xref: /freebsd/sys/contrib/device-tree/src/arm/microchip/at91sam9n12.dtsi (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
4 *
5 *  Copyright (C) 2012 Atmel,
6 *                2012 Hong Xu <hong.xu@atmel.com>
7 */
8
9#include <dt-bindings/dma/at91.h>
10#include <dt-bindings/pinctrl/at91.h>
11#include <dt-bindings/interrupt-controller/irq.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/clock/at91.h>
14#include <dt-bindings/mfd/at91-usart.h>
15
16/ {
17	#address-cells = <1>;
18	#size-cells = <1>;
19	model = "Atmel AT91SAM9N12 SoC";
20	compatible = "atmel,at91sam9n12";
21	interrupt-parent = <&aic>;
22
23	aliases {
24		serial0 = &dbgu;
25		serial1 = &usart0;
26		serial2 = &usart1;
27		serial3 = &usart2;
28		serial4 = &usart3;
29		gpio0 = &pioA;
30		gpio1 = &pioB;
31		gpio2 = &pioC;
32		gpio3 = &pioD;
33		tcb0 = &tcb0;
34		tcb1 = &tcb1;
35		i2c0 = &i2c0;
36		i2c1 = &i2c1;
37		ssc0 = &ssc0;
38		pwm0 = &pwm0;
39	};
40	cpus {
41		#address-cells = <1>;
42		#size-cells = <0>;
43
44		cpu@0 {
45			compatible = "arm,arm926ej-s";
46			device_type = "cpu";
47			reg = <0>;
48		};
49	};
50
51	memory@20000000 {
52		device_type = "memory";
53		reg = <0x20000000 0x10000000>;
54	};
55
56	clocks {
57		slow_xtal: slow_xtal {
58			compatible = "fixed-clock";
59			#clock-cells = <0>;
60			clock-frequency = <0>;
61		};
62
63		main_xtal: main_xtal {
64			compatible = "fixed-clock";
65			#clock-cells = <0>;
66			clock-frequency = <0>;
67		};
68	};
69
70	sram: sram@300000 {
71		compatible = "mmio-sram";
72		reg = <0x00300000 0x8000>;
73		#address-cells = <1>;
74		#size-cells = <1>;
75		ranges = <0 0x00300000 0x8000>;
76	};
77
78	ahb {
79		compatible = "simple-bus";
80		#address-cells = <1>;
81		#size-cells = <1>;
82		ranges;
83
84		apb {
85			compatible = "simple-bus";
86			#address-cells = <1>;
87			#size-cells = <1>;
88			ranges;
89
90			aic: interrupt-controller@fffff000 {
91				#interrupt-cells = <3>;
92				compatible = "atmel,at91rm9200-aic";
93				interrupt-controller;
94				reg = <0xfffff000 0x200>;
95				atmel,external-irqs = <31>;
96			};
97
98			matrix: matrix@ffffde00 {
99				compatible = "atmel,at91sam9n12-matrix", "syscon";
100				reg = <0xffffde00 0x100>;
101			};
102
103			pmecc: ecc-engine@ffffe000 {
104				compatible = "atmel,at91sam9g45-pmecc";
105				reg = <0xffffe000 0x600>,
106				      <0xffffe600 0x200>;
107			};
108
109			ramc0: ramc@ffffe800 {
110				compatible = "atmel,at91sam9g45-ddramc";
111				reg = <0xffffe800 0x200>;
112				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
113				clock-names = "ddrck";
114			};
115
116			smc: smc@ffffea00 {
117				compatible = "atmel,at91sam9260-smc", "syscon";
118				reg = <0xffffea00 0x200>;
119			};
120
121			pmc: clock-controller@fffffc00 {
122				compatible = "atmel,at91sam9n12-pmc", "syscon";
123				reg = <0xfffffc00 0x200>;
124				#clock-cells = <2>;
125				clocks = <&clk32k>, <&main_xtal>;
126				clock-names = "slow_clk", "main_xtal";
127				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
128			};
129
130			reset-controller@fffffe00 {
131				compatible = "atmel,at91sam9g45-rstc";
132				reg = <0xfffffe00 0x10>;
133				clocks = <&clk32k>;
134			};
135
136			pit: timer@fffffe30 {
137				compatible = "atmel,at91sam9260-pit";
138				reg = <0xfffffe30 0xf>;
139				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
140				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
141			};
142
143			poweroff@fffffe10 {
144				compatible = "atmel,at91sam9x5-shdwc";
145				reg = <0xfffffe10 0x10>;
146				clocks = <&clk32k>;
147			};
148
149			clk32k: clock-controller@fffffe50 {
150				compatible = "atmel,at91sam9x5-sckc";
151				reg = <0xfffffe50 0x4>;
152				clocks = <&slow_xtal>;
153				#clock-cells = <0>;
154			};
155
156			mmc0: mmc@f0008000 {
157				compatible = "atmel,hsmci";
158				reg = <0xf0008000 0x600>;
159				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
160				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
161				dma-names = "rxtx";
162				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
163				clock-names = "mci_clk";
164				#address-cells = <1>;
165				#size-cells = <0>;
166				status = "disabled";
167			};
168
169			tcb0: timer@f8008000 {
170				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
171				#address-cells = <1>;
172				#size-cells = <0>;
173				reg = <0xf8008000 0x100>;
174				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
175				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
176				clock-names = "t0_clk", "slow_clk";
177			};
178
179			tcb1: timer@f800c000 {
180				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
181				#address-cells = <1>;
182				#size-cells = <0>;
183				reg = <0xf800c000 0x100>;
184				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
185				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
186				clock-names = "t0_clk", "slow_clk";
187			};
188
189			hlcdc: hlcdc@f8038000 {
190				compatible = "atmel,at91sam9n12-hlcdc";
191				reg = <0xf8038000 0x2000>;
192				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
193				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
