xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/imx/imx53-m53menlo.dts (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (C) 2019 Marek Vasut <marex@denx.de>
4 */
5
6/dts-v1/;
7#include "imx53-m53.dtsi"
8
9/ {
10	model = "MENLO M53 EMBEDDED DEVICE";
11	compatible = "menlo,m53menlo", "fsl,imx53";
12
13	gpio-keys {
14		compatible = "gpio-keys";
15		pinctrl-0 = <&pinctrl_power_button>;
16		pinctrl-names = "default";
17
18		power-button {
19			label = "Power button";
20			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
21			linux,code = <KEY_POWER>;
22		};
23	};
24
25	gpio-poweroff {
26		compatible = "gpio-poweroff";
27		pinctrl-0 = <&pinctrl_power_out>;
28		pinctrl-names = "default";
29		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
30	};
31
32	leds {
33		compatible = "gpio-leds";
34		pinctrl-names = "default";
35		pinctrl-0 = <&pinctrl_led>;
36
37		led-user1 {
38			label = "TestLed601";
39			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
40			linux,default-trigger = "mmc0";
41		};
42
43		led-user2 {
44			label = "TestLed602";
45			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
46			linux,default-trigger = "heartbeat";
47		};
48
49		led-eth {
50			label = "EthLedYe";
51			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
52			linux,default-trigger = "netdev";
53		};
54	};
55
56	lvds-decoder {
57		compatible = "ti,ds90cf364a", "lvds-decoder";
58
59		ports {
60			#address-cells = <1>;
61			#size-cells = <0>;
62
63			port@0 {
64				reg = <0>;
65
66				lvds_decoder_in: endpoint {
67					remote-endpoint = <&lvds0_out>;
68				};
69			};
70
71			port@1 {
72				reg = <1>;
73
74				lvds_decoder_out: endpoint {
75					remote-endpoint = <&panel_in>;
76				};
77			};
78		};
79	};
80
81	panel {
82		compatible = "edt,etm0700g0dh6";
83		pinctrl-0 = <&pinctrl_display_gpio>;
84		pinctrl-names = "default";
85		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
86
87		port {
88			panel_in: endpoint {
89				remote-endpoint = <&lvds_decoder_out>;
90			};
91		};
92	};
93
94	beeper {
95		compatible = "gpio-beeper";
96		pinctrl-0 = <&pinctrl_beeper>;
97		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
98	};
99
100	reg_usbh1_vbus: regulator-usbh1-vbus {
101		compatible = "regulator-fixed";
102		regulator-name = "vbus";
103		regulator-min-microvolt = <5000000>;
104		regulator-max-microvolt = <5000000>;
105		gpio = <&gpio1 2 0>;
106	};
107};
108
109&can1 {
110	pinctrl-names = "default";
111	pinctrl-0 = <&pinctrl_can1>;
112	status = "okay";
113};
114
115&can2 {
116	pinctrl-names = "default";
117	pinctrl-0 = <&pinctrl_can2>;
118	status = "okay";
119};
120
121&clks {
122	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
123			  <&clks IMX5_CLK_CKO1_PODF>,
124			  <&clks IMX5_CLK_CKO1>;
125	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
126	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
127};
128
129&ecspi2 {
130	pinctrl-names = "default";
131	pinctrl-0 = <&pinctrl_ecspi2>;
132	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
133	status = "okay";
134
135	spidev@0 {
136		compatible = "menlo,m53cpld";
137		spi-max-frequency = <25000000>;
138		reg = <0>;
139	};
140
141	spidev@1 {
142		compatible = "menlo,m53cpld";
143		spi-max-frequency = <25000000>;
144		reg = <1>;
145	};
146};
147
148&esdhc1 {
149	pinctrl-names = "default";
150	pinctrl-0 = <&pinctrl_esdhc1>;
151	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
152	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
153	status = "okay";
154};
155
156&fec {
157	pinctrl-names = "default";
158	pinctrl-0 = <&pinctrl_fec>;
159	phy-mode = "rmii";
160	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
161	status = "okay";
162};
163
164&gpio1 {
165	gpio-line-names =
166		"", "", "", "",
167		"", "", "", "",
168		"", "", "", "",
169		"", "", "", "",
170		"", "", "", "",
171		"", "", "", "",
172		"", "", "", "",
173		"", "", "", "";
174};
175
176&gpio2 {
177	gpio-line-names =
178		"", "", "", "",
179		"", "", "", "",
180		"TestPin_SV2_3", "", "", "",
181		"", "", "", "",
182		"", "", "", "",
183		"", "", "", "",
184		"", "", "", "",
185		"", "", "", "";
186};
187
188&gpio3 {
189	gpio-line-names =
190		"", "", "", "",
191		"", "", "", "",
192		"", "", "", "",
193		"", "", "", "",
194		"", "", "", "",
195		"", "", "", "",
196		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
197		"", "CPLD_JTAG_TDO", "", "";
198};
199
200&gpio5 {
201	gpio-line-names =
202		"", "", "", "",
203		"", "", "", "",
204		"", "", "", "",
205		"", "", "", "",
206		"", "", "CPLD_JTAG_TCK", "KBD_intK",
207		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
208		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
209		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
210};
211
212&gpio6 {
213	gpio-line-names =
214		"", "", "", "",
215		"CPLD_reset", "", "", "",
216		"", "", "", "",
217		"", "", "", "",
218		"", "", "", "",
219		"", "", "", "",
220		"", "", "", "",
221		"", "", "", "";
222};
223
224&gpio7 {
225	gpio-line-names =
226		"", "", "", "",
227		"", "", "", "",
228		"", "", "", "",
229		"", "USB-OTG_OverCurrent", "", "",
230		"", "", "", "",
231		"", "", "", "",
232		"", "", "", "",
233		"", "", "", "";
234};
235
236&i2c1 {
237	pinctrl-names = "default";
238	pinctrl-0 = <&pinctrl_i2c1>;
239	status = "okay";
240
241	touchscreen@38 {
242		compatible = "edt,edt-ft5x06";
243		reg = <0x38>;
244		pinctrl-names = "default";
245		pinctrl-0 = <&pinctrl_edt_ft5x06>;
246		interrupt-parent = <&gpio6>;
247		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
248		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
249		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
250	};
251
252	eeprom@50 {
253		compatible = "atmel,24c64";
254		reg = <0x50>;
255		pagesize = <32>;
256	};
257
258	dac@60 {
259		compatible = "microchip,mcp4725";
260		reg = <0x60>;
261	};
262};
263
264&i2c2 {
265	touchscreen@41 {
266		status = "disabled";
267	};
268};
269
270&i2c3 {
271	pinctrl-names = "default";
272	pinctrl-0 = <&pinctrl_i2c3>;
273	status = "okay";
274};
275
276&iomuxc {
277	pinctrl-names = "default";
278	pinctrl-0 = <&pinctrl_hog>;
279
280	imx53-m53evk {
281		hoggrp {
282			fsl,pins = <
283				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
284				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
285				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
286				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
287				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
288				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
289				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
290				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
291				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
292				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
293				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
