xref: /freebsd/sys/contrib/device-tree/src/arm/allwinner/suniv-f1c100s.dtsi (revision f126890ac5386406dadf7c4cfa9566cbb56537c5)
1// SPDX-License-Identifier: (GPL-2.0+ OR X11)
2/*
3 * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
4 * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
5 */
6
7#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
8#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
9
10/ {
11	#address-cells = <1>;
12	#size-cells = <1>;
13	interrupt-parent = <&intc>;
14
15	clocks {
16		osc24M: clk-24M {
17			#clock-cells = <0>;
18			compatible = "fixed-clock";
19			clock-frequency = <24000000>;
20			clock-output-names = "osc24M";
21		};
22
23		osc32k: clk-32k {
24			#clock-cells = <0>;
25			compatible = "fixed-clock";
26			clock-frequency = <32768>;
27			clock-output-names = "osc32k";
28		};
29	};
30
31	cpus {
32		#address-cells = <1>;
33		#size-cells = <0>;
34
35		cpu@0 {
36			compatible = "arm,arm926ej-s";
37			device_type = "cpu";
38			reg = <0x0>;
39		};
40	};
41
42	soc {
43		compatible = "simple-bus";
44		#address-cells = <1>;
45		#size-cells = <1>;
46		ranges;
47
48		sram-controller@1c00000 {
49			compatible = "allwinner,suniv-f1c100s-system-control",
50				     "allwinner,sun4i-a10-system-control";
51			reg = <0x01c00000 0x30>;
52			#address-cells = <1>;
53			#size-cells = <1>;
54			ranges;
55
56			sram_d: sram@10000 {
57				compatible = "mmio-sram";
58				reg = <0x00010000 0x1000>;
59				#address-cells = <1>;
60				#size-cells = <1>;
61				ranges = <0 0x00010000 0x1000>;
62
63				otg_sram: sram-section@0 {
64					compatible = "allwinner,suniv-f1c100s-sram-d",
65						     "allwinner,sun4i-a10-sram-d";
66					reg = <0x0000 0x1000>;
67					status = "disabled";
68				};
69			};
70		};
71
72		spi0: spi@1c05000 {
73			compatible = "allwinner,suniv-f1c100s-spi",
74				     "allwinner,sun8i-h3-spi";
75			reg = <0x01c05000 0x1000>;
76			interrupts = <10>;
77			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
78			clock-names = "ahb", "mod";
79			resets = <&ccu RST_BUS_SPI0>;
80			status = "disabled";
81			num-cs = <1>;
82			#address-cells = <1>;
83			#size-cells = <0>;
84		};
85
86		spi1: spi@1c06000 {
87			compatible = "allwinner,suniv-f1c100s-spi",
88				     "allwinner,sun8i-h3-spi";
89			reg = <0x01c06000 0x1000>;
90			interrupts = <11>;
91			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
92			clock-names = "ahb", "mod";
93			resets = <&ccu RST_BUS_SPI1>;
94			status = "disabled";
95			num-cs = <1>;
96			#address-cells = <1>;
97			#size-cells = <0>;
98		};
99
100		mmc0: mmc@1c0f000 {
101			compatible = "allwinner,suniv-f1c100s-mmc",
102				     "allwinner,sun7i-a20-mmc";
103			reg = <0x01c0f000 0x1000>;
104			clocks = <&ccu CLK_BUS_MMC0>,
105				 <&ccu CLK_MMC0>,
106				 <&ccu CLK_MMC0_OUTPUT>,
107				 <&ccu CLK_MMC0_SAMPLE>;
108			clock-names = "ahb", "mmc", "output", "sample";
109			resets = <&ccu RST_BUS_MMC0>;
110			reset-names = "ahb";
111			interrupts = <23>;
