1// SPDX-License-Identifier: GPL-2.0 2/dts-v1/; 3 4#include "kirkwood.dtsi" 5#include "kirkwood-6281.dtsi" 6 7/ { 8 model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; 9 compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; 10 11 memory { 12 device_type = "memory"; 13 reg = <0x00000000 0x10000000>; 14 }; 15 16 chosen { 17 bootargs = "console=ttyS0,115200n8 earlyprintk"; 18 stdout-path = &uart0; 19 }; 20 21 ocp@f1000000 { 22 pinctrl: pin-controller@10000 { 23 pmx_led_os_red: pmx-led-os-red { 24 marvell,pins = "mpp22"; 25 marvell,function = "gpio"; 26 }; 27 pmx_power_off: pmx-power-off { 28 marvell,pins = "mpp24"; 29 marvell,function = "gpio"; 30 }; 31 pmx_led_os_green: pmx-led-os-green { 32 marvell,pins = "mpp25"; 33 marvell,function = "gpio"; 34 }; 35 pmx_led_usb_transfer: pmx-led-usb-transfer { 36 marvell,pins = "mpp27"; 37 marvell,function = "gpio"; 38 }; 39 pmx_button_reset: pmx-button-reset { 40 marvell,pins = "mpp28"; 41 marvell,function = "gpio"; 42 }; 43 pmx_button_usb_copy: pmx-button-usb-copy { 44 marvell,pins = "mpp29"; 45 marvell,function = "gpio"; 46 }; 47 }; 48 49 serial@12000 { 50 status = "okay"; 51 }; 52 53 sata@80000 { 54 status = "okay"; 55 nr-ports = <2>; 56 }; 57 }; 58 59 gpio_keys { 60 compatible = "gpio-keys"; 61 #address-cells = <1>; 62 #size-cells = <0>; 63 pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; 64 pinctrl-names = "default"; 65 66 copy { 67 label = "USB Copy"; 68 linux,code = <KEY_COPY>; 69 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; 70 }; 71 reset { 72 label = "Reset"; 73 linux,code = <KEY_RESTART>; 74 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; 75 }; 76 }; 77 78 gpio-leds { 79 compatible = "gpio-leds"; 80 pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green 81 &pmx_led_usb_transfer>; 82 pinctrl-names = "default"; 83 84 green-os { 85 label = "ib62x0:green:os"; 86 gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; 87 default-state = "keep"; 88 }; 89 red-os { 90 label = "ib62x0:red:os"; 91 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; 92 }; 93 usb-copy { 94 label = "ib62x0:red:usb_copy"; 95 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; 96 }; 97 }; 98 99 gpio_poweroff { 100 compatible = "gpio-poweroff"; 101 pinctrl-0 = <&pmx_power_off>; 102 pinctrl-names = "default"; 103 gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; 104 }; 105}; 106 107&nand { 108 status = "okay"; 109 110 partition@0 { 111 label = "u-boot"; 112 reg = <0x0000000 0xe0000>; 113 }; 114 115 partition@e0000 { 116 label = "u-boot environment"; 117 reg = <0xe0000 0x20000>; 118 }; 119 120 partition@100000 { 121 label = "uImage"; 122 reg = <0x0100000 0x600000>; 123 }; 124 125 partition@700000 { 126 label = "root"; 127 reg = <0x0700000 0xf900000>; 128 }; 129 130}; 131 132&mdio { 133 status = "okay"; 134 135 ethphy0: ethernet-phy@8 { 136 reg = <8>; 137 }; 138}; 139 140ð0 { 141 status = "okay"; 142 143 ethernet0-port@0 { 144 phy-handle = <ðphy0>; 145 }; 146}; 147