1/* 2 * BSD LICENSE 3 * 4 * Copyright(c) 2016 Broadcom. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * * Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the 15 * distribution. 16 * * Neither the name of Broadcom Corporation nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33/dts-v1/; 34 35#include "bcm-nsp.dtsi" 36#include <dt-bindings/gpio/gpio.h> 37 38/ { 39 model = "NorthStar Plus SVK (BCM958623HR)"; 40 compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp"; 41 42 chosen { 43 stdout-path = "serial0:115200n8"; 44 }; 45 46 memory@60000000 { 47 device_type = "memory"; 48 reg = <0x60000000 0x80000000>; 49 }; 50 51 gpio-restart { 52 compatible = "gpio-restart"; 53 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; 54 open-source; 55 priority = <200>; 56 }; 57}; 58 59/* USB 3 and SLIC support needed to be complete */ 60 61&dma { 62 status = "okay"; 63}; 64 65&amac0 { 66 status = "okay"; 67}; 68 69&amac1 { 70 status = "okay"; 71}; 72 73&amac2 { 74 status = "okay"; 75}; 76 77&ehci0 { 78 status = "okay"; 79}; 80 81&nand_controller { 82 nand@0 { 83 compatible = "brcm,nandcs"; 84 reg = <0>; 85 nand-on-flash-bbt; 86 87 #address-cells = <1>; 88 #size-cells = <1>; 89 90 nand-ecc-strength = <24>; 91 nand-ecc-step-size = <1024>; 92 93 brcm,nand-oob-sector-size = <27>; 94 95 partition@0 { 96 label = "nboot"; 97 reg = <0x00000000 0x00200000>; 98 read-only; 99 }; 100 partition@200000 { 101 label = "nenv"; 102 reg = <0x00200000 0x00400000>; 103 }; 104 partition@600000 { 105 label = "nsystem"; 106 reg = <0x00600000 0x00a00000>; 107 }; 108 partition@1000000 { 109 label = "nrootfs"; 110 reg = <0x01000000 0x03000000>; 111 }; 112 partition@4000000 { 113 label = "ncustfs"; 114 reg = <0x04000000 0x3c000000>; 115 }; 116 }; 117}; 118 119&ohci0 { 120 status = "okay"; 121}; 122 123&pcie0 { 124 status = "okay"; 125}; 126 127&pcie1 { 128 status = "okay"; 129}; 130 131&pinctrl { 132 pinctrl-names = "default"; 133 pinctrl-0 = <&nand_sel>; 134 nand_sel: nand_sel { 135 function = "nand"; 136 groups = "nand_grp"; 137 }; 138}; 139 140&sata_phy0 { 141 status = "okay"; 142}; 143 144&qspi { 145 status = "okay"; 146 bspi-sel = <0>; 147 flash: flash@0 { 148 #address-cells = <1>; 149 #size-cells = <1>; 150 compatible = "m25p80"; 151 reg = <0x0>; 152 spi-max-frequency = <12500000>; 153 m25p,fast-read; 154 spi-cpol; 155 spi-cpha; 156 157 partition@0 { 158 label = "boot"; 159 reg = <0x00000000 0x000a0000>; 160 }; 161 162 partition@a0000 { 163 label = "env"; 164 reg = <0x000a0000 0x00060000>; 165 }; 166 167 partition@100000 { 168 label = "system"; 169 reg = <0x00100000 0x00600000>; 170 }; 171 172 partition@700000 { 173 label = "rootfs"; 174 reg = <0x00700000 0x01900000>; 175 }; 176 }; 177}; 178 179&srab { 180 compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; 181 status = "okay"; 182 183 ports { 184 port@0 { 185 label = "port0"; 186 reg = <0>; 187 }; 188 189 port@1 { 190 label = "port1"; 191 reg = <1>; 192 }; 193 194 port@2 { 195 label = "port2"; 196 reg = <2>; 197 }; 198 199 port@3 { 200 label = "port3"; 201 reg = <3>; 202 }; 203 204 port@4 { 205 label = "port4"; 206 reg = <4>; 207 }; 208 209 port@8 { 210 ethernet = <&amac2>; 211 label = "cpu"; 212 reg = <8>; 213 fixed-link { 214 speed = <1000>; 215 full-duplex; 216 }; 217 }; 218 }; 219}; 220 221&uart0 { 222 status = "okay"; 223}; 224 225&usb3_phy { 226 status = "okay"; 227}; 228 229&xhci { 230 status = "okay"; 231}; 232