xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/imx/imx6q-prti6q.dts (revision 96190b4fef3b4a0cc3ca0606b0c4e3e69a5e6717)
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (c) 2014 Protonic Holland
4 */
5
6/dts-v1/;
7#include "imx6q.dtsi"
8#include "imx6qdl-prti6q.dtsi"
9#include <dt-bindings/leds/common.h>
10#include <dt-bindings/sound/fsl-imx-audmux.h>
11
12/ {
13	model = "Protonic PRTI6Q board";
14	compatible = "prt,prti6q", "fsl,imx6q";
15
16	memory@10000000 {
17		device_type = "memory";
18		reg = <0x10000000 0xf0000000>;
19	};
20
21	backlight_lcd: backlight-lcd {
22		compatible = "pwm-backlight";
23		pinctrl-names = "default";
24		pinctrl-0 = <&pinctrl_backlight>;
25		pwms = <&pwm1 0 5000000>;
26		brightness-levels = <0 16 64 255>;
27		num-interpolated-steps = <16>;
28		default-brightness-level = <1>;
29		power-supply = <&reg_3v3>;
30		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
31	};
32
33	can_osc: can-osc {
34		compatible = "fixed-clock";
35		#clock-cells = <0>;
36		clock-frequency = <25000000>;
37	};
38
39	leds {
40		compatible = "gpio-leds";
41		pinctrl-names = "default";
42		pinctrl-0 = <&pinctrl_leds>;
43
44		led-debug0 {
45			function = LED_FUNCTION_STATUS;
46			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
47			linux,default-trigger = "heartbeat";
48		};
49
50		led-debug1 {
51			function = LED_FUNCTION_SD;
52			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
53			linux,default-trigger = "disk-activity";
54		};
55	};
56
57	panel {
58		compatible = "kyo,tcg121xglp";
59		backlight = <&backlight_lcd>;
60
61		port {
62			panel_in: endpoint {
63				remote-endpoint = <&lvds0_out>;
64			};
65		};
66	};
67
68	reg_1v8: regulator-1v8 {
69		compatible = "regulator-fixed";
70		regulator-name = "1v8";
71		regulator-min-microvolt = <1800000>;
72		regulator-max-microvolt = <1800000>;
73	};
74
75	reg_wifi: regulator-wifi {
76		compatible = "regulator-fixed";
77		pinctrl-names = "default";
78		pinctrl-0 = <&pinctrl_wifi_npd>;
79		enable-active-high;
80		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
81		regulator-max-microvolt = <1800000>;
82		regulator-min-microvolt = <1800000>;
83		regulator-name = "regulator-WL12xx";
84		startup-delay-us = <70000>;
85	};
86
87	sound {
88		compatible = "simple-audio-card";
89		simple-audio-card,name = "prti6q-sgtl5000";
90		simple-audio-card,format = "i2s";
91		simple-audio-card,widgets =
92			"Microphone", "Microphone Jack",
93			"Line", "Line In Jack",
94			"Headphone", "Headphone Jack",
95			"Speaker", "External Speaker";
96		simple-audio-card,routing =
97			"MIC_IN", "Microphone Jack",
98			"LINE_IN", "Line In Jack",
99			"Headphone Jack", "HP_OUT",
100			"External Speaker", "LINE_OUT";
101
102		simple-audio-card,cpu {
103			sound-dai = <&ssi1>;
104			system-clock-frequency = <0>;
105		};
106
107		simple-audio-card,codec {
108			sound-dai = <&sgtl5000>;
109			bitclock-master;
110			frame-master;
111		};
112	};
113
114	sound-spdif {
115		compatible = "fsl,imx-audio-spdif";
116		model = "imx-spdif";
117		spdif-controller = <&spdif>;
118		spdif-in;
119		spdif-out;
120	};
121};
122
123&audmux {
124	pinctrl-names = "default";
125	pinctrl-0 = <&pinctrl_audmux>;
126	status = "okay";
127
128	mux-ssi1 {
129		fsl,audmux-port = <0>;
130		fsl,port-config = <
131			IMX_AUDMUX_V2_PTCR_SYN		0
132			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
133			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
134			IMX_AUDMUX_V2_PTCR_TFSDIR	0
135			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
136		>;
137	};
138
139	mux-pins3 {
140		fsl,audmux-port = <2>;
141		fsl,port-config = <
142			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
143			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
144		>;
145	};
146};
147
148&can1 {
149	pinctrl-names = "default";
150	pinctrl-0 = <&pinctrl_can1>;
151	status = "okay";
152};
153
154&can2 {
155	pinctrl-names = "default";
156	pinctrl-0 = <&pinctrl_can2>;
157	status = "okay";
158};
159
160&ecspi1 {
161	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
162	pinctrl-names = "default";
163	pinctrl-0 = <&pinctrl_ecspi1>;
164	status = "okay";
165
166	flash@0 {
167		compatible = "jedec,spi-nor";
168		reg = <0>;
169		spi-max-frequency = <20000000>;
170	};
171};
172
173&ecspi2 {
174	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
175	pinctrl-names = "default";
176	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
177	status = "okay";
178
179	can@0 {
180		compatible = "microchip,mcp2515";
