xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145) 
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
4 */
5
6/dts-v1/;
7#include "imx27.dtsi"
8
9/ {
10	model = "Eukrea CPUIMX27";
11	compatible = "eukrea,cpuimx27", "fsl,imx27";
12
13	memory@a0000000 {
14		device_type = "memory";
15		reg = <0xa0000000 0x04000000>;
16	};
17
18	clk14745600: clk-uart {
19		compatible = "fixed-clock";
20		#clock-cells = <0>;
21		clock-frequency = <14745600>;
22	};
23};
24
25&fec {
26	pinctrl-names = "default";
27	pinctrl-0 = <&pinctrl_fec>;
28	status = "okay";
29};
30
31&i2c1 {
32	pinctrl-names = "default";
33	pinctrl-0 = <&pinctrl_i2c1>;
34	status = "okay";
35
36	pcf8563@51 {
37		compatible = "nxp,pcf8563";
38		reg = <0x51>;
39	};
40};
41
42&nfc {
43	pinctrl-names = "default";
44	pinctrl-0 = <&pinctrl_nfc>;
45	nand-bus-width = <8>;
46	nand-ecc-mode = "hw";
47	nand-on-flash-bbt;
48	status = "okay";
49};
50
51&owire {
52	pinctrl-names = "default";
53	pinctrl-0 = <&pinctrl_owire>;
54	status = "okay";
55};
56
57&sdhci2 {
58	pinctrl-names = "default";
59	pinctrl-0 = <&pinctrl_sdhc2>;
60	bus-width = <4>;
61	non-removable;
62	status = "okay";
63};
64
65&uart4 {
66	pinctrl-names = "default";
67	pinctrl-0 = <&pinctrl_uart4>;
68	uart-has-rtscts;
69	status = "okay";
70};
71
72&usbh2 {
73	pinctrl-names = "default";
74	pinctrl-0 = <&pinctrl_usbh2>;
75	dr_mode = "host";
76	phy_type = "ulpi";
77	disable-over-current;
78	status = "okay";
79};
80
81&usbotg {
82	pinctrl-names = "default";
83	pinctrl-0 = <&pinctrl_usbotg>;
84	dr_mode = "otg";
85	phy_type = "ulpi";
86	disable-over-current;
87	status = "okay";
88};
89
90&weim {
91	status = "okay";
92
93	nor: nor@0,0 {
94		#address-cells = <1>;
95		#size-cells = <1>;
96		compatible = "cfi-flash";
97		reg = <0 0x00000000 0x04000000>;
98		bank-width = <2>;
99		linux,mtd-name = "physmap-flash.0";
100		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
101	};
102
103	uart8250@3,200000 {
104		pinctrl-names = "default";
105		pinctrl-0 = <&pinctrl_uart8250_1>;
106		compatible = "ns8250";
107		clocks = <&clk14745600>;
108		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
109		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
110		reg = <3 0x200000 0x1000>;
111		reg-shift = <1>;
112		reg-io-width = <1>;
113		no-loopback-test;
114	};
115
116	uart8250@3,400000 {
117		pinctrl-names = "default";
118		pinctrl-0 = <&pinctrl_uart8250_2>;
119		compatible = "ns8250";
120		clocks = <&clk14745600>;
121		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
122		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
123		reg = <3 0x400000 0x1000>;
124		reg-shift = <1>;
125		reg-io-width = <1>;
126		no-loopback-test;
127	};
128
129	uart8250@3,800000 {
130		pinctrl-names = "default";
131		pinctrl-0 = <&pinctrl_uart8250_3>;
132		compatible = "ns8250";
133		clocks = <&clk14745600>;
134		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
135		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
136		reg = <3 0x800000 0x1000>;
137		reg-shift = <1>;
138		reg-io-width = <1>;
139		no-loopback-test;
140	};
141
142	uart8250@3,1000000 {
143		pinctrl-names = "default";
144		pinctrl-0 = <&pinctrl_uart8250_4>;
145		compatible = "ns8250";
146		clocks = <&clk14745600>;
147		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
148		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
149		reg = <3 0x1000000 0x1000>;
150		reg-shift = <1>;
151		reg-io-width = <1>;
152		no-loopback-test;
153	};
154};
155
156&iomuxc {
157	imx27-eukrea-cpuimx27 {
158		pinctrl_fec: fecgrp {
159			fsl,pins = <
160				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
161				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
162				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
163				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
164				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
165				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
166				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
167				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
168				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
169				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
170				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
171				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
172				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
173				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
174				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
175				MX27_PAD_ATA_DATA13__FEC_COL		0x0
176				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
177				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
178			>;
179		};
180
181		pinctrl_i2c1: i2c1grp {
182			fsl,pins = <
183				MX27_PAD_I2C_DATA__I2C_DATA		0x0
184				MX27_PAD_I2C_CLK__I2C_CLK		0x0
185			>;
186		};
187
188		pinctrl_nfc: nfcgrp {
189			fsl,pins = <
190				MX27_PAD_NFRB__NFRB			0x0
191				MX27_PAD_NFCLE__NFCLE			0x0
192				MX27_PAD_NFWP_B__NFWP_B			0x0
193				MX27_PAD_NFCE_B__NFCE_B			0x0
194				MX27_PAD_NFALE__NFALE			0x0
195				MX27_PAD_NFRE_B__NFRE_B			0x0
196				MX27_PAD_NFWE_B__NFWE_B			0x0
197			>;
198		};
199
200		pinctrl_owire: owiregrp {
201			fsl,pins = <
202				MX27_PAD_RTCK__OWIRE			0x0
203			>;
204		};
205
206		pinctrl_sdhc2: sdhc2grp {
207			fsl,pins = <
208				MX27_PAD_SD2_CLK__SD2_CLK		0x0
209				MX27_PAD_SD2_CMD__SD2_CMD		0x0
210				MX27_PAD_SD2_D0__SD2_D0			0x0
211				MX27_PAD_SD2_D1__SD2_D1			0x0
212				MX27_PAD_SD2_D2__SD2_D2			0x0
213				MX27_PAD_SD2_D3__SD2_D3			0x0
214			>;
215		};
216
217		pinctrl_uart4: uart4grp {
218			fsl,pins = <
219				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
220				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
221				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
222				MX27_PAD_USBH1_FS__UART4_RTS		0x0
223			>;
224		};
225
226		pinctrl_uart8250_1: uart82501grp {
227			fsl,pins = <
228				MX27_PAD_USB_PWR__GPIO2_23		0x0
229			>;
230		};
231
232		pinctrl_uart8250_2: uart82502grp {
233			fsl,pins = <
234				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
235			>;
236		};
237
238		pinctrl_uart8250_3: uart82503grp {
239			fsl,pins = <
240				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
241			>;
242		};
243
244		pinctrl_uart8250_4: uart82504grp {
245			fsl,pins = <
246				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
247			>;
248		};
249
250		pinctrl_usbh2: usbh2grp {
251			fsl,pins = <
252				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
253				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
254				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
255				MX27_PAD_USBH2_STP__USBH2_STP		0x0
256				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
257				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
258				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
259				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
260				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
261				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
262				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
263				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
264			>;
265		};
266
267		pinctrl_usbotg: usbotggrp {
268			fsl,pins = <
269				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
270				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
271				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
272				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
273				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
274				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
275				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
276				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
277				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
278				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
279				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
280				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
281			>;
282		};
283	};
284};
285