1/* 2 * Copyright 2014 Chen-Yu Tsai 3 * 4 * Chen-Yu Tsai <wens@csie.org> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45#include <dt-bindings/interrupt-controller/arm-gic.h> 46 47#include <dt-bindings/clock/sun9i-a80-ccu.h> 48#include <dt-bindings/clock/sun9i-a80-de.h> 49#include <dt-bindings/clock/sun9i-a80-usb.h> 50#include <dt-bindings/reset/sun9i-a80-ccu.h> 51#include <dt-bindings/reset/sun9i-a80-de.h> 52#include <dt-bindings/reset/sun9i-a80-usb.h> 53 54/ { 55 #address-cells = <2>; 56 #size-cells = <2>; 57 interrupt-parent = <&gic>; 58 59 aliases { 60 ethernet0 = &gmac; 61 }; 62 63 cpus { 64 #address-cells = <1>; 65 #size-cells = <0>; 66 67 cpu0: cpu@0 { 68 compatible = "arm,cortex-a7"; 69 device_type = "cpu"; 70 cci-control-port = <&cci_control0>; 71 clock-frequency = <12000000>; 72 enable-method = "allwinner,sun9i-a80-smp"; 73 reg = <0x0>; 74 }; 75 76 cpu1: cpu@1 { 77 compatible = "arm,cortex-a7"; 78 device_type = "cpu"; 79 cci-control-port = <&cci_control0>; 80 clock-frequency = <12000000>; 81 enable-method = "allwinner,sun9i-a80-smp"; 82 reg = <0x1>; 83 }; 84 85 cpu2: cpu@2 { 86 compatible = "arm,cortex-a7"; 87 device_type = "cpu"; 88 cci-control-port = <&cci_control0>; 89 clock-frequency = <12000000>; 90 enable-method = "allwinner,sun9i-a80-smp"; 91 reg = <0x2>; 92 }; 93 94 cpu3: cpu@3 { 95 compatible = "arm,cortex-a7"; 96 device_type = "cpu"; 97 cci-control-port = <&cci_control0>; 98 clock-frequency = <12000000>; 99 enable-method = "allwinner,sun9i-a80-smp"; 100 reg = <0x3>; 101 }; 102 103 cpu4: cpu@100 { 104 compatible = "arm,cortex-a15"; 105 device_type = "cpu"; 106 cci-control-port = <&cci_control1>; 107 clock-frequency = <18000000>; 108 enable-method = "allwinner,sun9i-a80-smp"; 109 reg = <0x100>; 110 }; 111 112 cpu5: cpu@101 { 113 compatible = "arm,cortex-a15"; 114 device_type = "cpu"; 115 cci-control-port = <&cci_control1>; 116 clock-frequency = <18000000>; 117 enable-method = "allwinner,sun9i-a80-smp"; 118 reg = <0x101>; 119 }; 120 121 cpu6: cpu@102 { 122 compatible = "arm,cortex-a15"; 123 device_type = "cpu"; 124 cci-control-port = <&cci_control1>; 125 clock-frequency = <18000000>; 126 enable-method = "allwinner,sun9i-a80-smp"; 127 reg = <0x102>; 128 }; 129 130 cpu7: cpu@103 { 131 compatible = "arm,cortex-a15"; 132 device_type = "cpu"; 133 cci-control-port = <&cci_control1>; 134 clock-frequency = <18000000>; 135 enable-method = "allwinner,sun9i-a80-smp"; 136 reg = <0x103>; 137 }; 138 }; 139 140 timer { 141 compatible = "arm,armv7-timer"; 142 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 143 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 144 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 145 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 146 clock-frequency = <24000000>; 147 arm,cpu-registers-not-fw-configured; 148 }; 149 150 clocks { 151 #address-cells = <1>; 152 #size-cells = <1>; 153 /* 154 * map 64 bit address range down to 32 bits, 155 * as the peripherals are all under 512MB. 156 */ 157 ranges = <0 0 0 0x20000000>; 158 159 /* 160 * This clock is actually configurable from the PRCM address 161 * space. The external 24M oscillator can be turned off, and 162 * the clock switched to an internal 16M RC oscillator. Under 163 * normal operation there's no reason to do this, and the 164 * default is to use the external good one, so just model this 165 * as a fixed clock. Also it is not entirely clear if the 166 * osc24M mux in the PRCM affects the entire clock tree, which 167 * would also throw all the PLL clock rates off, or just the 168 * downstream clocks in the PRCM. 169 */ 170 osc24M: clk-24M { 171 #clock-cells = <0>; 172 compatible = "fixed-clock"; 173 clock-frequency = <24000000>; 174 clock-output-names = "osc24M"; 175 }; 176 177 /* 178 * The 32k clock is from an external source, normally the 179 * AC100 codec/RTC chip. This serves as a placeholder for 180 * board dts files to specify the source. 