194				clock-names = "periph_clk", "sys_clk", "slow_clk";
195				status = "disabled";
196
197				hlcdc-display-controller {
198					compatible = "atmel,hlcdc-display-controller";
199					#address-cells = <1>;
200					#size-cells = <0>;
201
202					port@0 {
203						#address-cells = <1>;
204						#size-cells = <0>;
205						reg = <0>;
206					};
207				};
208
209				hlcdc_pwm: hlcdc-pwm {
210					compatible = "atmel,hlcdc-pwm";
211					pinctrl-names = "default";
212					pinctrl-0 = <&pinctrl_lcd_pwm>;
213					#pwm-cells = <3>;
214				};
215			};
216
217			dma: dma-controller@ffffec00 {
218				compatible = "atmel,at91sam9g45-dma";
219				reg = <0xffffec00 0x200>;
220				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
221				#dma-cells = <2>;
222				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
223				clock-names = "dma_clk";
224			};
225
226			pinctrl@fffff400 {
227				#address-cells = <1>;
228				#size-cells = <1>;
229				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
230				ranges = <0xfffff400 0xfffff400 0x800>;
231
232				atmel,mux-mask = <
233				      /*    A         B          C     */
234				       0xffffffff 0xffe07983 0x00000000  /* pioA */
235				       0x00040000 0x00047e0f 0x00000000  /* pioB */
236				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
237				       0x003fffff 0x003f8000 0x00000000  /* pioD */
238				      >;
239
240				/* shared pinctrl settings */
241				dbgu {
242					pinctrl_dbgu: dbgu-0 {
243						atmel,pins =
244							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
245							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
246					};
247				};
248
249				lcd {
250					pinctrl_lcd_base: lcd-base-0 {
251						atmel,pins =
252							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
253							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
254							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
255							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
256							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
257					};
258
259					pinctrl_lcd_pwm: lcd-pwm-0 {
260						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
261					};
262
263					pinctrl_lcd_rgb888: lcd-rgb-3 {
264						atmel,pins =
265							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
266							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
267							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
268							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
269							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
270							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
271							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
272							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
273							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
274							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
275							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
276							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
277							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
278							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
279							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
280							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
281							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
282							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
283							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
284							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
285							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
286							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
287							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
288							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
289					};
290				};
291
292				usart0 {
293					pinctrl_usart0: usart0-0 {
294						atmel,pins =
295							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
296							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
297					};
298
299					pinctrl_usart0_rts: usart0_rts-0 {
300						atmel,pins =
301							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
302					};
303
304					pinctrl_usart0_cts: usart0_cts-0 {
305						atmel,pins =
306							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
307					};
308				};
309
310				usart1 {
311					pinctrl_usart1: usart1-0 {
312						atmel,pins =
313							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
314							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
315					};
316				};
317
318				usart2 {
319					pinctrl_usart2: usart2-0 {
320						atmel,pins =
321							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
322							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
323					};
324
325					pinctrl_usart2_rts: usart2_rts-0 {
326						atmel,pins =
327							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
328					};
329
330					pinctrl_usart2_cts: usart2_cts-0 {
331						atmel,pins =
332							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
333					};
334				};
335
336				usart3 {
337					pinctrl_usart3: usart3-0 {
338						atmel,pins =
339							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
