1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B 4 */ 5 6/dts-v1/; 7 8#include "gemini.dtsi" 9#include <dt-bindings/input/input.h> 10 11/ { 12 model = "Raidsonic NAS IB-4220-B"; 13 compatible = "raidsonic,ib-4220-b", "cortina,gemini"; 14 #address-cells = <1>; 15 #size-cells = <1>; 16 17 memory@0 { /* 128 MB */ 18 device_type = "memory"; 19 reg = <0x00000000 0x8000000>; 20 }; 21 22 chosen { 23 bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; 24 stdout-path = &uart0; 25 }; 26 27 gpio_keys { 28 compatible = "gpio-keys"; 29 30 button-setup { 31 debounce-interval = <100>; 32 wakeup-source; 33 linux,code = <KEY_SETUP>; 34 label = "Backup button"; 35 /* Conflict with TVC */ 36 gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; 37 }; 38 button-restart { 39 debounce-interval = <100>; 40 wakeup-source; 41 linux,code = <KEY_RESTART>; 42 label = "Softreset button"; 43 /* Conflict with TVC */ 44 gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; 45 }; 46 }; 47 48 leds { 49 compatible = "gpio-leds"; 50 led-orange-hdd { 51 label = "nas4220b:orange:hdd"; 52 /* Conflict with TVC */ 53 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; 54 default-state = "on"; 55 }; 56 led-green-os { 57 label = "nas4220b:green:os"; 58 /* Conflict with TVC */ 59 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; 60 default-state = "on"; 61 linux,default-trigger = "heartbeat"; 62 }; 63 }; 64 65 mdio0: mdio { 66 compatible = "virtual,mdio-gpio"; 67 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ 68 <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ 69 #address-cells = <1>; 70 #size-cells = <0>; 71 72 phy0: ethernet-phy@1 { 73 reg = <1>; 74 device_type = "ethernet-phy"; 75 }; 76 }; 77 78 soc { 79 flash@30000000 { 80 status = "okay"; 81 /* 16MB of flash */ 82 reg = <0x30000000 0x01000000>; 83 84 partitions { 85 compatible = "redboot-fis"; 86 /* Eraseblock at 0xfe0000 */ 87 fis-index-block = <0x7f>; 88 }; 89 }; 90 91 syscon: syscon@40000000 { 92 pinctrl { 93 /* 94 * gpio1dgrp cover line 28-31 otherwise used 95 * by TVC. 96 */ 97 gpio1_default_pins: pinctrl-gpio1 { 98 mux { 99 function = "gpio1"; 100 groups = "gpio1dgrp"; 101 }; 102 }; 103 pinctrl-gmii { 104 mux { 105 function = "gmii"; 106 groups = "gmii_gmac0_grp"; 107 }; 108 /* Settings come from OpenWRT, pins on SL3516 */ 109 conf0 { 110 pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV"; 111 skew-delay = <0>; 112 }; 113 conf1 { 114 pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC"; 115 skew-delay = <15>; 116 }; 117 conf2 { 118 pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN"; 119 skew-delay = <7>; 120 }; 121 conf3 { 122 pins = "U8 GMAC0 TXC"; 123 skew-delay = <11>; 124 }; 125 conf4 { 126 pins = "V11 GMAC1 TXC"; 127 skew-delay = <10>; 128 }; 129 conf5 { 130 /* The data lines all have default skew */ 131 pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", 132 "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", 133 "T7 GMAC0 TXD0", "U6 GMAC0 TXD1", 134 "V7 GMAC0 TXD2", "U7 GMAC0 TXD3", 135 "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1", 136 "T11 GMAC1 RXD2", "W12 GMAC1 RXD3", 137 "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1", 138 "W10 GMAC1 TXD2", "T9 GMAC1 TXD3"; 139 skew-delay = <7>; 140 }; 141 /* Set up drive strength on GMAC0 to 16 mA */ 142 conf6 { 143 groups = "gmii_gmac0_grp"; 144 drive-strength = <16>; 145 }; 146 }; 147 }; 148 }; 149 150 sata: sata@46000000 { 151 cortina,gemini-ata-muxmode = <0>; 152 cortina,gemini-enable-sata-bridge; 153 status = "okay"; 154 }; 155 156 gpio1: gpio@4e000000 { 157 pinctrl-names = "default"; 158 pinctrl-0 = <&gpio1_default_pins>; 159 }; 160 161 ethernet@60000000 { 162 status = "okay"; 163 164 ethernet-port@0 { 165 phy-mode = "rgmii"; 166 phy-handle = <&phy0>; 167 }; 168 ethernet-port@1 { 169 /* Not used in this platform */ 170 }; 171 }; 172 173 ide@63000000 { 174 status = "okay"; 175 }; 176 177 ide@63400000 { 178 status = "okay"; 179 }; 180 181 usb@68000000 { 182 status = "okay"; 183 }; 184 185 usb@69000000 { 186 status = "okay"; 187 }; 188 }; 189}; 190