181 */ 182 osc32k: clk-32k { 183 #clock-cells = <0>; 184 compatible = "fixed-factor-clock"; 185 clock-div = <1>; 186 clock-mult = <1>; 187 clock-output-names = "osc32k"; 188 }; 189 190 /* 191 * The following two are dummy clocks, placeholders 192 * used in the gmac_tx clock. The gmac driver will 193 * choose one parent depending on the PHY interface 194 * mode, using clk_set_rate auto-reparenting. 195 * 196 * The actual TX clock rate is not controlled by the 197 * gmac_tx clock. 198 */ 199 mii_phy_tx_clk: mii_phy_tx_clk { 200 #clock-cells = <0>; 201 compatible = "fixed-clock"; 202 clock-frequency = <25000000>; 203 clock-output-names = "mii_phy_tx"; 204 }; 205 206 gmac_int_tx_clk: gmac_int_tx_clk { 207 #clock-cells = <0>; 208 compatible = "fixed-clock"; 209 clock-frequency = <125000000>; 210 clock-output-names = "gmac_int_tx"; 211 }; 212 213 gmac_tx_clk: clk@800030 { 214 #clock-cells = <0>; 215 compatible = "allwinner,sun7i-a20-gmac-clk"; 216 reg = <0x00800030 0x4>; 217 clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; 218 clock-output-names = "gmac_tx"; 219 }; 220 221 cpus_clk: clk@8001410 { 222 compatible = "allwinner,sun9i-a80-cpus-clk"; 223 reg = <0x08001410 0x4>; 224 #clock-cells = <0>; 225 clocks = <&osc32k>, <&osc24M>, 226 <&ccu CLK_PLL_PERIPH0>, 227 <&ccu CLK_PLL_AUDIO>; 228 clock-output-names = "cpus"; 229 }; 230 231 ahbs: clk-ahbs { 232 compatible = "fixed-factor-clock"; 233 #clock-cells = <0>; 234 clock-div = <1>; 235 clock-mult = <1>; 236 clocks = <&cpus_clk>; 237 clock-output-names = "ahbs"; 238 }; 239 240 apbs: clk@800141c { 241 compatible = "allwinner,sun8i-a23-apb0-clk"; 242 reg = <0x0800141c 0x4>; 243 #clock-cells = <0>; 244 clocks = <&ahbs>; 245 clock-output-names = "apbs"; 246 }; 247 248 apbs_gates: clk@8001428 { 249 compatible = "allwinner,sun9i-a80-apbs-gates-clk"; 250 reg = <0x08001428 0x4>; 251 #clock-cells = <1>; 252 clocks = <&apbs>; 253 clock-indices = <0>, <1>, 254 <2>, <3>, 255 <4>, <5>, 256 <6>, <7>, 257 <12>, <13>, 258 <16>, <17>, 259 <18>, <20>; 260 clock-output-names = "apbs_pio", "apbs_ir", 261 "apbs_timer", "apbs_rsb", 262 "apbs_uart", "apbs_1wire", 263 "apbs_i2c0", "apbs_i2c1", 264 "apbs_ps2_0", "apbs_ps2_1", 265 "apbs_dma", "apbs_i2s0", 266 "apbs_i2s1", "apbs_twd"; 267 }; 268 269 r_1wire_clk: clk@8001450 { 270 reg = <0x08001450 0x4>; 271 #clock-cells = <0>; 272 compatible = "allwinner,sun4i-a10-mod0-clk"; 273 clocks = <&osc32k>, <&osc24M>; 274 clock-output-names = "r_1wire"; 275 }; 276 277 r_ir_clk: clk@8001454 { 278 reg = <0x08001454 0x4>; 279 #clock-cells = <0>; 280 compatible = "allwinner,sun4i-a10-mod0-clk"; 281 clocks = <&osc32k>, <&osc24M>; 282 clock-output-names = "r_ir"; 283 }; 284 }; 285 286 de: display-engine { 287 compatible = "allwinner,sun9i-a80-display-engine"; 288 allwinner,pipelines = <&fe0>, <&fe1>; 289 status = "disabled"; 290 }; 291 292 soc@20000 { 293 compatible = "simple-bus"; 294 #address-cells = <1>; 295 #size-cells = <1>; 296 /* 297 * map 64 bit address range down to 32 bits, 298 * as the peripherals are all under 512MB. 299 */ 300 ranges = <0 0 0 0x20000000>; 301 302 sram_b: sram@20000 { 303 /* 256 KiB secure SRAM at 0x20000 */ 304 compatible = "mmio-sram"; 305 reg = <0x00020000 0x40000>; 306 307 #address-cells = <1>; 308 #size-cells = <1>; 309 ranges = <0 0x00020000 0x40000>; 310 311 smp-sram@1000 { 312 /* 313 * This is checked by BROM to determine if 314 * cpu0 should jump to SMP entry vector 315 */ 316 compatible = "allwinner,sun9i-a80-smp-sram"; 317 reg = <0x1000 0x8>; 318 }; 319 }; 320 321 gmac: ethernet@830000 { 322 compatible = "allwinner,sun7i-a20-gmac"; 323 reg = <0x00830000 0x1054>; 324 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 325 interrupt-names = "macirq"; 326 clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>; 327 clock-names = "stmmaceth", "allwinner_gmac_tx"; 328 resets = <&ccu RST_BUS_GMAC>; 329 reset-names = "stmmaceth"; 330 snps,pbl = <2>; 331 snps,fixed-burst; 332 snps,force_sf_dma_mode; 333 status = "disabled"; 