xref: /freebsd/sys/contrib/device-tree/src/arm/broadcom/bcm-ns.dtsi (revision 397e83df75e0fcd0d3fcb95ae4d794cb7600fc89)
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
4 */
5
6#include <dt-bindings/clock/bcm-nsp.h>
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9#include <dt-bindings/interrupt-controller/irq.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11
12/ {
13	interrupt-parent = <&gic>;
14	#address-cells = <1>;
15	#size-cells = <1>;
16
17	pmu {
18		compatible = "arm,cortex-a9-pmu";
19		interrupts =
20			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
21			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
22	};
23
24	chipcommon-a-bus@18000000 {
25		compatible = "simple-bus";
26		ranges = <0x00000000 0x18000000 0x00001000>;
27		#address-cells = <1>;
28		#size-cells = <1>;
29
30		uart0: serial@300 {
31			compatible = "ns16550";
32			reg = <0x0300 0x100>;
33			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
34			clocks = <&iprocslow>;
35			status = "disabled";
36		};
37
38		uart1: serial@400 {
39			compatible = "ns16550";
40			reg = <0x0400 0x100>;
41			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
42			clocks = <&iprocslow>;
43			pinctrl-names = "default";
44			pinctrl-0 = <&pinmux_uart1>;
45			status = "disabled";
46		};
47	};
48
49	mpcore-bus@19000000 {
50		compatible = "simple-bus";
51		ranges = <0x00000000 0x19000000 0x00023000>;
52		#address-cells = <1>;
53		#size-cells = <1>;
54
55		scu@20000 {
56			compatible = "arm,cortex-a9-scu";
57			reg = <0x20000 0x100>;
58		};
59
60		timer@20200 {
61			compatible = "arm,cortex-a9-global-timer";
62			reg = <0x20200 0x100>;
63			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
64			clocks = <&periph_clk>;
65		};
66
67		timer@20600 {
68			compatible = "arm,cortex-a9-twd-timer";
69			reg = <0x20600 0x20>;
70			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
71						  IRQ_TYPE_EDGE_RISING)>;
72			clocks = <&periph_clk>;
73		};
74
75		gic: interrupt-controller@21000 {
76			compatible = "arm,cortex-a9-gic";
77			#interrupt-cells = <3>;
78			#address-cells = <0>;
79			interrupt-controller;
80			reg = <0x21000 0x1000>,
81			      <0x20100 0x100>;
82		};
83
84		L2: cache-controller@22000 {
85			compatible = "arm,pl310-cache";
86			reg = <0x22000 0x1000>;
87			cache-unified;
88			arm,shared-override;
89			prefetch-data = <1>;
90			prefetch-instr = <1>;
91			cache-level = <2>;
92		};
93	};
94
95	axi@18000000 {
96		compatible = "brcm,bus-axi";
97		reg = <0x18000000 0x1000>;
98		ranges = <0x00000000 0x18000000 0x00100000>;
99		#address-cells = <1>;
100		#size-cells = <1>;
101
102		#interrupt-cells = <1>;
103		interrupt-map-mask = <0x000fffff 0xffff>;
104		interrupt-map =
105			/* ChipCommon */
106			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
107
108			/* Switch Register Access Block */
109			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
110			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
111			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
112			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
113			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
114			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
115			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
116			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
117			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
118			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
119			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
120			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
121			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
122
123			/* PCIe Controller 0 */
124			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
125			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
126			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
127			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
128			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
129			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
130
131			/* PCIe Controller 1 */
132			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
133			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
134			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
135			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
