1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/watchdog/ti,rti-wdt.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Texas Instruments K3 SoC Watchdog Timer 8 9maintainers: 10 - Tero Kristo <t-kristo@ti.com> 11 12description: 13 The TI K3 SoC watchdog timer is implemented via the RTI (Real Time 14 Interrupt) IP module. This timer adds a support for windowed watchdog 15 mode, which will signal an error if it is pinged outside the watchdog 16 time window, meaning either too early or too late. The error signal 17 generated can be routed to either interrupt a safety controller or 18 to directly reset the SoC. 19 20allOf: 21 - $ref: watchdog.yaml# 22 23properties: 24 compatible: 25 enum: 26 - ti,j7-rti-wdt 27 28 reg: 29 maxItems: 1 30 31 clocks: 32 maxItems: 1 33 34 power-domains: 35 maxItems: 1 36 37 memory-region: 38 maxItems: 1 39 description: 40 Contains the watchdog reserved memory. It is optional. 41 In the reserved memory, the specified values, which are 42 PON_REASON_SOF_NUM(0xBBBBCCCC), PON_REASON_MAGIC_NUM(0xDDDDDDDD), 43 and PON_REASON_EOF_NUM(0xCCCCBBBB), are pre-stored at the first 44 3 * 4 bytes to tell that last boot was caused by watchdog reset. 45 Once the PON reason is captured by driver(rti_wdt.c), the driver 46 is supposed to wipe the whole memory region. Surely, if this 47 property is set, at least 12 bytes reserved memory starting from 48 specific memory address(0xa220000) should be set. More please 49 refer to example. 50 51required: 52 - compatible 53 - reg 54 - clocks 55 - power-domains 56 57unevaluatedProperties: false 58 59examples: 60 - | 61 /* 62 * RTI WDT in main domain on J721e SoC. Assigned clocks are used to 63 * select the source clock for the watchdog, forcing it to tick with 64 * a 32kHz clock in this case. Add a reserved memory(optional) to keep 65 * the watchdog reset cause persistent, which was be written in 12 bytes 66 * starting from 0xa2200000 by RTI Watchdog Firmware, then make it 67 * possible to get watchdog reset cause in driver. 68 * 69 * Reserved memory should be defined as follows: 70 * reserved-memory { 71 * wdt_reset_memory_region: wdt-memory@a2200000 { 72 * reg = <0x00 0xa2200000 0x00 0x1000>; 73 * no-map; 74 * }; 75 * } 76 */ 77 #include <dt-bindings/soc/ti,sci_pm_domain.h> 78 79 watchdog@2200000 { 80 compatible = "ti,j7-rti-wdt"; 81 reg = <0x2200000 0x100>; 82 clocks = <&k3_clks 252 1>; 83 power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>; 84 assigned-clocks = <&k3_clks 252 1>; 85 assigned-clock-parents = <&k3_clks 252 5>; 86 memory-region = <&wdt_reset_memory_region>; 87 }; 88