1Ux500 MUSB 2 3Required properties: 4 - compatible : Should be "stericsson,db8500-musb" 5 - reg : Offset and length of registers 6 - interrupts : Interrupt; mode, number and trigger 7 - dr_mode : Dual-role; either host mode "host", peripheral mode "peripheral" 8 or both "otg" 9 10Optional properties: 11 - dmas : A list of dma channels; 12 dma-controller, event-line, fixed-channel, flags 13 - dma-names : An ordered list of channel names affiliated to the above 14 15Example: 16 17usb_per5@a03e0000 { 18 compatible = "stericsson,db8500-musb"; 19 reg = <0xa03e0000 0x10000>; 20 interrupts = <0 23 0x4>; 21 interrupt-names = "mc"; 22 23 dr_mode = "otg"; 24 25 dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */ 26 <&dma 38 0 0x0>, /* Logical - MemToDev */ 27 <&dma 37 0 0x2>, /* Logical - DevToMem */ 28 <&dma 37 0 0x0>, /* Logical - MemToDev */ 29 <&dma 36 0 0x2>, /* Logical - DevToMem */ 30 <&dma 36 0 0x0>, /* Logical - MemToDev */ 31 <&dma 19 0 0x2>, /* Logical - DevToMem */ 32 <&dma 19 0 0x0>, /* Logical - MemToDev */ 33 <&dma 18 0 0x2>, /* Logical - DevToMem */ 34 <&dma 18 0 0x0>, /* Logical - MemToDev */ 35 <&dma 17 0 0x2>, /* Logical - DevToMem */ 36 <&dma 17 0 0x0>, /* Logical - MemToDev */ 37 <&dma 16 0 0x2>, /* Logical - DevToMem */ 38 <&dma 16 0 0x0>, /* Logical - MemToDev */ 39 <&dma 39 0 0x2>, /* Logical - DevToMem */ 40 <&dma 39 0 0x0>; /* Logical - MemToDev */ 41 42 dma-names = "iep_1_9", "oep_1_9", 43 "iep_2_10", "oep_2_10", 44 "iep_3_11", "oep_3_11", 45 "iep_4_12", "oep_4_12", 46 "iep_5_13", "oep_5_13", 47 "iep_6_14", "oep_6_14", 48 "iep_7_15", "oep_7_15", 49 "iep_8", "oep_8"; 50}; 51