1// SPDX-License-Identifier: GPL-2.0 2// 3// Copyright (C) 2015-2018 Y Soft Corporation, a.s. 4 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/interrupt-controller/irq.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/pwm/pwm.h> 10 11/ { 12 aliases: aliases { 13 ethernet1 = ð1; 14 ethernet2 = ð2; 15 mmc0 = &usdhc3; 16 mmc1 = &usdhc4; 17 }; 18 19 backlight: backlight { 20 compatible = "pwm-backlight"; 21 pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; 22 brightness-levels = <0 32 64 128 255>; 23 default-brightness-level = <32>; 24 num-interpolated-steps = <8>; 25 power-supply = <&sw2_reg>; 26 status = "disabled"; 27 }; 28 29 lcd_display: display { 30 compatible = "fsl,imx-parallel-display"; 31 #address-cells = <1>; 32 #size-cells = <0>; 33 interface-pix-fmt = "rgb24"; 34 pinctrl-names = "default"; 35 pinctrl-0 = <&pinctrl_ipu1>; 36 status = "disabled"; 37 38 port@0 { 39 reg = <0>; 40 41 lcd_display_in: endpoint { 42 remote-endpoint = <&ipu1_di0_disp0>; 43 }; 44 }; 45 46 port@1 { 47 reg = <1>; 48 49 lcd_display_out: endpoint { 50 remote-endpoint = <&lcd_panel_in>; 51 }; 52 }; 53 }; 54 55 panel: panel { 56 compatible = "dataimage,scf0700c48ggu18"; 57 power-supply = <&sw2_reg>; 58 backlight = <&backlight>; 59 status = "disabled"; 60 61 port { 62 lcd_panel_in: endpoint { 63 remote-endpoint = <&lcd_display_out>; 64 }; 65 }; 66 }; 67 68 reg_pcie: regulator-pcie { 69 compatible = "regulator-fixed"; 70 pinctrl-names = "default"; 71 pinctrl-0 = <&pinctrl_pcie_reg>; 72 regulator-name = "MPCIE_3V3"; 73 regulator-min-microvolt = <3300000>; 74 regulator-max-microvolt = <3300000>; 75 gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; 76 enable-active-high; 77 status = "disabled"; 78 }; 79 80 reg_usb_h1_vbus: regulator-usb-h1-vbus { 81 compatible = "regulator-fixed"; 82 pinctrl-names = "default"; 83 pinctrl-0 = <&pinctrl_usbh1_vbus>; 84 regulator-name = "usb_h1_vbus"; 85 regulator-min-microvolt = <5000000>; 86 regulator-max-microvolt = <5000000>; 87 gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; 88 enable-active-high; 89 status = "disabled"; 90 }; 91 92 reg_usb_otg_vbus: regulator-usb-otg-vbus { 93 compatible = "regulator-fixed"; 94 pinctrl-names = "default"; 95 pinctrl-0 = <&pinctrl_usbotg_vbus>; 96 regulator-name = "usb_otg_vbus"; 97 regulator-min-microvolt = <5000000>; 98 regulator-max-microvolt = <5000000>; 99 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 100 enable-active-high; 101 }; 102}; 103 104&fec { 105 pinctrl-names = "default"; 106 pinctrl-0 = <&pinctrl_enet>; 107 phy-mode = "rgmii-id"; 108 phy-supply = <&sw2_reg>; 109 status = "okay"; 110 111 fixed-link { 112 speed = <1000>; 113 full-duplex; 114 }; 115 116 mdio { 117 #address-cells = <1>; 118 #size-cells = <0>; 119 120 phy_port2: phy@1 { 121 reg = <1>; 122 }; 123 124 phy_port3: phy@2 { 125 reg = <2>; 126 }; 127 128 switch@10 { 129 compatible = "qca,qca8334"; 130 reg = <10>; 131 reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; 132 133 switch_ports: ports { 134 #address-cells = <1>; 135 #size-cells = <0>; 136 137 ethphy0: port@0 { 138 reg = <0>; 139 label = "cpu"; 140 phy-mode = "rgmii-id"; 141 ethernet = <&fec>; 142 143 fixed-link { 144 speed = <1000>; 145 full-duplex; 146 }; 147 }; 148 149 eth2: port@2 { 150 reg = <2>; 151 label = "eth2"; 152 phy-handle = <&phy_port2>; 153 }; 154 155 eth1: port@3 { 156 reg = <3>; 157 label = "eth1"; 158 phy-handle = <&phy_port3>; 159 }; 160 }; 161 }; 162 }; 163}; 164 165&hdmi { 166 pinctrl-names = "default"; 167 pinctrl-0 = <&pinctrl_hdmi_cec>; 168 ddc-i2c-bus = <&i2c2>; 169 status = "disabled"; 170}; 171 172&i2c2 { 173 clock-frequency = <100000>; 174 pinctrl-names = "default"; 175 pinctrl-0 = <&pinctrl_i2c2>; 176 status = "okay"; 177 178 pmic@8 { 179 compatible = "fsl,pfuze200"; 180 pinctrl-names = "default"; 181 pinctrl-0 = <&pinctrl_pmic>; 182 reg = <0x8>; 183 184 regulators { 185 sw1a_reg: sw1ab { 186 regulator-min-microvolt = <300000>; 187 regulator-max-microvolt = <1875000>; 188 regulator-boot-on; 189 regulator-always-on; 190 regulator-ramp-delay = <6250>; 191 }; 192 193 sw2_reg: sw2 { 194 