xref: /freebsd/sys/contrib/device-tree/src/arm/broadcom/bcm-cygnus-clock.dtsi (revision a0ca4af9455b844c5e094fc1b09b1390ffa979fc)
1/*
2 *  BSD LICENSE
3 *
4 *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
5 *
6 *  Redistribution and use in source and binary forms, with or without
7 *  modification, are permitted provided that the following conditions
8 *  are met:
9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom Corporation nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33clocks {
34	#address-cells = <1>;
35	#size-cells = <1>;
36	ranges;
37
38	osc: oscillator {
39		#clock-cells = <0>;
40		compatible = "fixed-clock";
41		clock-frequency = <25000000>;
42	};
43
44	/* Cygnus ARM PLL */
45	armpll: armpll@19000000 {
46		#clock-cells = <0>;
47		compatible = "brcm,cygnus-armpll";
48		clocks = <&osc>;
49		reg = <0x19000000 0x1000>;
50	};
51
52	/* peripheral clock for system timer */
53	periph_clk: arm_periph_clk {
54		#clock-cells = <0>;
55		compatible = "fixed-factor-clock";
56		clocks = <&armpll>;
57		clock-div = <2>;
58		clock-mult = <1>;
59	};
60
61	/* APB bus clock */
62	apb_clk: apb_clk {
63		#clock-cells = <0>;
64		compatible = "fixed-factor-clock";
65		clocks = <&armpll>;
66		clock-div = <4>;
67		clock-mult = <1>;
68	};
69
70	genpll: genpll@301d000 {
71		#clock-cells = <1>;
72		compatible = "brcm,cygnus-genpll";
73		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
74		clocks = <&osc>;
75		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
76				     "enet_sw", "audio_125", "can";
77	};
78
79	/* always 1/2 of the axi21 clock */
80	axi41_clk: axi41_clk {
81		#clock-cells = <0>;
82		compatible = "fixed-factor-clock";
83		clocks = <&genpll 1>;
84		clock-div = <2>;
85		clock-mult = <1>;
86	};
87
88	/* always 1/4 of the axi21 clock */
89	axi81_clk: axi81_clk {
90		#clock-cells = <0>;
91		compatible = "fixed-factor-clock";
92		clocks = <&genpll 1>;
93		clock-div = <4>;
94		clock-mult = <1>;
95	};
96
97	lcpll0: lcpll0@301d02c {
98		#clock-cells = <1>;
99		compatible = "brcm,cygnus-lcpll0";
100		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
101		clocks = <&osc>;
102		clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
103				     "usb_phy", "smart_card", "ch5";
104	};
105
106	mipipll: mipipll@180a9800 {
107		#clock-cells = <1>;
108		compatible = "brcm,cygnus-mipipll";
109		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
110		clocks = <&osc>;
111		clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
112				     "ch2_v3d", "ch3_unused", "ch4_unused",
113				     "ch5_unused";
114	};
115
116	asiu_clks: asiu_clks@301d048 {
117		#clock-cells = <1>;
118		compatible = "brcm,cygnus-asiu-clk";
119		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
120
121		clocks = <&osc>;
122		clock-output-names = "keypad", "adc/touch", "pwm";
123	};
124
125	audiopll: audiopll@180aeb00 {
126		#clock-cells = <1>;
127		compatible = "brcm,cygnus-audiopll";
128		reg = <0x180aeb00 0x68>;
129		clocks = <&osc>;
130		clock-output-names = "audiopll", "ch0_audio",
131					"ch1_audio", "ch2_audio";
132	};
133};
134