136			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
137			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
138
139			/* PCIe Controller 2 */
140			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
141			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
142			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
143			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
144			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
145			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
146
147			/* USB 2.0 Controller */
148			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
149
150			/* USB 3.0 Controller */
151			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
152
153			/* Ethernet Controller 0 */
154			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
155
156			/* Ethernet Controller 1 */
157			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
158
159			/* Ethernet Controller 2 */
160			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
161
162			/* Ethernet Controller 3 */
163			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
164
165			/* NAND Controller */
166			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
167			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
168			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
169			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
170			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
171			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
172			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
173			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
174
175		chipcommon: chipcommon@0 {
176			reg = <0x00000000 0x1000>;
177
178			gpio-controller;
179			#gpio-cells = <2>;
180			interrupt-controller;
181			#interrupt-cells = <2>;
182		};
183
184		pcie0: pcie@12000 {
185			reg = <0x00012000 0x1000>;
186
187			#address-cells = <3>;
188			#size-cells = <2>;
189		};
190
191		pcie1: pcie@13000 {
192			reg = <0x00013000 0x1000>;
193
194			#address-cells = <3>;
195			#size-cells = <2>;
196		};
197
198		pcie2: pcie@14000 {
199			reg = <0x00014000 0x1000>;
200
201			#address-cells = <3>;
202			#size-cells = <2>;
203		};
204
205		usb2: usb2@21000 {
206			reg = <0x00021000 0x1000>;
207
208			#address-cells = <1>;
209			#size-cells = <1>;
210			ranges;
211
212			interrupt-parent = <&gic>;
213
214			ehci: usb@21000 {
215				compatible = "generic-ehci";
216				reg = <0x00021000 0x1000>;
217				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
218				phys = <&usb2_phy>;
219
220				#address-cells = <1>;
221				#size-cells = <0>;
222
223				ehci_port1: port@1 {
224					reg = <1>;
225					#trigger-source-cells = <0>;
226				};
227
228				ehci_port2: port@2 {
229					reg = <2>;
230					#trigger-source-cells = <0>;
231				};
232			};
233
234			ohci: usb@22000 {
235				compatible = "generic-ohci";
236				reg = <0x00022000 0x1000>;
237				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
238
239				#address-cells = <1>;
240				#size-cells = <0>;
241
242				ohci_port1: port@1 {
243					reg = <1>;
244					#trigger-source-cells = <0>;
245				};
246
247				ohci_port2: port@2 {
248					reg = <2>;
249					#trigger-source-cells = <0>;
250				};
251			};
252		};
253
254		usb3: usb3@23000 {
255			reg = <0x00023000 0x1000>;
256
257			#address-cells = <1>;
258			#size-cells = <1>;
259			ranges;
260
261			interrupt-parent = <&gic>;
262
263			xhci: usb@23000 {
264				compatible = "generic-xhci";
265				reg = <0x00023000 0x1000>;
266				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
267				phys = <&usb3_phy>;
268				phy-names = "usb";
269
270				#address-cells = <1>;
271				#size-cells = <0>;
272
273				xhci_port1: port@1 {
274					reg = <1>;
275					#trigger-source-cells = <0>;
276				};
277			};
278		};
279
280		gmac0: ethernet@24000 {
281			reg = <0x24000 0x800>;
282			phy-mode = "internal";
283
284			fixed-link {
285				speed = <1000>;
286				full-duplex;
287			};
288		};
289
290		gmac1: ethernet@25000 {
291			reg = <0x25000 0x800>;
292			phy-mode = "internal";
293
294			fixed-link {
295				speed = <1000>;
296				full-duplex;
297			};
298		};
299
300		gmac2: ethernet@26000 {
301			reg = <0x26000 0x800>;
302			phy-mode = "internal";
303
304			fixed-link {
305				speed = <1000>;
306				full-duplex;
307			};
308		};
309
310		gmac3: ethernet@27000 {