334 335 mdio: mdio { 336 compatible = "snps,dwmac-mdio"; 337 #address-cells = <1>; 338 #size-cells = <0>; 339 }; 340 }; 341 342 ehci0: usb@a00000 { 343 compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; 344 reg = <0x00a00000 0x100>; 345 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 346 clocks = <&usb_clocks CLK_BUS_HCI0>; 347 resets = <&usb_clocks RST_USB0_HCI>; 348 phys = <&usbphy1>; 349 phy-names = "usb"; 350 status = "disabled"; 351 }; 352 353 ohci0: usb@a00400 { 354 compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; 355 reg = <0x00a00400 0x100>; 356 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 357 clocks = <&usb_clocks CLK_BUS_HCI0>, 358 <&usb_clocks CLK_USB_OHCI0>; 359 resets = <&usb_clocks RST_USB0_HCI>; 360 phys = <&usbphy1>; 361 phy-names = "usb"; 362 status = "disabled"; 363 }; 364 365 usbphy1: phy@a00800 { 366 compatible = "allwinner,sun9i-a80-usb-phy"; 367 reg = <0x00a00800 0x4>; 368 clocks = <&usb_clocks CLK_USB0_PHY>; 369 clock-names = "phy"; 370 resets = <&usb_clocks RST_USB0_PHY>; 371 reset-names = "phy"; 372 status = "disabled"; 373 #phy-cells = <0>; 374 }; 375 376 ehci1: usb@a01000 { 377 compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; 378 reg = <0x00a01000 0x100>; 379 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 380 clocks = <&usb_clocks CLK_BUS_HCI1>; 381 resets = <&usb_clocks RST_USB1_HCI>; 382 phys = <&usbphy2>; 383 phy-names = "usb"; 384 status = "disabled"; 385 }; 386 387 usbphy2: phy@a01800 { 388 compatible = "allwinner,sun9i-a80-usb-phy"; 389 reg = <0x00a01800 0x4>; 390 clocks = <&usb_clocks CLK_USB1_PHY>, 391 <&usb_clocks CLK_USB_HSIC>, 392 <&usb_clocks CLK_USB1_HSIC>; 393 clock-names = "phy", 394 "hsic_12M", 395 "hsic_480M"; 396 resets = <&usb_clocks RST_USB1_PHY>, 397 <&usb_clocks RST_USB1_HSIC>; 398 reset-names = "phy", 399 "hsic"; 400 status = "disabled"; 401 #phy-cells = <0>; 402 /* usb1 is always used with HSIC */ 403 phy_type = "hsic"; 404 }; 405 406 ehci2: usb@a02000 { 407 compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; 408 reg = <0x00a02000 0x100>; 409 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; 410 clocks = <&usb_clocks CLK_BUS_HCI2>; 411 resets = <&usb_clocks RST_USB2_HCI>; 412 phys = <&usbphy3>; 413 phy-names = "usb"; 414 status = "disabled"; 415 }; 416 417 ohci2: usb@a02400 { 418 compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; 419 reg = <0x00a02400 0x100>; 420 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; 421 clocks = <&usb_clocks CLK_BUS_HCI2>, 422 <&usb_clocks CLK_USB_OHCI2>; 423 resets = <&usb_clocks RST_USB2_HCI>; 424 phys = <&usbphy3>; 425 phy-names = "usb"; 426 status = "disabled"; 427 }; 428 429 usbphy3: phy@a02800 { 430 compatible = "allwinner,sun9i-a80-usb-phy"; 431 reg = <0x00a02800 0x4>; 432 clocks = <&usb_clocks CLK_USB2_PHY>, 433 <&usb_clocks CLK_USB_HSIC>, 434 <&usb_clocks CLK_USB2_HSIC>; 435 clock-names = "phy", 436 "hsic_12M", 437 "hsic_480M"; 438 resets = <&usb_clocks RST_USB2_PHY>, 439 <&usb_clocks RST_USB2_HSIC>; 440 reset-names = "phy", 441 "hsic"; 442 status = "disabled"; 443 #phy-cells = <0>; 444 }; 445 446 usb_clocks: clock@a08000 { 447 compatible = "allwinner,sun9i-a80-usb-clks"; 448 reg = <0x00a08000 0x8>; 449 clocks = <&ccu CLK_BUS_USB>, <&osc24M>; 450 clock-names = "bus", "hosc"; 451 #clock-cells = <1>; 452 #reset-cells = <1>; 453 }; 454 455 cpucfg@1700000 { 456 compatible = "allwinner,sun9i-a80-cpucfg"; 457 reg = <0x01700000 0x100>; 458 }; 459 460 crypto: crypto@1c02000 { 461 compatible = "allwinner,sun9i-a80-crypto"; 462 reg = <0x01c02000 0x1000>; 463 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 464 resets = <&ccu RST_BUS_SS>; 465 clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; 466 clock-names = "bus", "mod"; 467 }; 468 469 mmc0: mmc@1c0f000 { 470 compatible = "allwinner,sun9i-a80-mmc"; 471 reg = <0x01c0f000 0x1000>; 472 clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, 473 <&ccu CLK_MMC0_OUTPUT>, 