1// SPDX-License-Identifier: GPL-2.0 2/dts-v1/; 3 4#include "dove.dtsi" 5 6/ { 7 model = "Globalscale D3Plug"; 8 compatible = "globalscale,d3plug", "marvell,dove"; 9 10 memory { 11 device_type = "memory"; 12 reg = <0x00000000 0x40000000>; 13 }; 14 15 chosen { 16 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; 17 }; 18 19 leds { 20 compatible = "gpio-leds"; 21 pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; 22 pinctrl-names = "default"; 23 24 led-wlan-act { 25 label = "wlan-act"; 26 gpios = <&gpio0 0 1>; 27 }; 28 29 led-wlan-ap { 30 label = "wlan-ap"; 31 gpios = <&gpio0 1 1>; 32 }; 33 34 led-status { 35 label = "status"; 36 gpios = <&gpio0 2 1>; 37 }; 38 }; 39 40 regulators { 41 compatible = "simple-bus"; 42 #address-cells = <1>; 43 #size-cells = <0>; 44 45 usb_power: regulator@1 { 46 compatible = "regulator-fixed"; 47 reg = <1>; 48 regulator-name = "USB Power"; 49 regulator-min-microvolt = <5000000>; 50 regulator-max-microvolt = <5000000>; 51 enable-active-high; 52 regulator-always-on; 53 regulator-boot-on; 54 gpio = <&gpio0 8 0>; 55 pinctrl-0 = <&pmx_gpio_8>; 56 pinctrl-names = "default"; 57 }; 58 }; 59}; 60 61&uart0 { status = "okay"; }; 62&sata0 { status = "okay"; }; 63&i2c0 { status = "okay"; }; 64 65/* Samsung M8G2F eMMC */ 66&sdio0 { 67 status = "okay"; 68 non-removable; 69 bus-width = <4>; 70}; 71 72/* Marvell SD8787 WLAN/BT */ 73&sdio1 { 74 status = "okay"; 75 non-removable; 76}; 77 78&spi0 { 79 status = "okay"; 80 81 /* spi0.0: 2M Flash Macronix MX25L1605D */ 82 flash@0 { 83 compatible = "st,m25l1605d"; 84 spi-max-frequency = <86000000>; 85 reg = <0>; 86 }; 87}; 88 89&pcie { 90 status = "okay"; 91 /* Fresco Logic USB3.0 xHCI controller */ 92 pcie@1 { 93 status = "okay"; 94 reset-gpios = <&gpio0 26 1>; 95 reset-delay-us = <20000>; 96 pinctrl-0 = <&pmx_camera_gpio>; 97 pinctrl-names = "default"; 98 }; 99 /* Mini-PCIe slot */ 100 pcie@2 { 101 status = "okay"; 102 reset-gpios = <&gpio0 25 1>; 103 }; 104}; 105