1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * ethernut5.dts - Device Tree file for Ethernut 5 board 4 * 5 * Copyright (C) 2012 egnite GmbH <info@egnite.de> 6 */ 7/dts-v1/; 8#include "at91sam9xe.dtsi" 9 10/ { 11 model = "Ethernut 5"; 12 compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9"; 13 14 chosen { 15 bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2"; 16 }; 17 18 memory@20000000 { 19 reg = <0x20000000 0x08000000>; 20 }; 21 22 clocks { 23 slow_xtal { 24 clock-frequency = <32768>; 25 }; 26 27 main_xtal { 28 clock-frequency = <18432000>; 29 }; 30 }; 31 32 ahb { 33 apb { 34 dbgu: serial@fffff200 { 35 status = "okay"; 36 }; 37 38 tcb0: timer@fffa0000 { 39 timer@0 { 40 compatible = "atmel,tcb-timer"; 41 reg = <0>, <1>; 42 }; 43 44 timer@2 { 45 compatible = "atmel,tcb-timer"; 46 reg = <2>; 47 }; 48 }; 49 50 usart0: serial@fffb0000 { 51 status = "okay"; 52 }; 53 54 usart1: serial@fffb4000 { 55 status = "okay"; 56 }; 57 58 macb0: ethernet@fffc4000 { 59 phy-mode = "rmii"; 60 status = "okay"; 61 }; 62 63 usb1: gadget@fffa4000 { 64 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; 65 status = "okay"; 66 }; 67 }; 68 69 ebi: ebi@10000000 { 70 status = "okay"; 71 72 nand_controller: nand-controller { 73 status = "okay"; 74 pinctrl-0 = <&pinctrl_nand_cs>; 75 pinctrl-names = "default"; 76 77 nand: nand@3 { 78 reg = <0x3 0x0 0x800000>; 79 cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; 80 nand-bus-width = <8>; 81 nand-ecc-mode = "soft"; 82 nand-on-flash-bbt; 83 label = "atmel_nand"; 84 85 partitions { 86 compatible = "fixed-partitions"; 87 #address-cells = <1>; 88 #size-cells = <1>; 89 90 root@0 { 91 label = "root"; 92 reg = <0x0 0x08000000>; 93 }; 94 95 data@20000 { 96 label = "data"; 97 reg = <0x08000000 0x38000000>; 98 }; 99 }; 100 }; 101 }; 102 }; 103 104 usb0: ohci@500000 { 105 num-ports = <2>; 106 status = "okay"; 107 }; 108 }; 109 110 i2c-gpio-0 { 111 status = "okay"; 112 113 pcf8563@50 { 114 compatible = "nxp,pcf8563"; 115 reg = <0x51>; 116 }; 117 }; 118}; 119