1/* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun5i-a10s.dtsi" 45#include "sunxi-common-regulators.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47 48/ { 49 model = "Auxtek t004 A10s hdmi tv-stick"; 50 compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s"; 51 52 aliases { 53 serial0 = &uart0; 54 }; 55 56 chosen { 57 stdout-path = "serial0:115200n8"; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 pinctrl-names = "default"; 63 pinctrl-0 = <&led_pins_t004>; 64 65 led { 66 label = "t004-tv-dongle:red:usr"; 67 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ 68 default-state = "on"; 69 }; 70 }; 71 72 reg_vmmc1: vmmc1 { 73 compatible = "regulator-fixed"; 74 regulator-name = "vmmc1"; 75 regulator-min-microvolt = <3300000>; 76 regulator-max-microvolt = <3300000>; 77 enable-active-high; 78 gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */ 79 }; 80}; 81 82&ehci0 { 83 status = "okay"; 84}; 85 86&i2c0 { 87 status = "okay"; 88 89 axp152: pmic@30 { 90 compatible = "x-powers,axp152"; 91 reg = <0x30>; 92 interrupts = <0>; 93 interrupt-controller; 94 #interrupt-cells = <1>; 95 }; 96}; 97 98&mmc0 { 99 vmmc-supply = <®_vcc3v3>; 100 bus-width = <4>; 101 cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ 102 status = "okay"; 103}; 104 105&mmc1 { 106 vmmc-supply = <®_vmmc1>; 107 bus-width = <4>; 108 non-removable; 109 cap-sdio-irq; 110 status = "okay"; 111}; 112 113&ohci0 { 114 status = "okay"; 115}; 116 117&otg_sram { 118 status = "okay"; 119}; 120 121&pio { 122 led_pins_t004: led-pin { 123 pins = "PB2"; 124 function = "gpio_out"; 125 drive-strength = <20>; 126 }; 127}; 128 129®_usb1_vbus { 130 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ 131 status = "okay"; 132}; 133 134&uart0 { 135 pinctrl-names = "default"; 136 pinctrl-0 = <&uart0_pb_pins>; 137 status = "okay"; 138}; 139 140&usb_otg { 141 dr_mode = "otg"; 142 status = "okay"; 143}; 144 145&usbphy { 146 usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ 147 usb1_vbus-supply = <®_usb1_vbus>; 148 status = "okay"; 149}; 150