474 <&ccu CLK_MMC0_SAMPLE>; 475 clock-names = "ahb", "mmc", "output", "sample"; 476 resets = <&mmc_config_clk 0>; 477 reset-names = "ahb"; 478 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; 479 status = "disabled"; 480 #address-cells = <1>; 481 #size-cells = <0>; 482 }; 483 484 mmc1: mmc@1c10000 { 485 compatible = "allwinner,sun9i-a80-mmc"; 486 reg = <0x01c10000 0x1000>; 487 clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, 488 <&ccu CLK_MMC1_OUTPUT>, 489 <&ccu CLK_MMC1_SAMPLE>; 490 clock-names = "ahb", "mmc", "output", "sample"; 491 resets = <&mmc_config_clk 1>; 492 reset-names = "ahb"; 493 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; 494 status = "disabled"; 495 #address-cells = <1>; 496 #size-cells = <0>; 497 }; 498 499 mmc2: mmc@1c11000 { 500 compatible = "allwinner,sun9i-a80-mmc"; 501 reg = <0x01c11000 0x1000>; 502 clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, 503 <&ccu CLK_MMC2_OUTPUT>, 504 <&ccu CLK_MMC2_SAMPLE>; 505 clock-names = "ahb", "mmc", "output", "sample"; 506 resets = <&mmc_config_clk 2>; 507 reset-names = "ahb"; 508 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; 509 status = "disabled"; 510 #address-cells = <1>; 511 #size-cells = <0>; 512 }; 513 514 mmc3: mmc@1c12000 { 515 compatible = "allwinner,sun9i-a80-mmc"; 516 reg = <0x01c12000 0x1000>; 517 clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, 518 <&ccu CLK_MMC3_OUTPUT>, 519 <&ccu CLK_MMC3_SAMPLE>; 520 clock-names = "ahb", "mmc", "output", "sample"; 521 resets = <&mmc_config_clk 3>; 522 reset-names = "ahb"; 523 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; 524 status = "disabled"; 525 #address-cells = <1>; 526 #size-cells = <0>; 527 }; 528 529 mmc_config_clk: clk@1c13000 { 530 compatible = "allwinner,sun9i-a80-mmc-config-clk"; 531 reg = <0x01c13000 0x10>; 532 clocks = <&ccu CLK_BUS_MMC>; 533 resets = <&ccu RST_BUS_MMC>; 534 #clock-cells = <1>; 535 #reset-cells = <1>; 536 clock-output-names = "mmc0_config", "mmc1_config", 537 "mmc2_config", "mmc3_config"; 538 }; 539 540 gic: interrupt-controller@1c41000 { 541 compatible = "arm,gic-400"; 542 reg = <0x01c41000 0x1000>, 543 <0x01c42000 0x2000>, 544 <0x01c44000 0x2000>, 545 <0x01c46000 0x2000>; 546 interrupt-controller; 547 #interrupt-cells = <3>; 548 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 549 }; 550 551 cci: cci@1c90000 { 552 compatible = "arm,cci-400"; 553 #address-cells = <1>; 554 #size-cells = <1>; 555 reg = <0x01c90000 0x1000>; 556 ranges = <0x0 0x01c90000 0x10000>; 557 558 cci_control0: slave-if@4000 { 559 compatible = "arm,cci-400-ctrl-if"; 560 interface-type = "ace"; 561 reg = <0x4000 0x1000>; 562 }; 563 564 cci_control1: slave-if@5000 { 565 compatible = "arm,cci-400-ctrl-if"; 566 interface-type = "ace"; 567 reg = <0x5000 0x1000>; 568 }; 569 570 pmu@9000 { 571 compatible = "arm,cci-400-pmu,r1"; 572 reg = <0x9000 0x5000>; 573 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 574 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 575 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 576 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 577 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; 578 }; 579 }; 580 581 de_clocks: clock@3000000 { 582 compatible = "allwinner,sun9i-a80-de-clks"; 583 reg = <0x03000000 0x30>; 584 clocks = <&ccu CLK_DE>, 585 <&ccu CLK_SDRAM>, 586 <&ccu CLK_BUS_DE>; 587 clock-names = "mod", 588 "dram", 589 "bus"; 590 resets = <&ccu RST_BUS_DE>; 591 #clock-cells = <1>; 592 #reset-cells = <1>; 593 }; 594 595 fe0: display-frontend@3100000 { 596 compatible = "allwinner,sun9i-a80-display-frontend"; 597 reg = <0x03100000 0x40000>; 598 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; 599 clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>, 600 <&de_clocks CLK_DRAM_FE0>; 601 clock-names = "ahb", "mod", 602 "ram"; 603 resets = <&de_clocks RST_FE0>; 604 605 ports { 606 #address-cells = <1>; 607 #size-cells = <0>; 608 609 fe0_out: port@1 { 610 reg = <1>; 