1* Marvell Armada 370/375/380/XP thermal management 2 3Required properties: 4 5- compatible: Should be set to one of the following: 6 * marvell,armada370-thermal 7 * marvell,armada375-thermal 8 * marvell,armada380-thermal 9 * marvell,armadaxp-thermal 10 * marvell,armada-ap806-thermal 11 * marvell,armada-ap807-thermal 12 * marvell,armada-cp110-thermal 13 14Note: these bindings are deprecated for AP806/CP110 and should instead 15follow the rules described in: 16Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt 17Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt 18 19- reg: Device's register space. 20 Two entries are expected, see the examples below. The first one points 21 to the status register (4B). The second one points to the control 22 registers (8B). 23 Note: The compatibles marvell,armada370-thermal, 24 marvell,armada380-thermal, and marvell,armadaxp-thermal must point to 25 "control MSB/control 1", with size of 4 (deprecated binding), or point 26 to "control LSB/control 0" with size of 8 (current binding). All other 27 compatibles must point to "control LSB/control 0" with size of 8. 28 29Examples: 30 31 /* Legacy bindings */ 32 thermal@d0018300 { 33 compatible = "marvell,armada370-thermal"; 34 reg = <0xd0018300 0x4 35 0xd0018304 0x4>; 36 }; 37 38 ap_thermal: thermal@6f8084 { 39 compatible = "marvell,armada-ap806-thermal"; 40 reg = <0x6f808C 0x4>, 41 <0x6f8084 0x8>; 42 }; 43