1OMAP HS USB EHCI controller 2 3This device is usually the child of the omap-usb-host 4Documentation/devicetree/bindings/mfd/omap-usb-host.txt 5 6Required properties: 7 8- compatible: should be "ti,ehci-omap" 9- reg: should contain one register range i.e. start and length 10- interrupts: description of the interrupt line 11 12Optional properties: 13 14- phys: list of phandles to PHY nodes. 15 This property is required if at least one of the ports are in 16 PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY 17 18To specify the port mode, see 19Documentation/devicetree/bindings/mfd/omap-usb-host.txt 20 21Example for OMAP4: 22 23usbhsehci: ehci@4a064c00 { 24 compatible = "ti,ehci-omap"; 25 reg = <0x4a064c00 0x400>; 26 interrupts = <0 77 0x4>; 27}; 28 29&usbhsehci { 30 phys = <&hsusb1_phy 0 &hsusb3_phy>; 31}; 32