611 612 fe0_out_deu0: endpoint { 613 remote-endpoint = <&deu0_in_fe0>; 614 }; 615 }; 616 }; 617 }; 618 619 fe1: display-frontend@3140000 { 620 compatible = "allwinner,sun9i-a80-display-frontend"; 621 reg = <0x03140000 0x40000>; 622 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; 623 clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>, 624 <&de_clocks CLK_DRAM_FE1>; 625 clock-names = "ahb", "mod", 626 "ram"; 627 resets = <&de_clocks RST_FE0>; 628 629 ports { 630 #address-cells = <1>; 631 #size-cells = <0>; 632 633 fe1_out: port@1 { 634 reg = <1>; 635 636 fe1_out_deu1: endpoint { 637 remote-endpoint = <&deu1_in_fe1>; 638 }; 639 }; 640 }; 641 }; 642 643 be0: display-backend@3200000 { 644 compatible = "allwinner,sun9i-a80-display-backend"; 645 reg = <0x03200000 0x40000>; 646 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 647 clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>, 648 <&de_clocks CLK_DRAM_BE0>; 649 clock-names = "ahb", "mod", 650 "ram"; 651 resets = <&de_clocks RST_BE0>; 652 653 ports { 654 #address-cells = <1>; 655 #size-cells = <0>; 656 657 be0_in: port@0 { 658 #address-cells = <1>; 659 #size-cells = <0>; 660 reg = <0>; 661 662 be0_in_deu0: endpoint@0 { 663 reg = <0>; 664 remote-endpoint = <&deu0_out_be0>; 665 }; 666 667 be0_in_deu1: endpoint@1 { 668 reg = <1>; 669 remote-endpoint = <&deu1_out_be0>; 670 }; 671 }; 672 673 be0_out: port@1 { 674 reg = <1>; 675 676 be0_out_drc0: endpoint { 677 remote-endpoint = <&drc0_in_be0>; 678 }; 679 }; 680 }; 681 }; 682 683 be1: display-backend@3240000 { 684 compatible = "allwinner,sun9i-a80-display-backend"; 685 reg = <0x03240000 0x40000>; 686 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 687 clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>, 688 <&de_clocks CLK_DRAM_BE1>; 689 clock-names = "ahb", "mod", 690 "ram"; 691 resets = <&de_clocks RST_BE1>; 692 693 ports { 694 #address-cells = <1>; 695 #size-cells = <0>; 696 697 be1_in: port@0 { 698 #address-cells = <1>; 699 #size-cells = <0>; 700 reg = <0>; 701 702 be1_in_deu0: endpoint@0 { 703 reg = <0>; 704 remote-endpoint = <&deu0_out_be1>; 705 }; 706 707 be1_in_deu1: endpoint@1 { 708 reg = <1>; 709 remote-endpoint = <&deu1_out_be1>; 710 }; 711 }; 712 713 be1_out: port@1 { 714 reg = <1>; 715 716 be1_out_drc1: endpoint { 717 remote-endpoint = <&drc1_in_be1>; 718 }; 719 }; 720 }; 721 }; 722 723 deu0: deu@3300000 { 724 compatible = "allwinner,sun9i-a80-deu"; 725 reg = <0x03300000 0x40000>; 726 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; 727 clocks = <&de_clocks CLK_BUS_DEU0>, 728 <&de_clocks CLK_IEP_DEU0>, 729 <&de_clocks CLK_DRAM_DEU0>; 730 clock-names = "ahb", 731 "mod", 732 "ram"; 733 resets = <&de_clocks RST_DEU0>; 734 735 ports { 736 #address-cells = <1>; 737 #size-cells = <0>; 738 739 deu0_in: port@0 { 740 reg = <0>; 741 742 deu0_in_fe0: endpoint { 743 remote-endpoint = <&fe0_out_deu0>; 744 }; 745 }; 746 747 deu0_out: port@1 { 748 #address-cells = <1>; 749 #size-cells = <0>; 750 reg = <1>; 751 752 deu0_out_be0: endpoint@0 { 753 reg = <0>; 754 remote-endpoint = <&be0_in_deu0>; 755 }; 756 757 deu0_out_be1: endpoint@1 { 758 reg = <1>; 759 remote-endpoint = <&be1_in_deu0>; 760 }; 761 }; 762 }; 763 }; 764 765 deu1: deu@3340000 { 766 compatible = "allwinner,sun9i-a80-deu"; 767 reg = <0x03340000 0x40000>; 768 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; 769 clocks = <&de_clocks CLK_BUS_DEU1>, 770 <&de_clocks CLK_IEP_DEU1>, 771 <&de_clocks CLK_DRAM_DEU1>; 772 clock-names = "ahb", 773 "mod", 774 "ram"; 775 resets = <&de_clocks RST_DEU1>; 776 777 ports { 778 #address-cells = <1>; 779 #size-cells = <0>; 780 781 deu1_in: port@0 { 782 reg = <0>; 783 784 deu1_in_fe1: endpoint { 785 remote-endpoint = <&fe1_out_deu1>; 786 }; 787 }; 788 789 deu1_out: port@1 { 790 #address-cells = <1>; 791 #size-cells = <0>; 792 reg = <1>; 793 794 deu1_out_be0: endpoint@0 { 795 reg = <0>; 796 remote-endpoint = <&be0_in_deu1>; 797 }; 798 799 deu1_out_be1: endpoint@1 { 800 reg = <1>; 801 remote-endpoint = <&be1_in_deu1>; 802 }; 803 }; 804 }; 805 }; 806 807 drc0: drc@3400000 { 808 compatible = "allwinner,sun9i-a80-drc"; 809 reg = <0x03400000 0x40000>; 810 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 811 clocks = <&de_clocks CLK_BUS_DRC0>, 812 <&de_clocks CLK_IEP_DRC0>, 813 <&de_clocks CLK_DRAM_DRC0>; 814 clock-names = "ahb", 815 "mod", 816 "ram"; 817 resets = <&de_clocks RST_DRC0>; 818 819 ports { 820 #address-cells = <1>; 821 #size-cells = <0>; 822 823 drc0_in: port@0 { 824 reg = <0>; 825 826 drc0_in_be0: endpoint { 827 remote-endpoint = <&be0_out_drc0>; 828 }; 829 }; 830 831 drc0_out: port@1 { 832 reg = <1>; 833 834 drc0_out_tcon0: endpoint { 835 remote-endpoint = <&tcon0_in_drc0>; 836 }; 837 }; 838 }; 839 }; 840 841 drc1: drc@3440000 { 842 compatible = "allwinner,sun9i-a80-drc"; 843 reg = <0x03440000 0x40000>; 844 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 845 clocks = <&de_clocks CLK_BUS_DRC1>, 846 <&de_clocks CLK_IEP_DRC1>, 847 <&de_clocks CLK_DRAM_DRC1>; 848 clock-names = "ahb", 849 "mod", 850 "ram"; 851 resets = <&de_clocks RST_DRC1>; 852 853 ports { 854 #address-cells = <1>; 855 #size-cells = <0>; 856 857 drc1_in: port@0 { 858 reg = <0>; 859 860 drc1_in_be1: endpoint { 861 remote-endpoint = <&be1_out_drc1>; 862 }; 863 }; 864 865 drc1_out: port@1 { 866 reg = <1>; 867 868 drc1_out_tcon1: endpoint { 869 remote-endpoint = <&tcon1_in_drc1>; 870 }; 871 }; 872 }; 873 }; 874 875 tcon0: lcd-controller@3c00000 { 876 compatible = "allwinner,sun9i-a80-tcon-lcd"; 877 reg = <0x03c00000 0x10000>; 878 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 879 clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; 880 clock-names = "ahb", "tcon-ch0"; 881 resets = <&ccu RST_BUS_LCD0>, 882 <&ccu RST_BUS_EDP>, 883 <&ccu RST_BUS_LVDS>; 884 reset-names = "lcd", 885 "edp", 886 "lvds"; 887 clock-output-names = "tcon0-pixel-clock"; 888 #clock-cells = <0>; 889 890 ports { 891 #address-cells = <1>; 892 #size-cells = <0>; 893 894 tcon0_in: port@0 { 895 reg = <0>; 896 897 tcon0_in_drc0: endpoint { 898 remote-endpoint = <&drc0_out_tcon0>; 899 }; 900 }; 901 902 tcon0_out: port@1 { 903 reg = <1>; 904 }; 905 }; 906 }; 907 908 tcon1: lcd-controller@3c10000 { 909 compatible = "allwinner,sun9i-a80-tcon-tv"; 910 reg = <0x03c10000 0x10000>; 911 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 912 clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>; 913 clock-names = "ahb", "tcon-ch1"; 914 resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>; 915 reset-names = "lcd", "edp"; 916 917 ports { 918 #address-cells = <1>; 919 #size-cells = <0>; 920 921 tcon1_in: port@0 { 922 reg = <0>; 923 924 tcon1_in_drc1: endpoint { 925 remote-endpoint = <&drc1_out_tcon1>; 926 }; 927 }; 928 929 tcon1_out: port@1 { 930 reg = <1>; 931 }; 932 }; 933 }; 934 935 ccu: clock@6000000 { 936 compatible = "allwinner,sun9i-a80-ccu"; 937 reg = <0x06000000 0x800>; 938 clocks = <&osc24M>, <&osc32k>; 939 clock-names = "hosc", "losc"; 940 #clock-cells = <1>; 941 #reset-cells = <1>; 942 }; 943 944 timer@6000c00 { 945 compatible = "allwinner,sun4i-a10-timer"; 946 reg = <0x06000c00 0xa0>; 947 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, 948 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 949 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, 950 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, 951 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, 952 <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 953 954 clocks = <&osc24M>; 955 }; 956 957 wdt: watchdog@6000ca0 { 958 compatible = "allwinner,sun6i-a31-wdt"; 959 reg = <0x06000ca0 0x20>; 960 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 961 clocks = <&osc24M>; 962 }; 963 964 pio: pinctrl@6000800 { 965 compatible = "allwinner,sun9i-a80-pinctrl"; 966 reg = <0x06000800 0x400>; 967 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, 968 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, 