1/* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun7i-a20.dtsi" 45#include "sunxi-common-regulators.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47#include <dt-bindings/interrupt-controller/arm-gic.h> 48 49/ { 50 model = "LeMaker Banana Pro"; 51 compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; 52 53 aliases { 54 serial0 = &uart0; 55 serial1 = &uart4; 56 serial2 = &uart7; 57 }; 58 59 chosen { 60 stdout-path = "serial0:115200n8"; 61 }; 62 63 leds { 64 compatible = "gpio-leds"; 65 66 led-0 { 67 label = "bananapro:blue:usr"; 68 gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; 69 }; 70 71 led-1 { 72 label = "bananapro:green:usr"; 73 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; 74 }; 75 }; 76 77 wifi_pwrseq: wifi-pwrseq { 78 compatible = "mmc-pwrseq-simple"; 79 reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; 80 }; 81 82 reg_gmac_3v3: gmac-3v3 { 83 compatible = "regulator-fixed"; 84 regulator-name = "gmac-3v3"; 85 regulator-min-microvolt = <3300000>; 86 regulator-max-microvolt = <3300000>; 87 startup-delay-us = <100000>; 88 enable-active-high; 89 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; 90 }; 91}; 92 93&ahci { 94 status = "okay"; 95}; 96 97&codec { 98 status = "okay"; 99}; 100 101&ehci0 { 102 status = "okay"; 103}; 104 105&ehci1 { 106 status = "okay"; 107}; 108 109&gmac { 110 pinctrl-names = "default"; 111 pinctrl-0 = <&gmac_rgmii_pins>; 112 phy-handle = <&phy1>; 113 phy-mode = "rgmii-id"; 114 phy-supply = <®_gmac_3v3>; 115 status = "okay"; 116}; 117 118&i2c0 { 119 status = "okay"; 120 121 axp209: pmic@34 { 122 compatible = "x-powers,axp209"; 123 reg = <0x34>; 124 interrupt-parent = <&nmi_intc>; 125 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 126 127 interrupt-controller; 128 #interrupt-cells = <1>; 129 }; 130}; 131 132&i2c2 { 133 status = "okay"; 134}; 135 136&ir0 { 137 pinctrl-names = "default"; 138 pinctrl-0 = <&ir0_rx_pin>; 139 status = "okay"; 140}; 141 142&gmac_mdio { 143 phy1: ethernet-phy@1 { 144 reg = <1>; 145 }; 146}; 147 148&mmc0 { 149 vmmc-supply = <®_vcc3v3>; 150 bus-width = <4>; 151 cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ 152 status = "okay"; 153}; 154 155&mmc3 { 156 vmmc-supply = <®_vcc3v3>; 157 mmc-pwrseq = <&wifi_pwrseq>; 158 bus-width = <4>; 159 non-removable; 160 status = "okay"; 161 162 brcmf: wifi@1 { 163 reg = <1>; 164 compatible = "brcm,bcm4329-fmac"; 165 interrupt-parent = <&pio>; 166 interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; 167 interrupt-names = "host-wake"; 168 }; 169}; 170 171&ohci0 { 172 status = "okay"; 173}; 174 175&ohci1 { 176 status = "okay"; 177}; 178 179®_usb1_vbus { 180 gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ 181 status = "okay"; 182}; 183 184®_usb2_vbus { 185 gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ 186 status = "okay"; 187}; 188 189&spi0 { 190 pinctrl-names = "default"; 191 pinctrl-0 = <&spi0_pi_pins>, 192 <&spi0_cs0_pi_pin>, 193 <&spi0_cs1_pi_pin>; 194 status = "okay"; 195}; 196 197&uart0 { 198 pinctrl-names = "default"; 199 pinctrl-0 = <&uart0_pb_pins>; 200 status = "okay"; 201}; 202 203&uart4 { 204 pinctrl-names = "default"; 205 pinctrl-0 = <&uart4_ph_pins>; 206 status = "okay"; 207}; 208 209&uart7 { 210 pinctrl-names = "default"; 211 pinctrl-0 = <&uart7_pi_pins>; 212 status = "okay"; 213}; 214 215&usbphy { 216 usb1_vbus-supply = <®_usb1_vbus>; 217 usb2_vbus-supply = <®_usb2_vbus>; 218 status = "okay"; 219}; 220