xref: /freebsd/sys/contrib/device-tree/src/arm/broadcom/bcm28155-ap.dts (revision f126890ac5386406dadf7c4cfa9566cbb56537c5)
1// SPDX-License-Identifier: GPL-2.0-only
2// Copyright (C) 2013 Broadcom Corporation
3
4/dts-v1/;
5
6#include <dt-bindings/gpio/gpio.h>
7
8#include "bcm11351.dtsi"
9
10/ {
11	model = "BCM28155 AP board";
12	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
13
14	memory@80000000 {
15		device_type = "memory";
16		reg = <0x80000000 0x40000000>; /* 1 GB */
17	};
18
19	serial@3e000000 {
20		status = "okay";
21	};
22
23	i2c@3e016000 {
24		clock-frequency = <400000>;
25		status = "okay";
26	};
27
28	i2c@3e017000 {
29		clock-frequency = <400000>;
30		status = "okay";
31	};
32
33	i2c@3e018000 {
34		clock-frequency = <400000>;
35		status = "okay";
36	};
37
38	i2c@3500d000 {
39		clock-frequency = <100000>;
40		status = "okay";
41
42		pmu: pmu@8 {
43			reg = <0x08>;
44		};
45	};
46
47	sdio2: mmc@3f190000 {
48		non-removable;
49		max-frequency = <48000000>;
50		vmmc-supply = <&camldo1_reg>;
51		vqmmc-supply = <&iosr1_reg>;
52		status = "okay";
53	};
54
55	sdio4: mmc@3f1b0000 {
56		max-frequency = <48000000>;
57		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
58		vmmc-supply = <&sdldo_reg>;
59		vqmmc-supply = <&sdxldo_reg>;
60		status = "okay";
61	};
62
63	pwm: pwm@3e01a000 {
64		status = "okay";
65	};
66
67	usbotg: usb@3f120000 {
68		vusb_d-supply = <&usbldo_reg>;
69		vusb_a-supply = <&iosr1_reg>;
70		status = "okay";
71	};
72
73	usbphy: usb-phy@3f130000 {
74		status = "okay";
75	};
76};
77
78#include "bcm59056.dtsi"
79
80&pmu {
81	compatible = "brcm,bcm59056";
82	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
83	regulators {
84		camldo1_reg: camldo1 {
85			regulator-min-microvolt = <3300000>;
86			regulator-max-microvolt = <3300000>;
87			regulator-always-on;
88		};
89
90		sdldo_reg: sdldo {
91			regulator-min-microvolt = <3000000>;
92			regulator-max-microvolt = <3000000>;
93		};
94
95		sdxldo_reg: sdxldo {
96			regulator-min-microvolt = <2700000>;
97			regulator-max-microvolt = <3300000>;
98		};
99
100		usbldo_reg: usbldo {
101			regulator-min-microvolt = <3300000>;
102			regulator-max-microvolt = <3300000>;
103			regulator-always-on;
104		};
105
106		iosr1_reg: iosr1 {
107			regulator-min-microvolt = <1800000>;
108			regulator-max-microvolt = <1800000>;
109			regulator-always-on;
110		};
111	};
112};
113