1// SPDX-License-Identifier: GPL-2.0 2/ { 3 mbus@f1000000 { 4 pciec: pcie@82000000 { 5 compatible = "marvell,kirkwood-pcie"; 6 status = "disabled"; 7 device_type = "pci"; 8 9 #address-cells = <3>; 10 #size-cells = <2>; 11 12 bus-range = <0x00 0xff>; 13 14 ranges = 15 <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 16 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 17 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 18 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 19 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 20 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ 21 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; 22 23 pcie0: pcie@1,0 { 24 device_type = "pci"; 25 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; 26 reg = <0x0800 0 0 0 0>; 27 #address-cells = <3>; 28 #size-cells = <2>; 29 #interrupt-cells = <1>; 30 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 31 0x81000000 0 0 0x81000000 0x1 0 1 0>; 32 bus-range = <0x00 0xff>; 33 interrupt-names = "intx", "error"; 34 interrupts = <9>, <44>; 35 interrupt-map-mask = <0 0 0 7>; 36 interrupt-map = <0 0 0 1 &pcie0_intc 0>, 37 <0 0 0 2 &pcie0_intc 1>, 38 <0 0 0 3 &pcie0_intc 2>, 39 <0 0 0 4 &pcie0_intc 3>; 40 marvell,pcie-port = <0>; 41 marvell,pcie-lane = <0>; 42 clocks = <&gate_clk 2>; 43 status = "disabled"; 44 45 pcie0_intc: interrupt-controller { 46 interrupt-controller; 47 #interrupt-cells = <1>; 48 }; 49 }; 50 51 pcie1: pcie@2,0 { 52 device_type = "pci"; 53 assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; 54 reg = <0x1000 0 0 0 0>; 55 #address-cells = <3>; 56 #size-cells = <2>; 57 #interrupt-cells = <1>; 58 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 59 0x81000000 0 0 0x81000000 0x2 0 1 0>; 60 bus-range = <0x00 0xff>; 61 interrupt-names = "intx", "error"; 62 interrupts = <10>, <45>; 63 interrupt-map-mask = <0 0 0 7>; 64 interrupt-map = <0 0 0 1 &pcie1_intc 0>, 65 <0 0 0 2 &pcie1_intc 1>, 66 <0 0 0 3 &pcie1_intc 2>, 67 <0 0 0 4 &pcie1_intc 3>; 68 marvell,pcie-port = <1>; 69 marvell,pcie-lane = <0>; 70 clocks = <&gate_clk 18>; 71 status = "disabled"; 72 73 pcie1_intc: interrupt-controller { 74 interrupt-controller; 75 #interrupt-cells = <1>; 76 }; 77 }; 78 }; 79 }; 80 ocp@f1000000 { 81 82 pinctrl: pin-controller@10000 { 83 compatible = "marvell,88f6282-pinctrl"; 84 85 pmx_sata0: pmx-sata0 { 86 marvell,pins = "mpp5", "mpp21", "mpp23"; 87 marvell,function = "sata0"; 88 }; 89 pmx_sata1: pmx-sata1 { 90 marvell,pins = "mpp4", "mpp20", "mpp22"; 91 marvell,function = "sata1"; 92 }; 93 94 /* 95 * Default I2C1 pinctrl setting on mpp36/mpp37, 96 * overwrite marvell,pins on board level if required. 97 */ 98 pmx_twsi1: pmx-twsi1 { 99 marvell,pins = "mpp36", "mpp37"; 100 marvell,function = "twsi1"; 101 }; 102 103 pmx_sdio: pmx-sdio { 104 marvell,pins = "mpp12", "mpp13", "mpp14", 105 "mpp15", "mpp16", "mpp17"; 106 marvell,function = "sdio"; 107 }; 108 }; 109 110 thermal: thermal@10078 { 111 compatible = "marvell,kirkwood-thermal"; 112 reg = <0x10078 0x4>; 113 status = "okay"; 114 }; 115 116 rtc: rtc@10300 { 117 compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; 118 reg = <0x10300 0x20>; 119 interrupts = <53>; 120 clocks = <&gate_clk 7>; 121 }; 122 123 i2c1: i2c@11100 { 124 compatible = "marvell,mv64xxx-i2c"; 125 reg = <0x11100 0x20>; 126 #address-cells = <1>; 127 #size-cells = <0>; 128 interrupts = <32>; 129 clock-frequency = <100000>; 130 clocks = <&gate_clk 7>; 131 pinctrl-0 = <&pmx_twsi1>; 132 pinctrl-names = "default"; 133 status = "disabled"; 134 }; 135 136 sata: sata@80000 { 137 compatible = "marvell,orion-sata"; 138 reg = <0x80000 0x5000>; 139 interrupts = <21>; 140 clocks = <&gate_clk 14>, <&gate_clk 15>; 141 clock-names = "0", "1"; 142 phys = <&sata_phy0>, <&sata_phy1>; 143 phy-names = "port0", "port1"; 144 status = "disabled"; 145 }; 146 147 sdio: mvsdio@90000 { 148 compatible = "marvell,orion-sdio"; 149 reg = <0x90000 0x200>; 150 interrupts = <28>; 151 clocks = <&gate_clk 4>; 152 pinctrl-0 = <&pmx_sdio>; 153 pinctrl-names = "default"; 154 bus-width = <4>; 155 cap-sdio-irq; 156 cap-sd-highspeed; 157 cap-mmc-highspeed; 158 status = "disabled"; 159 }; 160 }; 161}; 162