xref: /freebsd/sys/contrib/device-tree/src/arm/marvell/kirkwood-openblocks_a7.dts (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree file for OpenBlocks A7 board
4 *
5 * Copyright (C) 2013 Free Electrons
6 *
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
8 *
9 */
10
11/dts-v1/;
12
13#include "kirkwood.dtsi"
14#include "kirkwood-6282.dtsi"
15
16/ {
17	model = "Plat'Home OpenBlocksA7";
18	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
19
20	memory {
21		device_type = "memory";
22		reg = <0x00000000 0x40000000>; /* 1 GB */
23	};
24
25	chosen {
26		bootargs = "console=ttyS0,115200n8 earlyprintk";
27		stdout-path = &uart0;
28	};
29
30	ocp@f1000000 {
31		serial@12000 {
32			status = "okay";
33		};
34
35		serial@12100 {
36			status = "okay";
37		};
38
39		sata@80000 {
40			nr-ports = <1>;
41			status = "okay";
42		};
43
44		i2c@11100 {
45			status = "okay";
46
47			s24c02: s24c02@50 {
48				compatible = "atmel,24c02";
49				reg = <0x50>;
50			};
51		};
52
53		pinctrl: pin-controller@10000 {
54			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
55				     &pmx_gpio_header_gpo>;
56			pinctrl-names = "default";
57
58			pmx_uart0: pmx-uart0 {
59				marvell,pins = "mpp10", "mpp11", "mpp15",
60					"mpp16";
61				marvell,function = "uart0";
62			};
63
64			pmx_uart1: pmx-uart1 {
65				marvell,pins = "mpp13", "mpp14", "mpp8",
66					"mpp9";
67				marvell,function = "uart1";
68			};
69
70			pmx_sysrst: pmx-sysrst {
71				marvell,pins = "mpp6";
72				marvell,function = "sysrst";
73			};
74
75			pmx_dip_switches: pmx-dip-switches {
76				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
77				marvell,function = "gpio";
78			};
79
80			/*
81			 * Accessible on connector J202. The MPP
82			 * listed below are pin 1-7, pin 8 is unused,
83			 * pin 9 is external reset input and pin 10 is
84			 * ground.
85			 */
86			pmx_gpio_header: pmx-gpio-header {
87				marvell,pins = "mpp17", "mpp29", "mpp28",
88					       "mpp35", "mpp34", "mpp40";
89				marvell,function = "gpio";
90			};
91
92			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
93				marvell,pins = "mpp7";
94				marvell,function = "gpo";
95			};
96
97			pmx_gpio_init: pmx-init {
98				marvell,pins = "mpp38";
99				marvell,function = "gpio";
100			};
101
102			pmx_usb_oc: pmx-usb-oc {
103				marvell,pins = "mpp39";
104				marvell,function = "gpio";
105			};
106
107			pmx_leds: pmx-leds {
108				marvell,pins = "mpp41", "mpp42", "mpp43";
109				marvell,function = "gpio";
110			};
111		};
112	};
113
114	gpio-leds {
115		compatible = "gpio-leds";
116		pinctrl-0 = <&pmx_leds>;
117		pinctrl-names = "default";
118
119		led-red {
120			label = "obsa7:red:stat";
121			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
122		};
123
124		led-green {
125			label = "obsa7:green:stat";
126			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
127		};
128
129		led-yellow {
130			label = "obsa7:yellow:stat";
131			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
132		};
133        };
134
135	gpio_keys {
136		compatible = "gpio-keys";
137		pinctrl-0 = <&pmx_gpio_init>;
138		pinctrl-names = "default";
139		#address-cells = <1>;
140		#size-cells = <0>;
141
142		button {
143			label = "Init Button";
144			linux,code = <KEY_POWER>;
145			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
146		};
147	};
148};
149
150&nand {
151	chip-delay = <25>;
152	status = "okay";
153
154	partition@0 {
155		label = "uboot";
156		reg = <0x0 0x1c0000>;
157	};
158
159	partition@1c0000 {
160		label = "env";
161		reg = <0x1c0000 0x2c0000>;
162	};
163
164	partition@480000 {
165		label = "test";
166		reg = <0x480000 0x160000>;
167	};
168
169	partition@5e0000 {
170		label = "conf";
171		reg = <0x5e0000 0x540000>;
172	};
173
174	partition@b20000 {
175		label = "linux";
176		reg = <0xb20000 0x3d40000>;
177	};
178
179	partition@4860000 {
180		label = "user";
181		reg = <0x4860000 0xb7a0000>;
182	};
183};
184
185&mdio {
186	status = "okay";
187
188	ethphy0: ethernet-phy@0 {
189		reg = <0>;
190	};
191
192	ethphy1: ethernet-phy@1 {
193		reg = <1>;
194	};
195};
196
197&eth0 {
198	status = "okay";
199	ethernet0-port@0 {
200		phy-handle = <&ethphy0>;
201	};
202};
203
204&eth1 {
205	status = "okay";
206	ethernet1-port@0 {
207		phy-handle = <&ethphy1>;
208	};
209};
210