311			reg = <0x27000 0x800>;
312		};
313	};
314
315	pwm: pwm@18002000 {
316		compatible = "brcm,iproc-pwm";
317		reg = <0x18002000 0x28>;
318		clocks = <&osc>;
319		#pwm-cells = <3>;
320		status = "disabled";
321	};
322
323	mdio: mdio@18003000 {
324		compatible = "brcm,iproc-mdio";
325		reg = <0x18003000 0x8>;
326		#size-cells = <0>;
327		#address-cells = <1>;
328	};
329
330	mdio-mux@18003000 {
331		compatible = "mdio-mux-mmioreg", "mdio-mux";
332		mdio-parent-bus = <&mdio>;
333		#address-cells = <1>;
334		#size-cells = <0>;
335		reg = <0x18003000 0x4>;
336		mux-mask = <0x200>;
337
338		mdio@0 {
339			reg = <0x0>;
340			#address-cells = <1>;
341			#size-cells = <0>;
342
343			usb3_phy: usb3-phy@10 {
344				compatible = "brcm,ns-ax-usb3-phy";
345				reg = <0x10>;
346				usb3-dmp-syscon = <&usb3_dmp>;
347				#phy-cells = <0>;
348				status = "disabled";
349			};
350		};
351	};
352
353	rng: rng@18004000 {
354		compatible = "brcm,bcm5301x-rng";
355		reg = <0x18004000 0x14>;
356	};
357
358	srab: ethernet-switch@18007000 {
359		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
360		reg = <0x18007000 0x1000>;
361
362		status = "disabled";
363
364		ports {
365			#address-cells = <1>;
366			#size-cells = <0>;
367
368			port@0 {
369				reg = <0>;
370			};
371
372			port@1 {
373				reg = <1>;
374			};
375
376			port@2 {
377				reg = <2>;
378			};
379
380			port@3 {
381				reg = <3>;
382			};
383
384			port@4 {
385				reg = <4>;
386			};
387
388			port@5 {
389				reg = <5>;
390				ethernet = <&gmac0>;
391			};
392
393			port@7 {
394				reg = <7>;
395				ethernet = <&gmac1>;
396			};
397
398			port@8 {
399				reg = <8>;
400				ethernet = <&gmac2>;
401
402				fixed-link {
403					speed = <1000>;
404					full-duplex;
405				};
406			};
407		};
408	};
409
410	uart2: serial@18008000 {
411		compatible = "ns16550a";
412		reg = <0x18008000 0x20>;
413		clocks = <&iprocslow>;
414		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
415		reg-shift = <2>;
416		status = "disabled";
417	};
418
419	dmu-bus@1800c000 {
420		compatible = "simple-bus";
421		ranges = <0 0x1800c000 0x1000>;
422		#address-cells = <1>;
423		#size-cells = <1>;
424
425		cru-bus@100 {
426			compatible = "brcm,ns-cru", "simple-mfd";
427			reg = <0x100 0x1a4>;
428			ranges;
429			#address-cells = <1>;
430			#size-cells = <1>;
431
432			usb2_phy: phy@164 {
433				compatible = "brcm,ns-usb2-phy";
434				reg = <0x164 0x4>;
435				brcm,syscon-clkset = <&cru_clkset>;
436				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
437				clock-names = "phy-ref-clk";
438				#phy-cells = <0>;
439			};
440
441			cru_clkset: syscon@180 {
442				compatible = "brcm,cru-clkset", "syscon";
443				reg = <0x180 0x4>;
444			};
445
446			pinctrl: pinctrl@1c0 {
447				compatible = "brcm,bcm4708-pinmux";
448				reg = <0x1c0 0x24>;
449				reg-names = "cru_gpio_control";
450
451				spi-pins {
452					groups = "spi_grp";
453					function = "spi";
454				};
455
456				pinmux_i2c: i2c-pins {
457					groups = "i2c_grp";
458					function = "i2c";
459				};
460
461				pinmux_pwm: pwm-pins {
462					groups = "pwm0_grp", "pwm1_grp",
463						 "pwm2_grp", "pwm3_grp";
464					function = "pwm";
465				};
466
467				pinmux_uart1: uart1-pins {
468					groups = "uart1_grp";
469					function = "uart1";
470				};
471			};
472
473			thermal: thermal@2c0 {
474				compatible = "brcm,ns-thermal";
475				reg = <0x2c0 0x10>;
476				#thermal-sensor-cells = <0>;
477			};
478		};
479	};
480
481	nand_controller: nand-controller@18028000 {
482		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
483		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
484		reg-names = "nand", "iproc-idm", "iproc-ext";
485		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
486
487		#address-cells = <1>;
488		#size-cells = <0>;
489
490		brcm,nand-has-wp;
491	};
492
493	usb3_dmp: syscon@18105000 {
494		reg = <0x18105000 0x1000>;
495	};
496
497	thermal-zones {
498		cpu_thermal: cpu-thermal {
499			polling-delay-passive = <0>;
500			polling-delay = <1000>;
501			coefficients = <(-556) 418000>;
502			thermal-sensors = <&thermal>;
503
504			trips {
505				cpu-crit {
506					temperature = <125000>;
507					hysteresis = <0>;
508					type = "critical";
509				};
510			};
511
512			cooling-maps {
513			};
514		};
515	};
516};
517