xref: /freebsd/sys/contrib/device-tree/src/arm/aspeed/aspeed-bmc-quanta-q71l.dts (revision 397e83df75e0fcd0d3fcb95ae4d794cb7600fc89) 
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3#include "aspeed-g4.dtsi"
4#include <dt-bindings/gpio/aspeed-gpio.h>
5
6/ {
7	model = "Quanta Q71L BMC";
8	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
9
10	aliases {
11		i2c14 = &i2c_pcie2;
12		i2c15 = &i2c_pcie3;
13		i2c16 = &i2c_pcie6;
14		i2c17 = &i2c_pcie7;
15		i2c18 = &i2c_pcie1;
16		i2c19 = &i2c_pcie4;
17		i2c20 = &i2c_pcie5;
18		i2c21 = &i2c_pcie8;
19		i2c22 = &i2c_pcie9;
20		i2c23 = &i2c_pcie10;
21		i2c24 = &i2c_ssd1;
22		i2c25 = &i2c_ssd2;
23		i2c26 = &i2c_psu4;
24		i2c27 = &i2c_psu1;
25		i2c28 = &i2c_psu3;
26		i2c29 = &i2c_psu2;
27	};
28
29	chosen {
30		stdout-path = &uart5;
31		bootargs = "console=ttyS4,115200 earlycon";
32	};
33
34	memory@40000000 {
35		reg = <0x40000000 0x8000000>;
36	};
37
38	reserved-memory {
39		#address-cells = <1>;
40		#size-cells = <1>;
41		ranges;
42
43		vga_memory: framebuffer@47800000 {
44			no-map;
45			reg = <0x47800000 0x00800000>; /* 8MB */
46		};
47	};
48
49	leds {
50		compatible = "gpio-leds";
51
52		heartbeat {
53			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
54		};
55
56		power {
57			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
58		};
59
60		identify {
61			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
62		};
63	};
64
65	iio-hwmon {
66		compatible = "iio-hwmon";
67		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
68			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
69			<&adc 8>, <&adc 9>, <&adc 10>;
70	};
71
72	iio-hwmon-battery {
73		compatible = "iio-hwmon";
74		io-channels = <&adc 11>;
75	};
76
77	i2c1mux: i2cmux {
78		compatible = "i2c-mux-gpio";
79		#address-cells = <1>;
80		#size-cells = <0>;
81
82		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
83		i2c-parent = <&i2c1>;
84	};
85};
86
87&fmc {
88	status = "okay";
89	flash@0 {
90		status = "okay";
91		label = "bmc";
92		m25p,fast-read;
93#include "openbmc-flash-layout.dtsi"
94	};
95};
96
97&spi {
98	status = "okay";
99	pinctrl-names = "default";
100	pinctrl-0 = <&pinctrl_spi1_default>;
101
102	flash@0 {
103		status = "okay";
104		m25p,fast-read;
105		label = "pnor";
106	};
107};
108
109&pinctrl {
110	pinctrl-names = "default";
111	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
112			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
113};
114
115&p2a {
116	status = "okay";
117	memory-region = <&vga_memory>;
118};
119
120&ibt {
121	status = "okay";
122};
123
124&lpc_ctrl {
125	status = "okay";
126};
127
128&lpc_snoop {
129	status = "okay";
130	snoop-ports = <0x80>;
131};
132
133&mac0 {
134	status = "okay";
135	pinctrl-names = "default";
136	pinctrl-0 = <&pinctrl_rmii1_default>;
137	use-ncsi;
138};
139
140&mac1 {
141	status = "okay";
142	pinctrl-names = "default";
143	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
144};
145
146&uart1 {
147	status = "okay";
148};
149
150&uart5 {
151	status = "okay";
152};
153
154&i2c0 {
155	status = "okay";
156};
157
158&i2c1 {