340							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
341					};
342
343					pinctrl_usart3_rts: usart3_rts-0 {
344						atmel,pins =
345							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
346					};
347
348					pinctrl_usart3_cts: usart3_cts-0 {
349						atmel,pins =
350							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
351					};
352				};
353
354				uart0 {
355					pinctrl_uart0: uart0-0 {
356						atmel,pins =
357							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
358							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
359					};
360				};
361
362				uart1 {
363					pinctrl_uart1: uart1-0 {
364						atmel,pins =
365							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
366							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
367					};
368				};
369
370				nand {
371					pinctrl_nand_rb: nand-rb-0 {
372						atmel,pins =
373							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
374					};
375
376					pinctrl_nand_cs: nand-cs-0 {
377						atmel,pins =
378							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
379					};
380				};
381
382				mmc0 {
383					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
384						atmel,pins =
385							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
386							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
387							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
388					};
389
390					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
391						atmel,pins =
392							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
393							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
394							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
395					};
396
397					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
398						atmel,pins =
399							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
400							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
401							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
402							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
403					};
404				};
405
406				ssc0 {
407					pinctrl_ssc0_tx: ssc0_tx-0 {
408						atmel,pins =
409							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
410							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
411							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
412					};
413
414					pinctrl_ssc0_rx: ssc0_rx-0 {
415						atmel,pins =
416							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
417							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
418							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
419					};
420				};
421
422				spi0 {
423					pinctrl_spi0: spi0-0 {
424						atmel,pins =
425							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
426							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
427							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
428					};
429				};
430
431				spi1 {
432					pinctrl_spi1: spi1-0 {
433						atmel,pins =
434							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
435							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
436							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
437					};
438				};
439
440				i2c0 {
441					pinctrl_i2c0: i2c0-0 {
442						atmel,pins =
443							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
444							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
445					};
446				};
447
448				i2c1 {
449					pinctrl_i2c1: i2c1-0 {
450						atmel,pins =
451							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
452							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
453					};
454				};
455
456				tcb0 {
457					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
458						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
459					};
460
461					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
462						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
463					};
464
465					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
466						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
467					};
468
469					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
470						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
471					};
472
473					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
474						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
475					};
476
477					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
478						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
479					};
480
481					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
482						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
483					};
484
485					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
486						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
487					};
488
489					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
490						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
491					};
492				};
493
494				tcb1 {
495					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
496						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
497					};
498
499					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