294				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
295				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
296				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
297				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
298				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
299				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
300				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
301			>;
302		};
303
304		pinctrl_led: ledgrp {
305			fsl,pins = <
306				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
307				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
308			>;
309		};
310
311		pinctrl_beeper: beepergrp {
312			fsl,pins = <
313				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
314			>;
315		};
316
317		pinctrl_can1: can1grp {
318			fsl,pins = <
319				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
320				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
321			>;
322		};
323
324		pinctrl_can2: can2grp {
325			fsl,pins = <
326				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
327				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
328			>;
329		};
330
331		pinctrl_display_gpio: display-gpiogrp {
332			fsl,pins = <
333				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
334				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
335				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
336
337				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
338			>;
339		};
340
341		pinctrl_edt_ft5x06: edt-ft5x06grp {
342			fsl,pins = <
343				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
344				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
345				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
346			>;
347		};
348
349		pinctrl_ecspi2: ecspi2grp {
350			fsl,pins = <
351				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
352				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
353				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
354				MX53_PAD_EIM_RW__GPIO2_26		0xe4
355				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
356			>;
357		};
358
359		pinctrl_esdhc1: esdhc1grp {
360			fsl,pins = <
361				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
362				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
363				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
364				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
365				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
366				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
367				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
368				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
369			>;
370		};
371
372		pinctrl_fec: fecgrp {
373			fsl,pins = <
374				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
375				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
376				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
377				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
378				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
379				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
380				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
381				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
382				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
383				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
384				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
385				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
386			>;
387		};
388
389		pinctrl_i2c1: i2c1grp {
390			fsl,pins = <
391				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
392				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
393			>;
394		};
395
396		pinctrl_i2c3: i2c3grp {
397			fsl,pins = <
398				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
399				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
400			>;
401		};
402
403		pinctrl_lvds0: lvds0grp {
404			/* LVDS pins only have pin mux configuration */
405			fsl,pins = <
406				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
407				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
408				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
409				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
410				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
411			>;
412		};
413
414		pinctrl_power_button: powerbutgrp {
415			fsl,pins = <
416				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
417			>;
418		};
419
420		pinctrl_power_out: poweroutgrp {
421			fsl,pins = <
422				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
423			>;
424		};
425
426		pinctrl_uart1: uart1grp {
427			fsl,pins = <
428				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
429				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
430				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
431				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
432			>;
433		};
434
435		pinctrl_uart2: uart2grp {
436			fsl,pins = <
437				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
438				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
439				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
440				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
441			>;
442		};
443
444		pinctrl_uart3: uart3grp {
445			fsl,pins = <
446				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
447				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
448				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
449			>;
450		};
451
452		pinctrl_usb: usbgrp {
453			fsl,pins = <
454				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
455				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
456				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
457				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
458			>;
459		};
460	};
461};
462
463&ldb {
464	pinctrl-names = "default";
465	pinctrl-0 = <&pinctrl_lvds0>;
466	status = "okay";
467
468	lvds0: lvds-channel@0 {
469		reg = <0>;
470		fsl,data-mapping = "spwg";
471		fsl,data-width = <18>;
472		status = "okay";
473
474		port@2 {
475			reg = <2>;
476
477			lvds0_out: endpoint {
478				remote-endpoint = <&lvds_decoder_in>;
479			};
480		};
481	};
482};
483
484&uart1 {
485	pinctrl-names = "default";
486	pinctrl-0 = <&pinctrl_uart1>;
487	uart-has-rtscts;
488	status = "okay";
489};
490
491&uart2 {
492	pinctrl-names = "default";
493	pinctrl-0 = <&pinctrl_uart2>;
494	uart-has-rtscts;
495	status = "okay";
496};
497
498&uart3 {
499	pinctrl-names = "default";
500	pinctrl-0 = <&pinctrl_uart3>;
501	linux,rs485-enabled-at-boot-time;
502	status = "okay";
503};
504
505&usbh1 {
506	pinctrl-names = "default";
507	pinctrl-0 = <&pinctrl_usb>;
508	vbus-supply = <&reg_usbh1_vbus>;
509	phy_type = "utmi";
510	dr_mode = "host";
511	status = "okay";
512};
513
514&usbotg {
515	dr_mode = "peripheral";
516	status = "okay";
517};
518