xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/imx/imx53-m53evk.dts (revision f5f40dd63bc7acbb5312b26ac1ea1103c12352a6) 
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
4 */
5
6/dts-v1/;
7#include "imx53-m53.dtsi"
8
9/ {
10	model = "Aries/DENX M53EVK";
11	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
12
13	display1: disp1 {
14		compatible = "fsl,imx-parallel-display";
15		interface-pix-fmt = "bgr666";
16		pinctrl-names = "default";
17		pinctrl-0 = <&pinctrl_ipu_disp1>;
18
19		display-timings {
20			800x480p60 {
21				native-mode;
22				clock-frequency = <31500000>;
23				hactive = <800>;
24				vactive = <480>;
25				hfront-porch = <40>;
26				hback-porch = <88>;
27				hsync-len = <128>;
28				vback-porch = <33>;
29				vfront-porch = <9>;
30				vsync-len = <3>;
31				vsync-active = <1>;
32			};
33		};
34
35		port {
36			display1_in: endpoint {
37				remote-endpoint = <&ipu_di1_disp1>;
38			};
39		};
40	};
41
42	backlight {
43		compatible = "pwm-backlight";
44		pwms = <&pwm1 0 3000>;
45		brightness-levels = <0 4 8 16 32 64 128 255>;
46		default-brightness-level = <6>;
47		power-supply = <&reg_backlight>;
48	};
49
50	leds {
51		compatible = "gpio-leds";
52		pinctrl-names = "default";
53		pinctrl-0 = <&led_pin_gpio>;
54
55		led-user1 {
56			label = "user1";
57			gpios = <&gpio2 8 0>;
58			linux,default-trigger = "heartbeat";
59		};
60
61		led-user2 {
62			label = "user2";
63			gpios = <&gpio2 9 0>;
64			linux,default-trigger = "heartbeat";
65		};
66	};
67
68	reg_usbh1_vbus: regulator-usbh1-vbus {
69		compatible = "regulator-fixed";
70		regulator-name = "vbus";
71		regulator-min-microvolt = <5000000>;
72		regulator-max-microvolt = <5000000>;
73		gpio = <&gpio1 2 0>;
74	};
75
76	reg_usb_otg_vbus: regulator-usb-otg-vbus {
77		compatible = "regulator-fixed";
78		regulator-name = "usb_otg_vbus";
79		regulator-min-microvolt = <5000000>;
80		regulator-max-microvolt = <5000000>;
81		gpio = <&gpio1 4 0>;
82	};
83
84	sound {
85		compatible = "fsl,imx53-m53evk-sgtl5000",
86			     "fsl,imx-audio-sgtl5000";
87		model = "imx53-m53evk-sgtl5000";
88		ssi-controller = <&ssi2>;
89		audio-codec = <&sgtl5000>;
90		audio-routing =
91			"MIC_IN", "Mic Jack",
92			"Mic Jack", "Mic Bias",
93			"LINE_IN", "Line In Jack",
94			"Headphone Jack", "HP_OUT",
95			"Ext Spk", "LINE_OUT";
96		mux-int-port = <2>;
97		mux-ext-port = <4>;
98	};
99};
100
101&audmux {
102	pinctrl-names = "default";
103	pinctrl-0 = <&pinctrl_audmux>;
104	status = "okay";
105};
106
107&can1 {
108	pinctrl-names = "default";
109	pinctrl-0 = <&pinctrl_can1>;
110	status = "okay";
111};
112
113&can2 {
114	pinctrl-names = "default";
115	pinctrl-0 = <&pinctrl_can2>;
116	status = "okay";
117};
118
119&esdhc1 {
120	pinctrl-names = "default";
121	pinctrl-0 = <&pinctrl_esdhc1>;
122	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
123	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
124	status = "okay";
125};
126
127&fec {
128	pinctrl-names = "default";
129	pinctrl-0 = <&pinctrl_fec>;
130	phy-mode = "rmii";
131	status = "okay";
132};
133
134&i2c1 {
135	pinctrl-names = "default";
136	pinctrl-0 = <&pinctrl_i2c1>;
137	status = "okay";
138
139	sgtl5000: codec@a {
140		compatible = "fsl,sgtl5000";
141		reg = <0x0a>;
142		#sound-dai-cells = <0>;
143		VDDA-supply = <&reg_3p2v>;
144		VDDIO-supply = <&reg_3p2v>;
145		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
146	};
147};
148
149&i2c3 {
150	pinctrl-names = "default";
151	pinctrl-0 = <&pinctrl_i2c3>;
152	status = "okay";
153};
154
155&iomuxc {
156	pinctrl-names = "default";
157	pinctrl-0 = <&pinctrl_hog>;
158
159	imx53-m53evk {
160		pinctrl_usb: usbgrp {
161			fsl,pins = <
162				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
163				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
164			>;
165		};
166
167		pinctrl_usbotg: usbotggrp {
168			fsl,pins = <
169				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
170			>;
171		};
172
173		led_pin_gpio: led_gpio {
174			fsl,pins = <
175				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
176				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
177			>;
178		};
179
180		pinctrl_audmux: audmuxgrp {
181			fsl,pins = <
182				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
183				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
184				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
185				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
186			>;
187		};
188
189		pinctrl_can1: can1grp {
190			fsl,pins = <
191				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
192				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
193			>;
194		};
195
196		pinctrl_can2: can2grp {
197			fsl,pins = <
198				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
199				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
200			>;
201		};
202
203		pinctrl_esdhc1: esdhc1grp {
204			fsl,pins = <
205				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
206				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
207				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
