xref: /freebsd/sys/contrib/device-tree/Bindings/usb/fsl,imx8qm-cdns3.yaml (revision f126890ac5386406dadf7c4cfa9566cbb56537c5) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (c) 2020 NXP
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: NXP iMX8QM Soc USB Controller
9
10maintainers:
11  - Frank Li <Frank.Li@nxp.com>
12
13properties:
14  compatible:
15    const: fsl,imx8qm-usb3
16
17  reg:
18    items:
19      - description: Register set for iMX USB3 Platform Control
20
21  "#address-cells":
22    enum: [ 1, 2 ]
23
24  "#size-cells":
25    enum: [ 1, 2 ]
26
27  ranges: true
28
29  clocks:
30    items:
31      - description: Standby clock. Used during ultra low power states.
32      - description: USB bus clock for usb3 controller.
33      - description: AXI clock for AXI interface.
34      - description: ipg clock for register access.
35      - description: Core clock for usb3 controller.
36
37  clock-names:
38    items:
39      - const: lpm
40      - const: bus
41      - const: aclk
42      - const: ipg
43      - const: core
44
45  power-domains:
46    maxItems: 1
47
48# Required child node:
49
50patternProperties:
51  "^usb@[0-9a-f]+$":
52    $ref: cdns,usb3.yaml#
53
54required:
55  - compatible
56  - reg
57  - "#address-cells"
58  - "#size-cells"
59  - ranges
60  - clocks
61  - clock-names
62  - power-domains
63
64additionalProperties: false
65
66examples:
67  - |
68    #include <dt-bindings/clock/imx8-lpcg.h>
69    #include <dt-bindings/firmware/imx/rsrc.h>
70    #include <dt-bindings/interrupt-controller/arm-gic.h>
71
72    usb@5b110000 {
73      compatible = "fsl,imx8qm-usb3";
74      reg = <0x5b110000 0x10000>;
75      ranges;
76      clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
77               <&usb3_lpcg IMX_LPCG_CLK_0>,
78               <&usb3_lpcg IMX_LPCG_CLK_7>,
79               <&usb3_lpcg IMX_LPCG_CLK_4>,
80               <&usb3_lpcg IMX_LPCG_CLK_5>;
81      clock-names = "lpm", "bus", "aclk", "ipg", "core";
82      assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
83      assigned-clock-rates = <250000000>;
84      power-domains = <&pd IMX_SC_R_USB_2>;
85      #address-cells = <1>;
86      #size-cells = <1>;
87
88      usb@5b120000 {
89        compatible = "cdns,usb3";
90        reg = <0x5b120000 0x10000>,   /* memory area for OTG/DRD registers */
91              <0x5b130000 0x10000>,   /* memory area for HOST registers */
92              <0x5b140000 0x10000>;   /* memory area for DEVICE registers */
93        reg-names = "otg", "xhci", "dev";
94        interrupt-parent = <&gic>;
95        interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
96                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
97                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
98                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
99        interrupt-names = "host", "peripheral", "otg", "wakeup";
100        phys = <&usb3_phy>;
101        phy-names = "cdns3,usb3-phy";
102      };
103    };
104