xref: /freebsd/sys/contrib/device-tree/src/arm/marvell/orion5x-netgear-wnr854t.dts (revision f126890ac5386406dadf7c4cfa9566cbb56537c5) 
1// SPDX-License-Identifier: GPL-2.0-only
2// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
3
4/dts-v1/;
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/input.h>
8#include "orion5x-mv88f5181.dtsi"
9
10/ {
11	model = "Netgear WNR854-t";
12	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
13		     "marvell,orion5x";
14	aliases {
15		serial0 = &uart0;
16	};
17
18	memory {
19		device_type = "memory";
20		reg = <0x00000000 0x2000000>; /* 32 MB */
21	};
22
23	chosen {
24		stdout-path = "serial0:115200n8";
25	};
26
27	soc {
28		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
29			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
30			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
31	};
32
33	gpio-keys {
34		compatible = "gpio-keys";
35		pinctrl-0 = <&pmx_reset_button>;
36		pinctrl-names = "default";
37
38		reset {
39			label = "Reset Button";
40			linux,code = <KEY_RESTART>;
41			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
42		};
43	};
44
45	gpio-leds {
46		compatible = "gpio-leds";
47		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
48		pinctrl-names = "default";
49
50		led@0 {
51			label = "wnr854t:green:power";
52			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
53		};
54
55		led@1 {
56			label = "wnr854t:blink:power";
57			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
58		};
59
60		led@2 {
61			label = "wnr854t:green:wan";
62			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
63		};
64	};
65};
66
67&devbus_bootcs {
68	status = "okay";
69
70	devbus,keep-config;
71
72	flash@0 {
73		compatible = "cfi-flash";
74		reg = <0 0x800000>;
75		bank-width = <2>;
76
77		partitions {
78			compatible = "fixed-partitions";
79			#address-cells = <1>;
80			#size-cells = <1>;
81
82			partition@0 {
83				label = "kernel";
84				reg = <0x0 0x100000>;
85			};
86
87			partition@100000 {
88				label = "rootfs";
89				reg = <0x100000 0x660000>;
90			};
91
92			partition@760000 {
93				label = "uboot_env";
94				reg = <0x760000 0x20000>;
95			};
96
97			partition@780000 {
98				label = "uboot";
99				reg = <0x780000 0x80000>;
100				read-only;
101			};
102		};
103	};
104};
105
106&mdio {
107	status = "okay";
108
109	switch: switch@0 {
110		compatible = "marvell,mv88e6085";
111		#address-cells = <1>;
112		#size-cells = <0>;
113		reg = <0>;
114		dsa,member = <0 0>;
115
116		ports {
117			#address-cells = <1>;
118			#size-cells = <0>;
119
120			port@0 {
121				reg = <0>;
122				label = "lan3";
123				phy-handle = <&lan3phy>;
124			};
125
126			port@1 {
127				reg = <1>;
128				label = "lan4";
129				phy-handle = <&lan4phy>;
130			};
131
132			port@2 {
133				reg = <2>;
134				label = "wan";
135				phy-handle = <&wanphy>;
136			};
137
138			port@3 {
139				reg = <3>;
140				ethernet = <&ethport>;
141				phy-mode = "rgmii-id";
142				fixed-link {
143					speed = <1000>;
144					full-duplex;
145				};
146			};
147
148			port@5 {
149				reg = <5>;
150				label = "lan1";
151				phy-handle = <&lan1phy>;
152			};
153
154			port@7 {
155				reg = <7>;
156				label = "lan2";
157				phy-handle = <&lan2phy>;
158			};
159		};
160
161		mdio {
162			#address-cells = <1>;
163			#size-cells = <0>;
164
165			lan3phy: ethernet-phy@0 {
166				/* Marvell 88E1121R (port 1) */
167				compatible = "ethernet-phy-id0141.0cb0",
168					     "ethernet-phy-ieee802.3-c22";
169				reg = <0>;
170				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
171			};
172
173			lan4phy: ethernet-phy@1 {
174				/* Marvell 88E1121R (port 2) */
175				compatible = "ethernet-phy-id0141.0cb0",
176					     "ethernet-phy-ieee802.3-c22";
177				reg = <1>;
178				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
179			};
180
181			wanphy: ethernet-phy@2 {
182				/* Marvell 88E1121R (port 1) */
183				compatible = "ethernet-phy-id0141.0cb0",
184					     "ethernet-phy-ieee802.3-c22";
185				reg = <2>;
186				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
187			};
188
189			lan1phy: ethernet-phy@5 {
190				/* Marvell 88E1112 */
191				compatible = "ethernet-phy-id0141.0cb0",
192					     "ethernet-phy-ieee802.3-c22";
193				reg = <5>;
194				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
195			};
196
197			lan2phy: ethernet-phy@7 {
198				/* Marvell 88E1112 */
199				compatible = "ethernet-phy-id0141.0cb0",
200					     "ethernet-phy-ieee802.3-c22";
201				reg = <7>;
202				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
203			};
204		};
205	};
206};
207
208&eth {
209	status = "okay";
210
211	ethernet-port@0 {
212		/* Hardwired to DSA switch */
213		speed = <1000>;
214		duplex = <1>;
215		phy-mode = "rgmii";
216	};
217};
218
219&pinctrl {
220	pinctrl-0 = <&pmx_pci_gpios>;
221	pinctrl-names = "default";
222
223	pmx_power_led: pmx-power-led {
224		marvell,pins = "mpp0";
225		marvell,function = "gpio";
226	};
227
228	pmx_reset_button: pmx-reset-button {
229		marvell,pins = "mpp1";
230		marvell,function = "gpio";
231	};
232
233	pmx_power_led_blink: pmx-power-led-blink {
234		marvell,pins = "mpp2";
235		marvell,function = "gpio";
236	};
237
238	pmx_wan_led: pmx-wan-led {
239		marvell,pins = "mpp3";
240		marvell,function = "gpio";
241	};
242
243	pmx_pci_gpios: pmx-pci-gpios {
244		marvell,pins = "mpp4";
245		marvell,function = "gpio";
246	};
247};
248
249&uart0 {
250	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
251	status = "okay";
252};
253