1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/spi/spi-pl022.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ARM PL022 SPI controller 8 9maintainers: 10 - Linus Walleij <linus.walleij@linaro.org> 11 12allOf: 13 - $ref: "spi-controller.yaml#" 14 15# We need a select here so we don't match all nodes with 'arm,primecell' 16select: 17 properties: 18 compatible: 19 contains: 20 const: arm,pl022 21 required: 22 - compatible 23 24properties: 25 compatible: 26 items: 27 - const: arm,pl022 28 - const: arm,primecell 29 30 reg: 31 maxItems: 1 32 33 interrupts: 34 maxItems: 1 35 36 clocks: 37 maxItems: 2 38 39 clock-names: 40 items: 41 - const: sspclk 42 - const: apb_pclk 43 44 pl022,autosuspend-delay: 45 description: delay in ms following transfer completion before the 46 runtime power management system suspends the device. A setting of 0 47 indicates no delay and the device will be suspended immediately. 48 $ref: "/schemas/types.yaml#/definitions/uint32" 49 50 pl022,rt: 51 description: indicates the controller should run the message pump with realtime 52 priority to minimise the transfer latency on the bus (boolean) 53 type: boolean 54 55 dmas: 56 description: 57 Two or more DMA channel specifiers following the convention outlined 58 in bindings/dma/dma.txt 59 minItems: 2 60 maxItems: 32 61 62 dma-names: 63 description: 64 There must be at least one channel named "tx" for transmit and named "rx" 65 for receive. 66 minItems: 2 67 maxItems: 32 68 additionalItems: true 69 items: 70 - const: rx 71 - const: tx 72 73 resets: 74 maxItems: 1 75 76patternProperties: 77 "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$": 78 type: object 79 # SPI slave nodes must be children of the SPI master node and can 80 # contain the following properties. 81 properties: 82 pl022,interface: 83 description: SPI interface type 84 $ref: "/schemas/types.yaml#/definitions/uint32" 85 enum: 86 - 0 # SPI 87 - 1 # Texas Instruments Synchronous Serial Frame Format 88 - 2 # Microwire (Half Duplex) 89 90 pl022,com-mode: 91 description: Specifies the transfer mode 92 $ref: "/schemas/types.yaml#/definitions/uint32" 93 enum: 94 - 0 # interrupt mode 95 - 1 # polling mode 96 - 2 # DMA mode 97 default: 1 98 99 pl022,rx-level-trig: 100 description: Rx FIFO watermark level 101 $ref: "/schemas/types.yaml#/definitions/uint32" 102 minimum: 0 103 maximum: 4 104 105 pl022,tx-level-trig: 106 description: Tx FIFO watermark level 107 $ref: "/schemas/types.yaml#/definitions/uint32" 108 minimum: 0 109 maximum: 4 110 111 pl022,ctrl-len: 112 description: Microwire interface - Control length 113 $ref: "/schemas/types.yaml#/definitions/uint32" 114 minimum: 0x03 115 maximum: 0x1f 116 117 pl022,wait-state: 118 description: Microwire interface - Wait state 119 $ref: "/schemas/types.yaml#/definitions/uint32" 120 enum: [0, 1] 121 122 pl022,duplex: 123 description: Microwire interface - Full/Half duplex 124 $ref: "/schemas/types.yaml#/definitions/uint32" 125 enum: [0, 1] 126 127required: 128 - compatible 129 - reg 130 - interrupts 131 132unevaluatedProperties: false 133 134examples: 135 - | 136 spi@e0100000 { 137 compatible = "arm,pl022", "arm,primecell"; 138 reg = <0xe0100000 0x1000>; 139 #address-cells = <1>; 140 #size-cells = <0>; 141 interrupts = <0 31 0x4>; 142 dmas = <&dma_controller 23 1>, 143 <&dma_controller 24 0>; 144 dma-names = "rx", "tx"; 145 146 flash@1 { 147 compatible = "st,m25p80"; 148 reg = <1>; 149 spi-max-frequency = <12000000>; 150 spi-cpol; 151 spi-cpha; 152 pl022,interface = <0>; 153 pl022,com-mode = <0x2>; 154 pl022,rx-level-trig = <0>; 155 pl022,tx-level-trig = <0>; 156 pl022,ctrl-len = <0x11>; 157 pl022,wait-state = <0>; 158 pl022,duplex = <0>; 159 }; 160 }; 161... 162