208				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
209				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
210				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
211			>;
212		};
213
214		pinctrl_fec: fecgrp {
215			fsl,pins = <
216				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
217				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
218				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
219				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
220				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
221				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
222				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
223				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
224				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
225				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
226			>;
227		};
228
229		pinctrl_i2c1: i2c1grp {
230			fsl,pins = <
231				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
232				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
233			>;
234		};
235
236		pinctrl_i2c3: i2c3grp {
237			fsl,pins = <
238				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
239				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
240			>;
241		};
242
243		pinctrl_ipu_disp1: ipudisp1grp {
244			fsl,pins = <
245				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
246				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
247				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
248				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
249				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
250				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
251				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
252				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
253				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
254				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
255				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
256				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
257				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
258				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
259				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
260				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
261				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
262				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
263				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
264				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
265				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
266				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
267				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
268				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
269				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
270				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
271				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
272				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
273				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
274				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
275				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
276				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
277			>;
278		};
279
280		pinctrl_pwm1: pwm1grp {
281			fsl,pins = <
282				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
283			>;
284		};
285
286		pinctrl_uart1: uart1grp {
287			fsl,pins = <
288				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
289				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
290			>;
291		};
292
293		pinctrl_uart2: uart2grp {
294			fsl,pins = <
295				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
296				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
297			>;
298		};
299
300		pinctrl_uart3: uart3grp {
301			fsl,pins = <
302				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
303				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
304				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
305				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
306			>;
307		};
308	};
309};
310
311&ipu_di1_disp1 {
312	remote-endpoint = <&display1_in>;
313};
314
315&pwm1 {
316	#pwm-cells = <2>;
317	pinctrl-names = "default";
318	pinctrl-0 = <&pinctrl_pwm1>;
319	status = "okay";
320};
321
322&sata {
323	status = "okay";
324};
325
326&ssi2 {
327	status = "okay";
328};
329
330&uart1 {
331	pinctrl-names = "default";
332	pinctrl-0 = <&pinctrl_uart1>;
333	status = "okay";
334};
335
336&uart2 {
337	pinctrl-names = "default";
338	pinctrl-0 = <&pinctrl_uart2>;
339	status = "okay";
340};
341
342&uart3 {
343	pinctrl-names = "default";
344	pinctrl-0 = <&pinctrl_uart3>;
345	status = "okay";
346};
347
348&usbh1 {
349	pinctrl-names = "default";
350	pinctrl-0 = <&pinctrl_usb>;
351	vbus-supply = <&reg_usbh1_vbus>;
352	phy_type = "utmi";
353	status = "okay";
354};
355
356&usbotg {
357	pinctrl-names = "default";
358	pinctrl-0 = <&pinctrl_usbotg>;
359	dr_mode = "otg";
360	vbus-supply = <&reg_usb_otg_vbus>;
361	disable-over-current;
362	status = "okay";
363};
364