181		reg = <0>;
182		pinctrl-names = "default";
183		pinctrl-0 = <&pinctrl_can3>;
184		clocks = <&can_osc>;
185		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
186		spi-max-frequency = <5000000>;
187	};
188
189	adc@1 {
190		compatible = "ti,adc128s052";
191		reg = <1>;
192		spi-max-frequency = <2000000>;
193		vref-supply = <&reg_3v3>;
194	};
195};
196
197&ecspi3 {
198	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
199	pinctrl-names = "default";
200	pinctrl-0 = <&pinctrl_ecspi3>;
201	status = "okay";
202};
203
204&fec {
205	pinctrl-names = "default";
206	pinctrl-0 = <&pinctrl_enet>;
207	phy-mode = "rgmii-id";
208	phy-handle = <&rgmii_phy>;
209	status = "okay";
210
211	mdio {
212		#address-cells = <1>;
213		#size-cells = <0>;
214
215		/* Microchip KSZ9031RNX PHY */
216		rgmii_phy: ethernet-phy@0 {
217			reg = <0>;
218			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
219			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
220			reset-assert-us = <10000>;
221			reset-deassert-us = <300>;
222		};
223	};
224};
225
226&hdmi {
227	pinctrl-names = "default";
228	pinctrl-0 = <&pinctrl_hdmi>;
229	ddc-i2c-bus = <&i2c2>;
230	status = "okay";
231};
232
233&i2c1 {
234	sgtl5000: audio-codec@a {
235		compatible = "fsl,sgtl5000";
236		reg = <0xa>;
237		#sound-dai-cells = <0>;
238		clocks = <&clks 201>;
239		VDDA-supply = <&reg_3v3>;
240		VDDIO-supply = <&reg_3v3>;
241		VDDD-supply = <&reg_1v8>;
242	};
243};
244
245/* DDC */
246&i2c2 {
247	clock-frequency = <100000>;
248	pinctrl-names = "default";
249	pinctrl-0 = <&pinctrl_i2c2>;
250	status = "okay";
251};
252
253&i2c3 {
254	adc@49 {
255		compatible = "ti,ads1015";
256		reg = <0x49>;
257		#address-cells = <1>;
258		#size-cells = <0>;
259
260		/* can2_l */
261		channel@4 {
262			reg = <4>;
263			ti,gain = <3>;
264			ti,datarate = <3>;
265		};
266
267		/* can2_h */
268		channel@5 {
269			reg = <5>;
270			ti,gain = <3>;
271			ti,datarate = <3>;
272		};
273
274		/* can1_l */
275		channel@6 {
276			reg = <6>;
277			ti,gain = <3>;
278			ti,datarate = <3>;
279		};
280
281		/* can1_h */
282		channel@7 {
283			reg = <7>;
284			ti,gain = <3>;
285			ti,datarate = <3>;
286		};
287	};
288};
289
290&pcie {
291	status = "okay";
292};
293
294&pwm1 {
295	#pwm-cells = <2>;
296	pinctrl-names = "default";
297	pinctrl-0 = <&pinctrl_pwm1>;
298	status = "okay";
299};
300
301&ldb {
302	status = "okay";
303
304	lvds-channel@0 {
305		status = "okay";
306
307		port@4 {
308			reg = <4>;
309
310			lvds0_out: endpoint {
311				remote-endpoint = <&panel_in>;
312			};
313		};
314	};
315};
316
317&sata {
318	status = "okay";
319};
320
321&snvs_poweroff {
322	status = "okay";
323};
324
325&spdif {
326	pinctrl-names = "default";
327	pinctrl-0 = <&pinctrl_spdif>;
328	status = "okay";
329};
330
331&ssi1 {
332	#sound-dai-cells = <0>;
333	fsl,mode = "ac97-slave";
334	status = "okay";
335};
336
337&uart2 {
338	pinctrl-names = "default";
339	pinctrl-0 = <&pinctrl_uart2>;
340	status = "okay";
341};
342
343&uart5 {
344	pinctrl-names = "default";
345	pinctrl-0 = <&pinctrl_uart5>;
346	status = "okay";
347};
348
349&usbotg {
350	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
351};
352
353&usdhc2 {
354	pinctrl-names = "default";
355	pinctrl-0 = <&pinctrl_usdhc2>;
356	non-removable;
357	vmmc-supply = <&reg_wifi>;
358	cap-power-off-card;
359	keep-power-in-suspend;
360	status = "okay";
361
362	#address-cells = <1>;
363	#size-cells = <0>;
364	wifi@2 {
365		compatible = "ti,wl1271";
366		reg = <2>;
367		pinctrl-names = "default";
368		pinctrl-0 = <&pinctrl_wifi>;
369		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
370		ref-clock-frequency = <38400000>;
371		tcxo-clock-frequency = <19200000>;
372	};
373};
374
375&iomuxc {
376	pinctrl_audmux: audmuxgrp {
377		fsl,pins = <
378			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
379			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
380			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
381			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
382			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
383		>;
384	};
385
386	pinctrl_backlight: backlightgrp {
387		fsl,pins = <
388			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
389		>;
390	};
391
392	pinctrl_can2: can2grp {
393		fsl,pins = <
394			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b008
395			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b008
396		>;
397	};
398
399	pinctrl_can3: can3grp {
400		fsl,pins = <
401			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