969 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, 970 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, 971 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; 972 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; 973 clock-names = "apb", "hosc", "losc"; 974 gpio-controller; 975 interrupt-controller; 976 #interrupt-cells = <3>; 977 #gpio-cells = <3>; 978 979 gmac_rgmii_pins: gmac-rgmii-pins { 980 pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", 981 "PA7", "PA8", "PA9", "PA10", "PA12", 982 "PA13", "PA15", "PA16", "PA17"; 983 function = "gmac"; 984 /* 985 * data lines in RGMII mode use DDR mode 986 * and need a higher signal drive strength 987 */ 988 drive-strength = <40>; 989 }; 990 991 i2c3_pins: i2c3-pins { 992 pins = "PG10", "PG11"; 993 function = "i2c3"; 994 }; 995 996 lcd0_rgb888_pins: lcd0-rgb888-pins { 997 pins = "PD0", "PD1", "PD2", "PD3", 998 "PD4", "PD5", "PD6", "PD7", 999 "PD8", "PD9", "PD10", "PD11", 1000 "PD12", "PD13", "PD14", "PD15", 1001 "PD16", "PD17", "PD18", "PD19", 1002 "PD20", "PD21", "PD22", "PD23", 1003 "PD24", "PD25", "PD26", "PD27"; 1004 function = "lcd0"; 1005 }; 1006 1007 mmc0_pins: mmc0-pins { 1008 pins = "PF0", "PF1" ,"PF2", "PF3", 1009 "PF4", "PF5"; 1010 function = "mmc0"; 1011 drive-strength = <30>; 1012 bias-pull-up; 1013 }; 1014 1015 mmc1_pins: mmc1-pins { 1016 pins = "PG0", "PG1" ,"PG2", "PG3", 1017 "PG4", "PG5"; 1018 function = "mmc1"; 1019 drive-strength = <30>; 1020 bias-pull-up; 1021 }; 1022 1023 mmc2_8bit_pins: mmc2-8bit-pins { 1024 pins = "PC6", "PC7", "PC8", "PC9", 1025 "PC10", "PC11", "PC12", 1026 "PC13", "PC14", "PC15", 1027 "PC16"; 1028 function = "mmc2"; 1029 drive-strength = <30>; 1030 bias-pull-up; 1031 }; 1032 1033 uart0_ph_pins: uart0-ph-pins { 1034 pins = "PH12", "PH13"; 1035 function = "uart0"; 1036 }; 1037 1038 uart4_pins: uart4-pins { 1039 pins = "PG12", "PG13", "PG14", "PG15"; 1040 function = "uart4"; 1041 }; 1042 }; 1043 1044 uart0: serial@7000000 { 1045 compatible = "snps,dw-apb-uart"; 1046 reg = <0x07000000 0x400>; 1047 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 1048 reg-shift = <2>; 1049 reg-io-width = <4>; 1050 clocks = <&ccu CLK_BUS_UART0>; 1051 resets = <&ccu RST_BUS_UART0>; 1052 status = "disabled"; 1053 }; 1054 1055 uart1: serial@7000400 { 1056 compatible = "snps,dw-apb-uart"; 1057 reg = <0x07000400 0x400>; 1058 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 1059 reg-shift = <2>; 1060 reg-io-width = <4>; 1061 clocks = <&ccu CLK_BUS_UART1>; 1062 resets = <&ccu RST_BUS_UART1>; 1063 status = "disabled"; 1064 }; 1065 1066 uart2: serial@7000800 { 1067 compatible = "snps,dw-apb-uart"; 1068 reg = <0x07000800 0x400>; 1069 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 1070 reg-shift = <2>; 1071 reg-io-width = <4>; 1072 clocks = <&ccu CLK_BUS_UART2>; 1073 resets = <&ccu RST_BUS_UART2>; 1074 status = "disabled"; 1075 }; 1076 1077 uart3: serial@7000c00 { 1078 compatible = "snps,dw-apb-uart"; 1079 reg = <0x07000c00 0x400>; 1080 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; 1081 reg-shift = <2>; 1082 reg-io-width = <4>; 1083 clocks = <&ccu CLK_BUS_UART3>; 1084 resets = <&ccu RST_BUS_UART3>; 1085 status = "disabled"; 1086 }; 1087 1088 uart4: serial@7001000 { 1089 compatible = "snps,dw-apb-uart"; 1090 reg = <0x07001000 0x400>; 1091 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 1092 reg-shift = <2>; 1093 reg-io-width = <4>; 1094 clocks = <&ccu CLK_BUS_UART4>; 1095 resets = <&ccu RST_BUS_UART4>; 1096 status = "disabled"; 1097 }; 1098 1099 uart5: serial@7001400 { 1100 compatible = "snps,dw-apb-uart"; 1101 reg = <0x07001400 0x400>; 1102 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; 1103 reg-shift = <2>; 1104 reg-io-width = <4>; 1105 clocks = <&ccu CLK_BUS_UART5>; 1106 resets = <&ccu RST_BUS_UART5>; 1107 status = "disabled"; 1108 }; 1109 1110 i2c0: i2c@7002800 { 1111 compatible = "allwinner,sun6i-a31-i2c"; 1112 reg = <0x07002800 0x400>; 1113 