regulator-min-microvolt = <800000>; 195 regulator-max-microvolt = <3300000>; 196 regulator-boot-on; 197 regulator-always-on; 198 }; 199 200 sw3a_reg: sw3a { 201 regulator-min-microvolt = <400000>; 202 regulator-max-microvolt = <1975000>; 203 regulator-boot-on; 204 regulator-always-on; 205 }; 206 207 sw3b_reg: sw3b { 208 regulator-min-microvolt = <400000>; 209 regulator-max-microvolt = <1975000>; 210 regulator-boot-on; 211 regulator-always-on; 212 }; 213 214 swbst_reg: swbst { 215 regulator-min-microvolt = <5000000>; 216 regulator-max-microvolt = <5150000>; 217 }; 218 219 vgen1_reg: vgen1 { 220 regulator-min-microvolt = <800000>; 221 regulator-max-microvolt = <1550000>; 222 }; 223 224 vgen2_reg: vgen2 { 225 regulator-min-microvolt = <800000>; 226 regulator-max-microvolt = <1550000>; 227 }; 228 229 vgen3_reg: vgen3 { 230 regulator-min-microvolt = <1800000>; 231 regulator-max-microvolt = <3300000>; 232 regulator-always-on; 233 }; 234 235 vgen4_reg: vgen4 { 236 regulator-min-microvolt = <1800000>; 237 regulator-max-microvolt = <3300000>; 238 regulator-always-on; 239 }; 240 241 vgen5_reg: vgen5 { 242 regulator-min-microvolt = <1800000>; 243 regulator-max-microvolt = <3300000>; 244 regulator-always-on; 245 }; 246 247 vgen6_reg: vgen6 { 248 regulator-min-microvolt = <1800000>; 249 regulator-max-microvolt = <3300000>; 250 regulator-always-on; 251 }; 252 253 vref_reg: vrefddr { 254 regulator-boot-on; 255 regulator-always-on; 256 }; 257 258 vsnvs_reg: vsnvs { 259 regulator-min-microvolt = <1000000>; 260 regulator-max-microvolt = <3000000>; 261 regulator-boot-on; 262 regulator-always-on; 263 }; 264 }; 265 }; 266 267 leds: led-controller@30 { 268 compatible = "ti,lp5562"; 269 reg = <0x30>; 270 clock-mode = /bits/ 8 <1>; 271 #address-cells = <1>; 272 #size-cells = <0>; 273 status = "disabled"; 274 275 led@0 { 276 chan-name = "R"; 277 led-cur = /bits/ 8 <0x20>; 278 max-cur = /bits/ 8 <0x60>; 279 reg = <0>; 280 color = <LED_COLOR_ID_RED>; 281 }; 282 283 led@1 { 284 chan-name = "G"; 285 led-cur = /bits/ 8 <0x20>; 286 max-cur = /bits/ 8 <0x60>; 287 reg = <1>; 288 color = <LED_COLOR_ID_GREEN>; 289 }; 290 291 led@2 { 292 chan-name = "B"; 293 led-cur = /bits/ 8 <0x20>; 294 max-cur = /bits/ 8 <0x60>; 295 reg = <2>; 296 color = <LED_COLOR_ID_BLUE>; 297 }; 298 }; 299 300 eeprom@57 { 301 compatible = "atmel,24c128"; 302 reg = <0x57>; 303 pagesize = <64>; 304 }; 305 306 touchscreen: touchscreen@5c { 307 compatible = "pixcir,pixcir_tangoc"; 308 reg = <0x5c>; 309 pinctrl-0 = <&pinctrl_touch>; 310 interrupt-parent = <&gpio4>; 311 interrupts = <5 IRQ_TYPE_EDGE_FALLING>; 312 attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; 313 reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; 314 touchscreen-size-x = <800>; 315 touchscreen-size-y = <480>; 316 status = "disabled"; 317 }; 318}; 319 320&i2c3 { 321 clock-frequency = <100000>; 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_i2c3>; 324 status = "okay"; 325 326 oled_1309: oled@3c { 327 compatible = "solomon,ssd1309fb-i2c"; 328 reg = <0x3c>; 329 solomon,height = <64>; 330 solomon,width = <128>; 331 solomon,page-offset = <0>; 332 solomon,segment-no-remap; 333 solomon,prechargep2 = <15>; 334 reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; 335 vbat-supply = <&sw2_reg>; 336 status = "disabled"; 337 }; 338 339 oled_1305: oled@3d { 340 compatible = "solomon,ssd1305fb-i2c"; 341 reg = <0x3d>; 342 solomon,height = <64>; 343 solomon,width = <128>; 344 solomon,page-offset = <0>; 345 solomon,col-offset = <4>; 346 solomon,prechargep2 = <15>; 347 reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; 348 vbat-supply = <&sw2_reg>; 349 status = "disabled"; 350 }; 351 352 gpio_oled: gpio@41 { 353 compatible = "nxp,pca9536"; 354 gpio-controller; 355 #gpio-cells = <2>; 356 reg = <0x41>; 357 vcc-supply = <&sw2_reg>; 358 status = "disabled"; 359 }; 360 361 touchkeys: keys@5a { 362 compatible = "fsl,mpr121-touchkey"; 363 reg = <0x5a>; 364 vdd-supply = <&sw2_reg>; 365 autorepeat; 366 linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, 367 <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, 368 <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; 369 poll-interval = <50>; 370 status = "disabled"; 371 }; 372}; 373 374&iomuxc { 375 pinctrl_enet: enetgrp { 376 fsl,pins = < 377 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 378 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 379 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 380 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 381 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 382 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 383 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 384 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 385 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 386 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 387 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 388 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 389 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 390 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 391 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 392 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 393 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 394 >; 395 }; 396 397 pinctrl_hdmi_cec: hdmicecgrp { 398 fsl,pins = < 399 MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898 400 >; 401 }; 402 403 pinctrl_i2c2: i2c2grp { 404 fsl,pins = < 405 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 406 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 407 >; 408 }; 409 410 pinctrl_i2c3: i2c3grp { 411 fsl,pins = < 412 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 413 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 414 >; 415 }; 416 417 pinctrl_ipu1: ipu1grp { 418 fsl,pins = < 419 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 420 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 421 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 422 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 423 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 424 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 425 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 426 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 427 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 428 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 429 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 430 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 431 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 432 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 433 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 434 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 435 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 436 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 437 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 438 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 439 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 440 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 441 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 442 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 443 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 444 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 445 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 446 >; 447 }; 448 449 pinctrl_pcie: pciegrp { 450 fsl,pins = < 451 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 452 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098 453 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098 454 >; 455 }; 456 457 pinctrl_pcie_reg: pciereggrp { 458 fsl,pins = < 459 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098 460 >; 461 }; 462 463 pinctrl_pmic: pmicgrp { 464 fsl,pins = < 465 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 466 >; 467 }; 468 469 pinctrl_pwm1: pwm1grp { 470 fsl,pins = < 471 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 472 >; 473 }; 474 475 pinctrl_touch: touchgrp { 476 fsl,pins = < 477 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 478 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 479 >; 480 }; 481 482 pinctrl_uart1: uart1grp { 483 fsl,pins = < 484 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 485 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 486 >; 487 }; 488 489 pinctrl_uart2: uart2grp { 490 fsl,pins = < 491 MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 492 MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 493 >; 494 }; 495 496 pinctrl_usbh1: usbh1grp { 497 fsl,pins = < 498 MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 499 >; 500 }; 501 502 pinctrl_usbh1_vbus: usbh1-vbus { 503 fsl,pins = < 504 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 505 >; 506 }; 507 508 pinctrl_usbotg: usbotggrp { 509 fsl,pins = < 510 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 511 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 512 >; 513 }; 514 515 pinctrl_usbotg_vbus: usbotg-vbus { 516 fsl,pins = < 517 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 518 >; 519 }; 520 521 pinctrl_usdhc3: usdhc3grp { 522 fsl,pins = < 523 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018 524 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018 525 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 526 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 527 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 528 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 529 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 530 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 531 >; 532 }; 533 534 pinctrl_usdhc4: usdhc4grp { 535 fsl,pins = < 536 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 537 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 538 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 539 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 540 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 541 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 542 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 543 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 544 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 545 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 546 >; 547 }; 548 549 pinctrl_wdog: wdoggrp { 550 fsl,pins = < 551 MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 552 >; 553 }; 554}; 555 556&ipu1_di0_disp0 { 557 remote-endpoint = <&lcd_display_in>; 558}; 559 560&pcie { 561 pinctrl-names = "default"; 562 pinctrl-0 = <&pinctrl_pcie>; 563 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; 564 vpcie-supply = <®_pcie>; 565 status = "disabled"; 566}; 567 568&pwm1 { 569 pinctrl-names = "default"; 570 pinctrl-0 = <&pinctrl_pwm1>; 571 status = "disabled"; 572}; 573 574&uart1 { 575 pinctrl-names = "default"; 576 pinctrl-0 = <&pinctrl_uart1>; 577 status = "okay"; 578}; 579 580&uart2 { 581 pinctrl-names = "default"; 582 pinctrl-0 = <&pinctrl_uart2>; 583 status = "okay"; 584}; 585 586&usbh1 { 587 pinctrl-names = "default"; 588 pinctrl-0 = <&pinctrl_usbh1>; 589 vbus-supply = <®_usb_h1_vbus>; 590 over-current-active-low; 591 status = "disabled"; 592}; 593 594&usbotg { 595 pinctrl-names = "default"; 596 pinctrl-0 = <&pinctrl_usbotg>; 597 vbus-supply = <®_usb_otg_vbus>; 598 over-current-active-low; 599 srp-disable; 600 hnp-disable; 601 adp-disable; 602 status = "okay"; 603}; 604 605&usbphy1 { 606 fsl,tx-d-cal = <106>; 607 status = "okay"; 608}; 609 610&usbphy2 { 611 fsl,tx-d-cal = <109>; 612 status = "disabled"; 613}; 614 615&usdhc3 { 616 pinctrl-names = "default"; 617 pinctrl-0 = <&pinctrl_usdhc3>; 618 bus-width = <4>; 619 cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; 620 wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; 621 no-1-8-v; 622 keep-power-in-suspend; 623 wakeup-source; 624 vmmc-supply = <&sw2_reg>; 625 status = "disabled"; 626}; 627 628&usdhc4 { 629 pinctrl-names = "default"; 630 pinctrl-0 = <&pinctrl_usdhc4>; 631 bus-width = <8>; 632 non-removable; 633 no-1-8-v; 634 keep-power-in-suspend; 635 vmmc-supply = <&sw2_reg>; 636 status = "okay"; 637}; 638 639&wdog1 { 640 status = "disabled"; 641}; 642 643&wdog2 { 644 pinctrl-names = "default"; 645 pinctrl-0 = <&pinctrl_wdog>; 646 fsl,ext-reset-output; 647 status = "okay"; 648}; 649