1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Broadcom BCM470X / BCM5301X ARM platform code. 4 * DTS for Meraki MR32 / Codename: Espresso 5 * 6 * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com> 7 */ 8 9/dts-v1/; 10 11#include "bcm4708.dtsi" 12#include "bcm5301x-nand-cs0-bch8.dtsi" 13#include <dt-bindings/leds/common.h> 14 15/ { 16 compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708"; 17 model = "Meraki MR32"; 18 19 chosen { 20 bootargs = " console=ttyS0,115200n8 earlycon"; 21 }; 22 23 memory@0 { 24 reg = <0x00000000 0x08000000>; 25 device_type = "memory"; 26 }; 27 28 aliases { 29 serial1 = &uart2; 30 }; 31 32 leds { 33 compatible = "gpio-leds"; 34 35 sysled3 { 36 function = LED_FUNCTION_FAULT; 37 color = <LED_COLOR_ID_AMBER>; 38 gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; 39 panic-indicator; 40 }; 41 sysled2 { 42 function = LED_FUNCTION_INDICATOR; 43 color = <LED_COLOR_ID_WHITE>; 44 gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; 45 }; 46 }; 47 48 keys { 49 compatible = "gpio-keys"; 50 51 button-restart { 52 label = "Reset"; 53 linux,code = <KEY_RESTART>; 54 gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; 55 }; 56 }; 57 58 pwm-leds { 59 compatible = "pwm-leds"; 60 61 led-0 { 62 /* SYS-LED 1 - Tricolor */ 63 function = LED_FUNCTION_INDICATOR; 64 color = <LED_COLOR_ID_RED>; 65 pwms = <&pwm 0 50000 0>; 66 max-brightness = <255>; 67 }; 68 69 led-1 { 70 /* SYS-LED 1 - Tricolor */ 71 function = LED_FUNCTION_POWER; 72 color = <LED_COLOR_ID_GREEN>; 73 pwms = <&pwm 1 50000 0>; 74 max-brightness = <255>; 75 }; 76 77 led-2 { 78 /* SYS-LED 1 - Tricolor */ 79 function = LED_FUNCTION_INDICATOR; 80 color = <LED_COLOR_ID_BLUE>; 81 pwms = <&pwm 2 50000 0>; 82 max-brightness = <255>; 83 }; 84 }; 85}; 86 87&uart0 { 88 clock-frequency = <62500000>; 89 /delete-property/ clocks; 90}; 91 92&uart1 { 93 status = "disabled"; 94}; 95 96&uart2 { 97 status = "okay"; 98 /* 99 * bluetooth-le { 100 * compatible = "brcm,bcm20732"; 101 * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; 102 *}; 103 */ 104}; 105 106&gmac0 { 107 nvmem-cell-names = "mac-address"; 108 nvmem-cells = <&mac_address>; 109}; 110 111&gmac1 { 112 status = "disabled"; 113}; 114&gmac2 { 115 status = "disabled"; 116}; 117&gmac3 { 118 status = "disabled"; 119}; 120 121&pwm { 122 status = "okay"; 123 pinctrl-names = "default"; 124 pinctrl-0 = <&pinmux_pwm>; 125}; 126 127&nandcs { 128 partitions { 129 /* 130 * The partition autodetection does not work for this device. 131 * It will only detect the "nvram" partition with an incorrect size. 132 * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0 133 * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0": 134 * [ 1.733117] 0x000000400000-0x000008000000 : "nvram" 135 */ 136 137 compatible = "fixed-partitions"; 138 #address-cells = <0x1>; 139 #size-cells = <0x1>; 140 141 partition@0 { 142 label = "u-boot"; 143 reg = <0x0 0x100000>; 144 read-only; 145 }; 146 147 partition@100000 { 148 label = "bootkernel1"; 149 reg = <0x100000 0x300000>; 150 read-only; 151 }; 152 153 partition@400000 { 154 label = "nvram"; 155 reg = <0x400000 0x100000>; 156 read-only; 157 }; 158 159 partition@500000 { 160 label = "bootkernel2"; 161 reg = <0x500000 0x300000>; 162 read-only; 163 }; 164 165 partition@800000 { 166 label = "ubi"; 167 reg = <0x800000 0x7780000>; 168 }; 169 }; 170}; 171 172&srab { 173 status = "okay"; 174 175 ports { 176 port@0 { 177 label = "poe"; 178 }; 179 180 port@5 { 181 label = "cpu"; 182 183 fixed-link { 184 speed = <1000>; 185 full-duplex; 186 }; 187 }; 188 }; 189}; 190 191&i2c0 { 192 status = "okay"; 193 194 pinctrl-names = "default"; 195 pinctrl-0 = <&pinmux_i2c>; 196 197 clock-frequency = <100000>; 198 199 current_sense: ina219@45 { 200 compatible = "ti,ina219"; 201 reg = <0x45>; 202 shunt-resistor = <60000>; /* = 60 mOhms */ 203 }; 204 205 eeprom: eeprom@50 { 206 compatible = "atmel,24c64"; 207 reg = <0x50>; 208 pagesize = <32>; 209 read-only; 210 #address-cells = <1>; 211 #size-cells = <1>; 212 213 mac_address: mac-address@66 { 214 reg = <0x66 0x6>; 215 }; 216 }; 217}; 218