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 1114 clocks = <&ccu CLK_BUS_I2C0>; 1115 resets = <&ccu RST_BUS_I2C0>; 1116 status = "disabled"; 1117 #address-cells = <1>; 1118 #size-cells = <0>; 1119 }; 1120 1121 i2c1: i2c@7002c00 { 1122 compatible = "allwinner,sun6i-a31-i2c"; 1123 reg = <0x07002c00 0x400>; 1124 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1125 clocks = <&ccu CLK_BUS_I2C1>; 1126 resets = <&ccu RST_BUS_I2C1>; 1127 status = "disabled"; 1128 #address-cells = <1>; 1129 #size-cells = <0>; 1130 }; 1131 1132 i2c2: i2c@7003000 { 1133 compatible = "allwinner,sun6i-a31-i2c"; 1134 reg = <0x07003000 0x400>; 1135 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 1136 clocks = <&ccu CLK_BUS_I2C2>; 1137 resets = <&ccu RST_BUS_I2C2>; 1138 status = "disabled"; 1139 #address-cells = <1>; 1140 #size-cells = <0>; 1141 }; 1142 1143 i2c3: i2c@7003400 { 1144 compatible = "allwinner,sun6i-a31-i2c"; 1145 reg = <0x07003400 0x400>; 1146 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1147 clocks = <&ccu CLK_BUS_I2C3>; 1148 resets = <&ccu RST_BUS_I2C3>; 1149 status = "disabled"; 1150 #address-cells = <1>; 1151 #size-cells = <0>; 1152 }; 1153 1154 i2c4: i2c@7003800 { 1155 compatible = "allwinner,sun6i-a31-i2c"; 1156 reg = <0x07003800 0x400>; 1157 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1158 clocks = <&ccu CLK_BUS_I2C4>; 1159 resets = <&ccu RST_BUS_I2C4>; 1160 status = "disabled"; 1161 #address-cells = <1>; 1162 #size-cells = <0>; 1163 }; 1164 1165 r_wdt: watchdog@8001000 { 1166 compatible = "allwinner,sun6i-a31-wdt"; 1167 reg = <0x08001000 0x20>; 1168 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 1169 clocks = <&osc24M>; 1170 }; 1171 1172 prcm@8001400 { 1173 compatible = "allwinner,sun9i-a80-prcm"; 1174 reg = <0x08001400 0x200>; 1175 }; 1176 1177 apbs_rst: reset@80014b0 { 1178 reg = <0x080014b0 0x4>; 1179 compatible = "allwinner,sun6i-a31-clock-reset"; 1180 #reset-cells = <1>; 1181 }; 1182 1183 nmi_intc: interrupt-controller@80015a0 { 1184 compatible = "allwinner,sun9i-a80-nmi"; 1185 interrupt-controller; 1186 #interrupt-cells = <2>; 1187 reg = <0x080015a0 0xc>; 1188 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 1189 }; 1190 1191 r_ir: ir@8002000 { 1192 compatible = "allwinner,sun6i-a31-ir"; 1193 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 1194 pinctrl-names = "default"; 1195 pinctrl-0 = <&r_ir_pins>; 1196 clocks = <&apbs_gates 1>, <&r_ir_clk>; 1197 clock-names = "apb", "ir"; 1198 resets = <&apbs_rst 1>; 1199 reg = <0x08002000 0x40>; 1200 status = "disabled"; 1201 }; 1202 1203 r_uart: serial@8002800 { 1204 compatible = "snps,dw-apb-uart"; 1205 reg = <0x08002800 0x400>; 1206 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 1207 reg-shift = <2>; 1208 reg-io-width = <4>; 1209 clocks = <&apbs_gates 4>; 1210 resets = <&apbs_rst 4>; 1211 status = "disabled"; 1212 }; 1213 1214 r_pio: pinctrl@8002c00 { 1215 compatible = "allwinner,sun9i-a80-r-pinctrl"; 1216 reg = <0x08002c00 0x400>; 1217 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, 1218 <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; 1219 clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; 1220 clock-names = "apb", "hosc", "losc"; 1221 gpio-controller; 1222 interrupt-controller; 1223 #interrupt-cells = <3>; 1224 #gpio-cells = <3>; 1225 1226 r_ir_pins: r-ir-pins { 1227 pins = "PL6"; 1228 function = "s_cir_rx"; 1229 }; 1230 1231 r_rsb_pins: r-rsb-pins { 1232 pins = "PN0", "PN1"; 1233 function = "s_rsb"; 1234 drive-strength = <20>; 1235 bias-pull-up; 1236 }; 1237 }; 1238 1239 r_rsb: rsb@8003400 { 1240 compatible = "allwinner,sun8i-a23-rsb"; 1241 reg = <0x08003400 0x400>; 1242 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; 1243 clocks = <&apbs_gates 3>; 1244 clock-frequency = <3000000>; 1245 resets = <&apbs_rst 3>; 1246 pinctrl-names = "default"; 1247 pinctrl-0 = <&r_rsb_pins>; 1248 status = "disabled"; 1249 #address-cells = <1>; 1250 #size-cells = <0>; 1251 }; 1252 }; 1253}; 1254