xref: /freebsd/sys/contrib/device-tree/src/arm/allwinner/sun7i-a20-lamobo-r1.dts (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c) 
1/*
2 * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/interrupt-controller/irq.h>
49
50/ {
51	model = "Lamobo R1";
52	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
53
54	aliases {
55		serial0 = &uart0;
56		serial1 = &uart3;
57		serial2 = &uart7;
58	};
59
60	chosen {
61		stdout-path = "serial0:115200n8";
62	};
63
64	hdmi-connector {
65		compatible = "hdmi-connector";
66		type = "a";
67
68		port {
69			hdmi_con_in: endpoint {
70				remote-endpoint = <&hdmi_out_con>;
71			};
72		};
73	};
74
75	leds {
76		compatible = "gpio-leds";
77
78		led {
79			label = "lamobo_r1:green:usr";
80			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
81		};
82	};
83
84	reg_gmac_3v3: gmac-3v3 {
85		compatible = "regulator-fixed";
86		regulator-name = "gmac-3v3";
87		regulator-min-microvolt = <3300000>;
88		regulator-max-microvolt = <3300000>;
89		startup-delay-us = <100000>;
90		enable-active-high;
91		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
92	};
93};
94
95&ahci {
96	target-supply = <&reg_ahci_5v>;
97	status = "okay";
98};
99
100&codec {
101	status = "okay";
102};
103
104&cpu0 {
105	cpu-supply = <&reg_dcdc2>;
106};
107
108&de {
109	status = "okay";
110};
111
112&ehci0 {
113	status = "okay";
114};
115
116&ehci1 {
117	status = "okay";
118};
119
120&gmac {
121	pinctrl-names = "default";
122	pinctrl-0 = <&gmac_rgmii_pins>;
123	phy-mode = "rgmii";
124	phy-supply = <&reg_gmac_3v3>;
125	status = "okay";
126
127	fixed-link {
128		speed = <1000>;
129		full-duplex;
130	};
131
132	mdio {
133		compatible = "snps,dwmac-mdio";
134		#address-cells = <1>;
135		#size-cells = <0>;
136
137		switch: ethernet-switch@1e {
138			compatible = "brcm,bcm53125";
139			reg = <30>;
140
141			ports {
142				#address-cells = <1>;
143				#size-cells = <0>;
144
145				port0: port@0 {
146					reg = <0>;
147					label = "lan2";
148				};
149
150				port1: port@1 {
151					reg = <1>;
152					label = "lan3";
153				};
154
155				port2: port@2 {
156					reg = <2>;
157					label = "lan4";
158				};
159
160				port3: port@3 {
161					reg = <3>;
162					label = "wan";
163				};
164
165				port4: port@4 {
166					reg = <4>;
167					label = "lan1";
168				};
169
170				port8: port@8 {
171					reg = <8>;
172					label = "cpu";
173					ethernet = <&gmac>;
174					phy-mode = "rgmii-txid";
175					fixed-link {
176						speed = <1000>;
177						full-duplex;
178					};
179				};
180			};
181		};
182	};
183};
184
185&hdmi {
186	status = "okay";
187};
188
189&hdmi_out {
190	hdmi_out_con: endpoint {
191		remote-endpoint = <&hdmi_con_in>;
192	};
193};
194
195&i2c0 {
196	status = "okay";
197
198	axp209: pmic@34 {
199		reg = <0x34>;
200		interrupt-parent = <&nmi_intc>;
201		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
202	};
203};
204
205&i2c2 {
206	status = "okay";
207};
208
209&ir0 {
210	pinctrl-names = "default";
211	pinctrl-0 = <&ir0_rx_pin>;
212	status = "okay";
213};
214
215&mmc0 {
216	vmmc-supply = <&reg_vcc3v3>;
217	bus-width = <4>;
218	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
219	status = "okay";
220};
221
222&ohci0 {
223	status = "okay";
224};
225
226&otg_sram {
227	status = "okay";
228};
229
230#include "axp209.dtsi"
231
232&ac_power_supply {
233	status = "okay";
234};
235
236&battery_power_supply {
237	status = "okay";
238};
239
240&reg_ahci_5v {
241	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
242	status = "okay";
243};
244
245&reg_dcdc2 {
246	regulator-always-on;
247	regulator-min-microvolt = <1000000>;
248	regulator-max-microvolt = <1400000>;
249	regulator-name = "vdd-cpu";
250};
251
252&reg_dcdc3 {
253	regulator-always-on;
254	regulator-min-microvolt = <1000000>;
255	regulator-max-microvolt = <1400000>;
256	regulator-name = "vdd-int-dll";
257};
258
259&reg_ldo1 {
260	regulator-name = "vdd-rtc";
261};
262
263&reg_ldo2 {
264	regulator-always-on;
265	regulator-min-microvolt = <3000000>;
266	regulator-max-microvolt = <3000000>;
267	regulator-name = "avcc";
268};
269
270&reg_usb0_vbus {
271	status = "okay";
272};
273
274&reg_usb2_vbus {
275	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
276	status = "okay";
277};
278
279&spi0 {
280	pinctrl-names = "default";
281	pinctrl-0 = <&spi0_pi_pins>,
282		    <&spi0_cs0_pi_pin>,
283		    <&spi0_cs1_pi_pin>;
284	status = "okay";
285};
286
287&uart0 {
288	pinctrl-names = "default";
289	pinctrl-0 = <&uart0_pb_pins>;
290	status = "okay";
291};
292
293&uart3 {
294	pinctrl-names = "default";
295	pinctrl-0 = <&uart3_ph_pins>;
296	status = "okay";
297};
298
299&uart7 {
300	pinctrl-names = "default";
301	pinctrl-0 = <&uart7_pi_pins>;
302	status = "okay";
303};
304
305&usb_otg {
306	dr_mode = "otg";
307	status = "okay";
308};
309
310&usb_power_supply {
311	status = "okay";
312};
313
314&usbphy {
315	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
316	usb0_vbus_power-supply = <&usb_power_supply>;
317	usb0_vbus-supply = <&reg_usb0_vbus>;
318	usb2_vbus-supply = <&reg_usb2_vbus>;
319	status = "okay";
320};
321