1// SPDX-License-Identifier: GPL-2.0 OR MIT 2/* 3 * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com> 4 */ 5 6/dts-v1/; 7#include <dt-bindings/gpio/gpio.h> 8#include "meson8.dtsi" 9 10/ { 11 model = "MINIX NEO-X8"; 12 compatible = "minix,neo-x8", "amlogic,meson8"; 13 14 aliases { 15 serial0 = &uart_AO; 16 }; 17 18 chosen { 19 stdout-path = "serial0:115200n8"; 20 }; 21 22 memory { 23 device_type = "memory"; 24 reg = <0x40000000 0x80000000>; 25 }; 26 27 gpio-leds { 28 compatible = "gpio-leds"; 29 30 led-blue { 31 label = "x8:blue:power"; 32 gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>; 33 }; 34 }; 35}; 36 37&uart_AO { 38 status = "okay"; 39 pinctrl-0 = <&uart_ao_a_pins>; 40 pinctrl-names = "default"; 41}; 42 43&i2c_AO { 44 status = "okay"; 45 pinctrl-0 = <&i2c_ao_pins>; 46 pinctrl-names = "default"; 47 48 pmic@32 { 49 compatible = "ricoh,rn5t618"; 50 reg = <0x32>; 51 system-power-controller; 52 53 regulators { 54 }; 55 }; 56 57 rtc@51 { 58 compatible = "nxp,pcf8563"; 59 reg = <0x51>; 60 }; 61}; 62 63&spifc { 64 status = "okay"; 65 pinctrl-0 = <&spi_nor_pins>; 66 pinctrl-names = "default"; 67 68 flash@0 { 69 compatible = "mxicy,mx25l1606e"; 70 #address-cells = <1>; 71 #size-cells = <1>; 72 reg = <0>; 73 spi-max-frequency = <30000000>; 74 75 partition@0 { 76 label = "boot"; 77 reg = <0x0 0x100000>; 78 }; 79 80 partition@100000 { 81 label = "env"; 82 reg = <0x100000 0x10000>; 83 }; 84 }; 85}; 86 87&ir_receiver { 88 status = "okay"; 89 pinctrl-0 = <&ir_recv_pins>; 90 pinctrl-names = "default"; 91}; 92 93ðmac { 94 status = "okay"; 95 pinctrl-0 = <ð_pins>; 96 pnictrl-names = "default"; 97}; 98