xref: /freebsd/sys/contrib/device-tree/src/arm/microchip/at91-cosino_mega2560.dts (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
4 *			      Mega 2560 extension
5 *
6 * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
7 *			HCE Engineering
8 *
9 * Derived from at91sam9g35ek.dts by:
10 * 	Copyright (C) 2012 Atmel,
11 *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
12 */
13
14/dts-v1/;
15#include "at91-cosino.dtsi"
16
17/ {
18	model = "HCE Cosino Mega 2560";
19	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
20};
21
22&adc0 {
23	atmel,adc-ts-wires = <4>;
24	atmel,adc-ts-pressure-threshold = <10000>;
25	status = "okay";
26};
27
28&macb0 {
29	phy-mode = "rmii";
30	status = "okay";
31};
32
33&mmc1 {
34	pinctrl-0 = <
35		&pinctrl_mmc1_slot0_clk_cmd_dat0
36		&pinctrl_mmc1_slot0_dat1_3>;
37	pinctrl-names = "default";
38	status = "okay";
39
40	slot@0 {
41		reg = <0>;
42		bus-width = <4>;
43		non-removable;
44	};
45};
46
47&rtc {
48	status = "okay";
49};
50
51&usart1 {
52	status = "okay";
53};
54
55&usart2 {
56	status = "okay";
57};
58
59&usb0 {
60	num-ports = <3>;
61	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
62			   &pioD 19 GPIO_ACTIVE_LOW
63			   &pioD 20 GPIO_ACTIVE_LOW
64			  >;
65	status = "okay";
66};
67
68&usb1 {
69	status = "okay";
70};
71
72&usb2 {
73	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
74	status = "okay";
75};
76