112			pinctrl-names = "default";
113			pinctrl-0 = <&mmc0_pins>;
114			status = "disabled";
115			#address-cells = <1>;
116			#size-cells = <0>;
117		};
118
119		mmc1: mmc@1c10000 {
120			compatible = "allwinner,suniv-f1c100s-mmc",
121				     "allwinner,sun7i-a20-mmc";
122			reg = <0x01c10000 0x1000>;
123			clocks = <&ccu CLK_BUS_MMC1>,
124				 <&ccu CLK_MMC1>,
125				 <&ccu CLK_MMC1_OUTPUT>,
126				 <&ccu CLK_MMC1_SAMPLE>;
127			clock-names = "ahb", "mmc", "output", "sample";
128			resets = <&ccu RST_BUS_MMC1>;
129			reset-names = "ahb";
130			interrupts = <24>;
131			status = "disabled";
132			#address-cells = <1>;
133			#size-cells = <0>;
134		};
135
136		usb_otg: usb@1c13000 {
137			compatible = "allwinner,suniv-f1c100s-musb";
138			reg = <0x01c13000 0x0400>;
139			clocks = <&ccu CLK_BUS_OTG>;
140			resets = <&ccu RST_BUS_OTG>;
141			interrupts = <26>;
142			interrupt-names = "mc";
143			phys = <&usbphy 0>;
144			phy-names = "usb";
145			extcon = <&usbphy 0>;
146			allwinner,sram = <&otg_sram 1>;
147			status = "disabled";
148		};
149
150		usbphy: phy@1c13400 {
151			compatible = "allwinner,suniv-f1c100s-usb-phy";
152			reg = <0x01c13400 0x10>;
153			reg-names = "phy_ctrl";
154			clocks = <&ccu CLK_USB_PHY0>;
155			clock-names = "usb0_phy";
156			resets = <&ccu RST_USB_PHY0>;
157			reset-names = "usb0_reset";
158			#phy-cells = <1>;
159			status = "disabled";
160		};
161
162		ccu: clock@1c20000 {
163			compatible = "allwinner,suniv-f1c100s-ccu";
164			reg = <0x01c20000 0x400>;
165			clocks = <&osc24M>, <&osc32k>;
166			clock-names = "hosc", "losc";
167			#clock-cells = <1>;
168			#reset-cells = <1>;
169		};
170
171		intc: interrupt-controller@1c20400 {
172			compatible = "allwinner,suniv-f1c100s-ic";
173			reg = <0x01c20400 0x400>;
174			interrupt-controller;
175			#interrupt-cells = <1>;
176		};
177
178		pio: pinctrl@1c20800 {
179			compatible = "allwinner,suniv-f1c100s-pinctrl";
180			reg = <0x01c20800 0x400>;
181			interrupts = <38>, <39>, <40>;
182			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
183			clock-names = "apb", "hosc", "losc";
184			gpio-controller;
185			interrupt-controller;
186			#interrupt-cells = <3>;
187			#gpio-cells = <3>;
188
189			mmc0_pins: mmc0-pins {
190				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
191				function = "mmc0";
192				drive-strength = <30>;
193			};
194
195			/omit-if-no-ref/
196			i2c0_pd_pins: i2c0-pd-pins {
197				pins = "PD0", "PD12";
198				function = "i2c0";
199			};
200
201			spi0_pc_pins: spi0-pc-pins {
202				pins = "PC0", "PC1", "PC2", "PC3";
203				function = "spi0";
204			};
205
206			uart0_pe_pins: uart0-pe-pins {
207				pins = "PE0", "PE1";
208				function = "uart0";
209			};
210
211			/omit-if-no-ref/
212			uart1_pa_pins: uart1-pa-pins {
213				pins = "PA2", "PA3";
214				function = "uart1";
215			};
216		};
217
218		i2c0: i2c@1c27000 {
219			compatible = "allwinner,suniv-f1c100s-i2c",
220				     "allwinner,sun6i-a31-i2c";
