1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm QPNP PMIC Temperature Alarm 8 9maintainers: 10 - Bjorn Andersson <bjorn.andersson@linaro.org> 11 12description: 13 QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips 14 that utilize the Qualcomm SPMI implementation. These peripherals provide an 15 interrupt signal and status register to identify high PMIC die temperature. 16 17allOf: 18 - $ref: thermal-sensor.yaml# 19 20properties: 21 compatible: 22 const: qcom,spmi-temp-alarm 23 24 reg: 25 maxItems: 1 26 27 interrupts: 28 maxItems: 1 29 30 io-channels: 31 items: 32 - description: ADC channel, which reports chip die temperature 33 34 io-channel-names: 35 items: 36 - const: thermal 37 38 '#thermal-sensor-cells': 39 const: 0 40 41required: 42 - compatible 43 - reg 44 - interrupts 45 - '#thermal-sensor-cells' 46 47additionalProperties: false 48 49examples: 50 - | 51 #include <dt-bindings/interrupt-controller/arm-gic.h> 52 53 pmic { 54 #address-cells = <1>; 55 #size-cells = <0>; 56 57 pm8350_temp_alarm: temperature-sensor@a00 { 58 compatible = "qcom,spmi-temp-alarm"; 59 reg = <0xa00>; 60 interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; 61 #thermal-sensor-cells = <0>; 62 }; 63 }; 64 65 thermal-zones { 66 pm8350_thermal: pm8350c-thermal { 67 polling-delay-passive = <100>; 68 polling-delay = <0>; 69 thermal-sensors = <&pm8350_temp_alarm>; 70 71 trips { 72 pm8350_trip0: trip0 { 73 temperature = <95000>; 74 hysteresis = <0>; 75 type = "passive"; 76 }; 77 78 pm8350_crit: pm8350c-crit { 79 temperature = <115000>; 80 hysteresis = <0>; 81 type = "critical"; 82 }; 83 }; 84 }; 85 }; 86