1// SPDX-License-Identifier: GPL-2.0 2/* 3 * at91-wb45n.dtsi - Device Tree file for WB45NBT board 4 * 5 * Copyright (C) 2018 Laird 6 * 7 */ 8 9#include "at91sam9g25.dtsi" 10 11/ { 12 model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; 13 compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; 14 15 chosen { 16 bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw"; 17 stdout-path = "serial0:115200n8"; 18 }; 19 20 memory@20000000 { 21 reg = <0x20000000 0x4000000>; 22 }; 23 24 atheros { 25 compatible = "atheros,ath6kl"; 26 atheros,board-id = "SD32"; 27 }; 28}; 29 30&reset_controller { 31 compatible = "atmel,sama5d3-rstc"; 32}; 33 34&shutdown_controller { 35 atmel,wakeup-mode = "low"; 36}; 37 38&slow_xtal { 39 clock-frequency = <32768>; 40}; 41 42&main_xtal { 43 clock-frequency = <12000000>; 44}; 45 46&ebi { 47 status = "okay"; 48 nand_controller: nand-controller { 49 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>; 50 pinctrl-names = "default"; 51 status = "okay"; 52 53 nand@3 { 54 reg = <0x3 0x0 0x800000>; 55 rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; 56 cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; 57 nand-bus-width = <8>; 58 nand-ecc-mode = "hw"; 59 nand-ecc-strength = <4>; 60 nand-ecc-step-size = <512>; 61 nand-on-flash-bbt; 62 label = "atmel_nand"; 63 64 partitions { 65 compatible = "fixed-partitions"; 66 #address-cells = <1>; 67 #size-cells = <1>; 68 69 at91bootstrap@0 { 70 label = "at91bs"; 71 reg = <0x0 0x20000>; 72 }; 73 74 uboot@20000 { 75 label = "u-boot"; 76 reg = <0x20000 0x80000>; 77 }; 78 79 ubootenv@a0000 { 80 label = "u-boot-env"; 81 reg = <0xa0000 0x20000>; 82 }; 83 84 ubootenv@c0000 { 85 label = "redund-env"; 86 reg = <0xc0000 0x20000>; 87 }; 88 89 kernel-a@e0000 { 90 label = "kernel-a"; 91 reg = <0xe0000 0x280000>; 92 }; 93 94 kernel-b@360000 { 95 label = "kernel-b"; 96 reg = <0x360000 0x280000>; 97 }; 98 99 rootfs-a@5e0000 { 100 label = "rootfs-a"; 101 reg = <0x5e0000 0x2600000>; 102 }; 103 104 rootfs-b@2be0000 { 105 label = "rootfs-b"; 106 reg = <0x2be0000 0x2600000>; 107 }; 108 109 user@51e0000 { 110 label = "user"; 111 reg = <0x51e0000 0x2dc0000>; 112 }; 113 114 logs@7fa0000 { 115 label = "logs"; 116 reg = <0x7fa0000 0x60000>; 117 }; 118 119 }; 120 }; 121 }; 122}; 123 124&usb0 { 125 num-ports = <2>; 126 atmel,vbus-gpio = < 127 &pioB 12 GPIO_ACTIVE_HIGH 128 &pioA 31 GPIO_ACTIVE_HIGH 129 >; 130 atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; 131}; 132 133&macb0 { 134 phy-mode = "rmii"; 135}; 136 137&spi0 { 138 cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>; 139}; 140 141&usb2 { 142 pinctrl-names = "default"; 143 pinctrl-0 = <&pinctrl_board_usb2>; 144 atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; 145}; 146 147&mmc0 { 148 pinctrl-names = "default"; 149 pinctrl-0 = < 150 &pinctrl_mmc0_slot0_clk_cmd_dat0 151 &pinctrl_mmc0_slot0_dat1_3>; 152 slot@0 { 153 reg = <0>; 154 bus-width = <4>; 155 }; 156}; 157 158&pinctrl { 159 usb2 { 160 pinctrl_board_usb2: usb2-board { 161 atmel,pins = 162 <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */ 163 }; 164 }; 165}; 166 167