159	status = "okay";
160
161	/* temp2 inlet */
162	tmp75@4c {
163		compatible = "ti,tmp75";
164		reg = <0x4c>;
165	};
166
167	/* temp3 */
168	tmp75@4e {
169		compatible = "ti,tmp75";
170		reg = <0x4e>;
171	};
172
173	/* temp1 */
174	tmp75@4f {
175		compatible = "ti,tmp75";
176		reg = <0x4f>;
177	};
178
179	/* Baseboard FRU */
180	eeprom@54 {
181		compatible = "atmel,24c64";
182		reg = <0x54>;
183	};
184
185	/* FP FRU */
186	eeprom@57 {
187		compatible = "atmel,24c64";
188		reg = <0x57>;
189	};
190};
191
192&i2c2 {
193	status = "okay";
194
195	/* 0: PCIe Slot 2,
196	 *    Slot 3,
197	 *    Slot 6,
198	 *    Slot 7
199	 */
200	i2c-mux@74 {
201		compatible = "nxp,pca9546";
202		reg = <0x74>;
203		#address-cells = <1>;
204		#size-cells = <0>;
205		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
206
207		i2c_pcie2: i2c@0 {
208			#address-cells = <1>;
209			#size-cells = <0>;
210			reg = <0>;
211		};
212
213		i2c_pcie3: i2c@1 {
214			#address-cells = <1>;
215			#size-cells = <0>;
216			reg = <1>;
217		};
218
219		i2c_pcie6: i2c@2 {
220			#address-cells = <1>;
221			#size-cells = <0>;
222			reg = <2>;
223		};
224
225		i2c_pcie7: i2c@3 {
226			#address-cells = <1>;
227			#size-cells = <0>;
228			reg = <3>;
229		};
230	};
231
232	/* 0: PCIe Slot 1,
233	 *    Slot 4,
234	 *    Slot 5,
235	 *    Slot 8,
236	 *    Slot 9,
237	 *    Slot 10,
238	 *    SSD 1,
239	 *    SSD 2
240	 */
241	i2c-mux@77 {
242		compatible = "nxp,pca9548";
243		#address-cells = <1>;
244		#size-cells = <0>;
245		reg = <0x77>;
246		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
247
248		i2c_pcie1: i2c@0 {
249			#address-cells = <1>;
250			#size-cells = <0>;
251			reg = <0>;
252		};
253
254		i2c_pcie4: i2c@1 {
255			#address-cells = <1>;
256			#size-cells = <0>;
257			reg = <1>;
258		};
259
260		i2c_pcie5: i2c@2 {
261			#address-cells = <1>;
262			#size-cells = <0>;
263			reg = <2>;
264		};
265
266		i2c_pcie8: i2c@3 {
267			#address-cells = <1>;
268			#size-cells = <0>;
269			reg = <3>;
270		};
271
272		i2c_pcie9: i2c@4 {
273			#address-cells = <1>;
274			#size-cells = <0>;
275			reg = <4>;
276		};
277
278		i2c_pcie10: i2c@5 {
279			#address-cells = <1>;
280			#size-cells = <0>;
281			reg = <5>;
282		};
283
284		i2c_ssd1: i2c@6 {
285			#address-cells = <1>;
286			#size-cells = <0>;
287			reg = <6>;
288		};
289
290		i2c_ssd2: i2c@7 {
291			#address-cells = <1>;
292			#size-cells = <0>;
293			reg = <7>;
294		};
295	};
296};
297
298&i2c3 {
299	status = "okay";
300
301	/* BIOS FRU */
302	eeprom@56 {
303		compatible = "atmel,24c64";
304		reg = <0x56>;
305	};
306};
307
308&i2c4 {
309	status = "okay";
310};
311
312&i2c5 {
313	status = "okay";
314};
315
316&i2c6 {
317	status = "okay";
318};
319
320&i2c7 {
321	status = "okay";
322
323	/* 0: PSU4
324	 *    PSU1
325	 *    PSU3
326	 *    PSU2
327	 */
328	i2c-mux@70 {
329		compatible = "nxp,pca9546";
330		reg = <0x70>;
331		#address-cells = <1>;
332		#size-cells = <0>;
333
334		i2c_psu4: i2c@0 {
335			#address-cells = <1>;
336			#size-cells = <0>;
337			reg = <0>;
338
339			psu@59 {
340				compatible = "pmbus";