500						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
501					};
502
503					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
504						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
505					};
506
507					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
508						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
509					};
510
511					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
512						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
513					};
514
515					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
516						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
517					};
518
519					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
520						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
521					};
522
523					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
524						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
525					};
526
527					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
528						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
529					};
530				};
531
532				pioA: gpio@fffff400 {
533					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
534					reg = <0xfffff400 0x200>;
535					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
536					#gpio-cells = <2>;
537					gpio-controller;
538					interrupt-controller;
539					#interrupt-cells = <2>;
540					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
541				};
542
543				pioB: gpio@fffff600 {
544					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
545					reg = <0xfffff600 0x200>;
546					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
547					#gpio-cells = <2>;
548					gpio-controller;
549					interrupt-controller;
550					#interrupt-cells = <2>;
551					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
552				};
553
554				pioC: gpio@fffff800 {
555					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
556					reg = <0xfffff800 0x200>;
557					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
558					#gpio-cells = <2>;
559					gpio-controller;
560					interrupt-controller;
561					#interrupt-cells = <2>;
562					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
563				};
564
565				pioD: gpio@fffffa00 {
566					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
567					reg = <0xfffffa00 0x200>;
568					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
569					#gpio-cells = <2>;
570					gpio-controller;
571					interrupt-controller;
572					#interrupt-cells = <2>;
573					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
574				};
575			};
576
577			dbgu: serial@fffff200 {
578				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
579				reg = <0xfffff200 0x200>;
580				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
581				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
582				pinctrl-names = "default";
583				pinctrl-0 = <&pinctrl_dbgu>;
584				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
585				clock-names = "usart";
586				status = "disabled";
587			};
588
589			ssc0: ssc@f0010000 {
590				compatible = "atmel,at91sam9g45-ssc";
591				reg = <0xf0010000 0x4000>;
592				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
593				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
594				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
595				dma-names = "tx", "rx";
596				pinctrl-names = "default";
597				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
598				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
599				clock-names = "pclk";
600				status = "disabled";
601			};
602
603			usart0: serial@f801c000 {
604				compatible = "atmel,at91sam9260-usart";
605				reg = <0xf801c000 0x4000>;
606				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
607				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
608				pinctrl-names = "default";
609				pinctrl-0 = <&pinctrl_usart0>;
610				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
611				clock-names = "usart";
612				status = "disabled";
613			};
614
615			usart1: serial@f8020000 {
616				compatible = "atmel,at91sam9260-usart";
617				reg = <0xf8020000 0x4000>;
618				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
619				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
620				pinctrl-names = "default";
621				pinctrl-0 = <&pinctrl_usart1>;
622				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
623				clock-names = "usart";
624				status = "disabled";
625			};
626
627			usart2: serial@f8024000 {
628				compatible = "atmel,at91sam9260-usart";
629				reg = <0xf8024000 0x4000>;
630				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
631				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
632				pinctrl-names = "default";
633				pinctrl-0 = <&pinctrl_usart2>;
634				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
635				clock-names = "usart";
636				status = "disabled";
637			};
638
639			usart3: serial@f8028000 {
640				compatible = "atmel,at91sam9260-usart";
641				reg = <0xf8028000 0x4000>;
642				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
643				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
