-audio-spdif";
95		model = "On-board SPDIF";
96		spdif-controller = <&spdif>;
97		spdif-out;
98	};
99};
100
101&audmux {
102	status = "okay";
103};
104
105&fec {
106	pinctrl-names = "default";
107	pinctrl-0 = <&pinctrl_enet>;
108	phy-mode = "rgmii-id";
109	phy-handle = <&phy>;
110	status = "okay";
111
112	mdio {
113		#address-cells = <1>;
114		#size-cells = <0>;
115
116		phy: ethernet-phy@4 {
117			reg = <4>;
118			qca,clk-out-frequency = <125000000>;
119			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
120			reset-assert-us = <10000>;
121		};
122	};
123};
124
125&hdmi {
126	pinctrl-names = "default";
127	pinctrl-0 = <&pinctrl_hdmi>;
128	ddc-i2c-bus = <&i2c2>;
129	status = "okay";
130};
131
132&i2c1 {
133	clock-frequency = <100000>;
134	pinctrl-names = "default";
135	pinctrl-0 = <&pinctrl_i2c1>;
136	status = "okay";
137
138	sgtl5000: sgtl5000@a {
139		clocks = <&clks IMX6QDL_CLK_CKO>;
140		compatible = "fsl,sgtl5000";
141		pinctrl-names = "default";
142		pinctrl-0 = <&pinctrl_sgtl5000>;
143		reg = <0x0a>;
144		VDDA-supply = <&reg_2p5v>;
145		VDDIO-supply = <&reg_3p3v>;
146	};
147};
148
149&i2c2 {
150	clock-frequency = <100000>;
151	pinctrl-names = "default";
152	pinctrl-0 = <&pinctrl_i2c2>;
153	status = "okay";
154};
155
156&i2c3 {
157	clock-frequency = <100000>;
158	pinctrl-names = "default";
159	pinctrl-0 = <&pinctrl_i2c3>;
160	status = "okay";
161
162	rtc: rtc@68 {
163		compatible = "dallas,ds1307";
164		reg = <0x68>;
165	};
166};
167
168&pcie {
169	pinctrl-names = "default";
170	pinctrl-0 = <&pinctrl_pcie>;
171	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
172	status = "okay";
173};
174
175&sata {
176	fsl,transmit-level-mV = <1104>;
177	fsl,transmit-boost-mdB = <3330>;
178	fsl,transmit-atten-16ths = <16>;
179	fsl,receive-eq-mdB = <3000>;
180	status = "okay";
181};
182
183&snvs_poweroff {
184	status = "okay";
185};
186
187&spdif {
188	pinctrl-names = "default";
189	pinctrl-0 = <&pinctrl_spdif>;
190	status = "okay";
191};
192
193&ssi1 {
194	status = "okay";
195};
196
197&uart1 {
198	pinctrl-names = "default";
199	pinctrl-0 = <&pinctrl_uart1>;
200	status = "okay";
201};
202
203&uart2 {
204	pinctrl-names = "default";
205	pinctrl-0 = <&pinctrl_uart2>;
206	status = "okay";
207};
208
209&usbh1 {
210	vbus-supply = <&reg_5p0v>;
211	status = "okay";
212};
213
214&usbotg {
215	vbus-supply = <&reg_5p0v>;
216	pinctrl-names = "default";
217	pinctrl-0 = <&pinctrl_usbotg>;
218	disable-over-current;
219	status = "okay";
220};
221
222&usdhc2 {
223	pinctrl-names = "default";
224	pinctrl-0 = <&pinctrl_usdhc2>;
225	bus-width = <4>;
226	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
227	vmmc-supply = <&reg_3p3v>;
228	vqmmc-supply = <&reg_3p3v>;
229	voltage-ranges = <3300 3300>;
230	no-1-8-v;
231	status = "okay";
232};
233
234&usdhc3 {
235	pinctrl-names = "default";
236	pinctrl-0 = <&pinctrl_usdhc3>;
237	bus-width = <4>;
238	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
239	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
240	vmmc-supply = <&reg_3p3v>;
241	vqmmc-supply = <&reg_3p3v>;
242	voltage-ranges = <3300 3300>;
243	no-1-8-v;
244	status = "okay";
245};
246
247&usdhc4 {
248	pinctrl-names = "default";
249	pinctrl-0 = <&pinctrl_usdhc4>;
250	bus-width = <8>;
251	vmmc-supply = <&reg_3p3v>;
252	vqmmc-supply = <&reg_3p3v>;
253	voltage-ranges = <3300 3300>;
254	non-removable;
255	no-1-8-v;
256	status = "okay";
257};
258
259&iomuxc {
260	pinctrl_enet: enetgrp {
261		fsl,pins = <
262			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
263			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
264			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
265			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
266			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
267			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
268			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
269			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
270			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
271			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
272			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
273			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
274			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
275			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
276			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
277			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
278			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
279		>;
280	};
281
282	pinctrl_gpio_fan: gpiofangrp {
283		fsl,pins = <
284			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
285		>;
286	};
287
288	pinctrl_gpio_leds: gpioledsgrp {
289		fsl,pins = <
290			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
291		>;
292	};
293
294	pinctrl_hdmi: hdmigrp {
295		fsl,pins = <
296			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
297		>;
298	};
299
300	pinctrl_i2c1: i2c1grp {
301		fsl,pins = <
302			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
303			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
304		>;
305	};
306
307	pinctrl_i2c2: i2c2grp {
308		fsl,pins = <
309			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
310			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
311		>;
312	};
313
314	pinctrl_i2c3: i2c3grp {
315		fsl,pins = <
316			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
317			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
318		>;
319	};
320
321	pinctrl_ir: irgrp {
322		fsl,pins = <
323			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
324		>;
325	};
326
327	pinctrl_pcie: pciegrp {
328		fsl,pins = <
329			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
330		>;
331	};
332
333	pinctrl_sgtl5000: sgtl5000grp {
334		fsl,pins = <
335			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
336			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
337			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
338			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
339			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
340		>;
341	};
342
343	pinctrl_spdif: spdifgrp {
344		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
345		>;
346	};
347
348	pinctrl_uart1: uart1grp {
349		fsl,pins = <
350			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
351			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
352		>;
353	};
354
355	pinctrl_uart2: uart2grp {
356		fsl,pins = <
357			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
358			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
359		>;
360	};
361
362	pinctrl_usbotg: usbotggrp {
363		fsl,pins = <
364			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
365		>;
366	};
367
368	pinctrl_usdhc2: usdhc2grp {
369		fsl,pins = <
370			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
371			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
372			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
373			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
374			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
375			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
376			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
377		>;
378	};
379
380	pinctrl_usdhc3: usdhc3grp {
381		fsl,pins = <
382			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
383			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
384			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
385			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
386			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
387			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
388			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
389			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
390		>;
391	};
392
393	pinctrl_usdhc4: usdhc4grp {
394		fsl,pins = <
395			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
396			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
397			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
398			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
399			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
400			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
401			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
402			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
403			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
404			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
405		>;
406	};
407};
408