341				reg = <0x59>;
342			};
343		};
344
345		i2c_psu1: i2c@1 {
346			#address-cells = <1>;
347			#size-cells = <0>;
348			reg = <1>;
349
350			psu@58 {
351				compatible = "pmbus";
352				reg = <0x58>;
353			};
354		};
355
356		i2c_psu3: i2c@2 {
357			#address-cells = <1>;
358			#size-cells = <0>;
359			reg = <2>;
360
361			psu@58 {
362				compatible = "pmbus";
363				reg = <0x58>;
364			};
365		};
366
367		i2c_psu2: i2c@3 {
368			#address-cells = <1>;
369			#size-cells = <0>;
370			reg = <3>;
371
372			psu@59 {
373				compatible = "pmbus";
374				reg = <0x59>;
375			};
376		};
377	};
378
379	/* PDB FRU */
380	eeprom@52 {
381		compatible = "atmel,24c64";
382		reg = <0x52>;
383	};
384};
385
386&i2c8 {
387	status = "okay";
388
389	/* BMC FRU */
390	eeprom@50 {
391		compatible = "atmel,24c64";
392		reg = <0x50>;
393	};
394};
395
396&vuart {
397	status = "okay";
398};
399
400&wdt2 {
401	status = "okay";
402};
403
404&adc {
405	status = "okay";
406};
407
408&pwm_tacho {
409	status = "okay";
410
411	pinctrl-names = "default";
412	pinctrl-0 = <&pinctrl_pwm0_default
413		&pinctrl_pwm1_default
414		&pinctrl_pwm2_default
415		&pinctrl_pwm3_default>;
416
417	fan@0 {
418		reg = <0x00>;
419		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
420	};
421
422	fan@1 {
423		reg = <0x01>;
424		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
425	};
426
427	fan@2 {
428		reg = <0x02>;
429		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
430	};
431
432	fan@3 {
433		reg = <0x03>;
434		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
435	};
436
437	fan@4 {
438		reg = <0x00>;
439		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
440	};
441
442	fan@5 {
443		reg = <0x01>;
444		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
445	};
446
447	fan@6 {
448		reg = <0x02>;
449		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
450	};
451
452	fan@7 {
453		reg = <0x03>;
454		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
455	};
456};
457
458&i2c1mux {
459	i2c@0 {
460		reg = <0>;
461		#address-cells = <1>;
462		#size-cells = <0>;
463
464		/* Memory Riser 1 FRU */
465		eeprom@50 {
466			compatible = "atmel,24c02";
467			reg = <0x50>;
468		};
469
470		/* Memory Riser 2 FRU */
471		eeprom@51 {
472			compatible = "atmel,24c02";
473			reg = <0x51>;
474		};
475
476		/* Memory Riser 3 FRU */
477		eeprom@52 {
478			compatible = "atmel,24c02";
479			reg = <0x52>;
480		};
481
482		/* Memory Riser 4 FRU */
483		eeprom@53 {
484			compatible = "atmel,24c02";
485			reg = <0x53>;
486		};
487	};
488
489	i2c@1 {
490		reg = <1>;
491		#address-cells = <1>;
492		#size-cells = <0>;
493
494		/* Memory Riser 5 FRU */
495		eeprom@50 {
496			compatible = "atmel,24c02";
497			reg = <0x50>;
498		};
499
500		/* Memory Riser 6 FRU */
501		eeprom@51 {
502			compatible = "atmel,24c02";
503			reg = <0x51>;
504		};
505
506		/* Memory Riser 7 FRU */
507		eeprom@52 {
508			compatible = "atmel,24c02";
509			reg = <0x52>;
510		};
511
512		/* Memory Riser 8 FRU */
513		eeprom@53 {
514			compatible = "atmel,24c02";
515			reg = <0x53>;
516		};
517	};
518};
519