644				pinctrl-names = "default";
645				pinctrl-0 = <&pinctrl_usart3>;
646				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
647				clock-names = "usart";
648				status = "disabled";
649			};
650
651			i2c0: i2c@f8010000 {
652				compatible = "atmel,at91sam9x5-i2c";
653				reg = <0xf8010000 0x100>;
654				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
655				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
656				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
657				dma-names = "tx", "rx";
658				#address-cells = <1>;
659				#size-cells = <0>;
660				pinctrl-names = "default";
661				pinctrl-0 = <&pinctrl_i2c0>;
662				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
663				status = "disabled";
664			};
665
666			i2c1: i2c@f8014000 {
667				compatible = "atmel,at91sam9x5-i2c";
668				reg = <0xf8014000 0x100>;
669				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
670				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
671				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
672				dma-names = "tx", "rx";
673				#address-cells = <1>;
674				#size-cells = <0>;
675				pinctrl-names = "default";
676				pinctrl-0 = <&pinctrl_i2c1>;
677				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
678				status = "disabled";
679			};
680
681			spi0: spi@f0000000 {
682				#address-cells = <1>;
683				#size-cells = <0>;
684				compatible = "atmel,at91rm9200-spi";
685				reg = <0xf0000000 0x100>;
686				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
687				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
688				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
689				dma-names = "tx", "rx";
690				pinctrl-names = "default";
691				pinctrl-0 = <&pinctrl_spi0>;
692				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
693				clock-names = "spi_clk";
694				status = "disabled";
695			};
696
697			spi1: spi@f0004000 {
698				#address-cells = <1>;
699				#size-cells = <0>;
700				compatible = "atmel,at91rm9200-spi";
701				reg = <0xf0004000 0x100>;
702				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
703				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
704				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
705				dma-names = "tx", "rx";
706				pinctrl-names = "default";
707				pinctrl-0 = <&pinctrl_spi1>;
708				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
709				clock-names = "spi_clk";
710				status = "disabled";
711			};
712
713			watchdog@fffffe40 {
714				compatible = "atmel,at91sam9260-wdt";
715				reg = <0xfffffe40 0x10>;
716				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
717				clocks = <&clk32k>;
718				atmel,watchdog-type = "hardware";
719				atmel,reset-type = "all";
720				atmel,dbg-halt;
721				status = "disabled";
722			};
723
724			rtc@fffffeb0 {
725				compatible = "atmel,at91rm9200-rtc";
726				reg = <0xfffffeb0 0x40>;
727				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
728				clocks = <&clk32k>;
729				status = "disabled";
730			};
731
732			pwm0: pwm@f8034000 {
733				compatible = "atmel,at91sam9rl-pwm";
734				reg = <0xf8034000 0x300>;
735				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
736				#pwm-cells = <3>;
737				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
738				status = "disabled";
739			};
740
741			usb1: gadget@f803c000 {
742				compatible = "atmel,at91sam9260-udc";
743				reg = <0xf803c000 0x4000>;
744				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
745				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
746				clock-names = "pclk", "hclk";
747				status = "disabled";
748			};
749		};
750
751		usb0: ohci@500000 {
752			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
753			reg = <0x00500000 0x00100000>;
754			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
755			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
756			clock-names = "ohci_clk", "hclk", "uhpck";
757			status = "disabled";
758		};
759
760		ebi: ebi@10000000 {
761			compatible = "atmel,at91sam9x5-ebi";
762			#address-cells = <2>;
763			#size-cells = <1>;
764			atmel,smc = <&smc>;
765			atmel,matrix = <&matrix>;
766			reg = <0x10000000 0x60000000>;
767			ranges = <0x0 0x0 0x10000000 0x10000000
768				  0x1 0x0 0x20000000 0x10000000
769				  0x2 0x0 0x30000000 0x10000000
770				  0x3 0x0 0x40000000 0x10000000
771				  0x4 0x0 0x50000000 0x10000000
772				  0x5 0x0 0x60000000 0x10000000>;
773			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
774			status = "disabled";
775
776			nand_controller: nand-controller {
777				compatible = "atmel,at91sam9g45-nand-controller";
778				ecc-engine = <&pmecc>;
779				#address-cells = <2>;
780				#size-cells = <1>;
781				ranges;
782				status = "disabled";
783			};
784		};
785	};
786
787	i2c-gpio-0 {
788		compatible = "i2c-gpio";
789		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
790			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
791			>;
792		i2c-gpio,sda-open-drain;
793		i2c-gpio,scl-open-drain;
794		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
795		#address-cells = <1>;
796		#size-cells = <0>;
797		status = "disabled";
798	};
799};
800