221			reg = <0x01c27000 0x400>;
222			interrupts = <7>;
223			clocks = <&ccu CLK_BUS_I2C0>;
224			resets = <&ccu RST_BUS_I2C0>;
225			#address-cells = <1>;
226			#size-cells = <0>;
227			status = "disabled";
228		};
229
230		i2c1: i2c@1c27400 {
231			compatible = "allwinner,suniv-f1c100s-i2c",
232				     "allwinner,sun6i-a31-i2c";
233			reg = <0x01c27400 0x400>;
234			interrupts = <8>;
235			clocks = <&ccu CLK_BUS_I2C1>;
236			resets = <&ccu RST_BUS_I2C1>;
237			#address-cells = <1>;
238			#size-cells = <0>;
239			status = "disabled";
240		};
241
242		i2c2: i2c@1c27800 {
243			compatible = "allwinner,suniv-f1c100s-i2c",
244				     "allwinner,sun6i-a31-i2c";
245			reg = <0x01c27800 0x400>;
246			interrupts = <9>;
247			clocks = <&ccu CLK_BUS_I2C2>;
248			resets = <&ccu RST_BUS_I2C2>;
249			#address-cells = <1>;
250			#size-cells = <0>;
251			status = "disabled";
252		};
253
254		timer@1c20c00 {
255			compatible = "allwinner,suniv-f1c100s-timer";
256			reg = <0x01c20c00 0x90>;
257			interrupts = <13>, <14>, <15>;
258			clocks = <&osc24M>;
259		};
260
261		wdt: watchdog@1c20ca0 {
262			compatible = "allwinner,suniv-f1c100s-wdt",
263				     "allwinner,sun6i-a31-wdt";
264			reg = <0x01c20ca0 0x20>;
265			interrupts = <16>;
266			clocks = <&osc32k>;
267		};
268
269		pwm: pwm@1c21000 {
270			compatible = "allwinner,suniv-f1c100s-pwm",
271				     "allwinner,sun7i-a20-pwm";
272			reg = <0x01c21000 0x400>;
273			clocks = <&osc24M>;
274			#pwm-cells = <3>;
275			status = "disabled";
276		};
277
278		ir: ir@1c22c00 {
279			compatible = "allwinner,suniv-f1c100s-ir",
280				     "allwinner,sun6i-a31-ir";
281			reg = <0x01c22c00 0x400>;
282			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
283			clock-names = "apb", "ir";
284			resets = <&ccu RST_BUS_IR>;
285			interrupts = <6>;
286			status = "disabled";
287		};
288
289		lradc: lradc@1c23400 {
290			compatible = "allwinner,suniv-f1c100s-lradc",
291				     "allwinner,sun8i-a83t-r-lradc";
292			reg = <0x01c23400 0x400>;
293			interrupts = <22>;
294			status = "disabled";
295		};
296
297		uart0: serial@1c25000 {
298			compatible = "snps,dw-apb-uart";
299			reg = <0x01c25000 0x400>;
300			interrupts = <1>;
301			reg-shift = <2>;
302			reg-io-width = <4>;
303			clocks = <&ccu CLK_BUS_UART0>;
304			resets = <&ccu RST_BUS_UART0>;
305			status = "disabled";
306		};
307
308		uart1: serial@1c25400 {
309			compatible = "snps,dw-apb-uart";
310			reg = <0x01c25400 0x400>;
311			interrupts = <2>;
312			reg-shift = <2>;
313			reg-io-width = <4>;
314			clocks = <&ccu CLK_BUS_UART1>;
315			resets = <&ccu RST_BUS_UART1>;
316			status = "disabled";
317		};
318
319		uart2: serial@1c25800 {
320			compatible = "snps,dw-apb-uart";
321			reg = <0x01c25800 0x400>;
322			interrupts = <3>;
323			reg-shift = <2>;
324			reg-io-width = <4>;
325			clocks = <&ccu CLK_BUS_UART2>;
326			resets = <&ccu RST_BUS_UART2>;
327			status = "disabled";
328		};
329	};
330};
331