402		>;
403	};
404
405	pinctrl_ecspi1: ecspi1grp {
406		fsl,pins = <
407			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
408			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
409			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
410			/* CS */
411			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
412		>;
413	};
414
415	pinctrl_ecspi2: ecspi2grp {
416		fsl,pins = <
417			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
418			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
419			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
420			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
421		>;
422	};
423
424	pinctrl_ecspi2_cs: ecspi2csgrp {
425		fsl,pins = <
426			/* ADC128S022 CS */
427			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
428		>;
429	};
430
431	pinctrl_ecspi3: ecspi3grp {
432		fsl,pins = <
433			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
434			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
435			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
436			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
437		>;
438	};
439
440	pinctrl_enet: enetgrp {
441		fsl,pins = <
442			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
443			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
444			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
445			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
446			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
447			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
448			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
449			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
450			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
451			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
452			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
453			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
454			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
455			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
456			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
457
458			/* Phy reset */
459			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
460			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
461		>;
462	};
463
464	pinctrl_hdmi: hdmigrp {
465		fsl,pins = <
466			/* NOTE: DDC is done via I2C2, so DON'T
467			 * configure DDC pins for HDMI!
468			 */
469			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
470		>;
471	};
472
473	/* DDC */
474	pinctrl_i2c2: i2c2grp {
475		fsl,pins = <
476			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
477			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
478		>;
479	};
480
481	pinctrl_leds: ledsgrp {
482		fsl,pins = <
483			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
484			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
485		>;
486	};
487
488	pinctrl_pwm1: pwm1grp {
489		fsl,pins = <
490			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
491		>;
492	};
493
494	pinctrl_spdif: spdifgrp {
495		fsl,pins = <
496			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
497			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
498		>;
499	};
500
501	pinctrl_uart2: uart2grp {
502		fsl,pins = <
503			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
504			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
505			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
506			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
507		>;
508	};
509
510	pinctrl_uart5: uart5grp {
511		fsl,pins = <
512			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
513			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
514		>;
515	};
516
517	pinctrl_usbotg_id: usbotgidgrp {
518		fsl,pins = <
519			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
520		>;
521	};
522
523	pinctrl_usdhc2: usdhc2grp {
524		fsl,pins = <
525			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
526			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
527			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
528			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
529			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
530			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
531		>;
532	};
533
534	pinctrl_wifi: wifigrp {
535		fsl,pins = <
536			/* WL12xx IRQ */
537			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
538		>;
539	};
540
541	pinctrl_wifi_npd: wifinpd {
542		fsl,pins = <
543			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
544		>;
545	};
546};
547