xref: /freebsd/sys/contrib/device-tree/Bindings/spi/samsung,spi.yaml (revision 6580f5c38dd5b01aeeaed16b370f1a12423437f0) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/samsung,spi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung S3C/S5P/Exynos SoC SPI controller
8
9maintainers:
10  - Krzysztof Kozlowski <krzk@kernel.org>
11
12description:
13  All the SPI controller nodes should be represented in the aliases node using
14  the following format 'spi{n}' where n is a unique number for the alias.
15
16properties:
17  compatible:
18    oneOf:
19      - enum:
20          - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
21          - samsung,s3c6410-spi
22          - samsung,s5pv210-spi # for S5PV210 and S5PC110
23          - samsung,exynos4210-spi
24          - samsung,exynos5433-spi
25          - samsung,exynosautov9-spi
26          - tesla,fsd-spi
27      - const: samsung,exynos7-spi
28        deprecated: true
29
30  clocks:
31    minItems: 2
32    maxItems: 3
33
34  clock-names:
35    minItems: 2
36    maxItems: 3
37
38  dmas:
39    minItems: 2
40    maxItems: 2
41
42  dma-names:
43    items:
44      - const: tx
45      - const: rx
46
47  interrupts:
48    maxItems: 1
49
50  no-cs-readback:
51    description:
52      The CS line is disconnected, therefore the device should not operate
53      based on CS signalling.
54    type: boolean
55
56  num-cs:
57    minimum: 1
58    maximum: 4
59    default: 1
60
61  samsung,spi-src-clk:
62    description:
63      If the spi controller includes a internal clock mux to select the clock
64      source for the spi bus clock, this property can be used to indicate the
65      clock to be used for driving the spi bus clock. If not specified, the
66      clock number 0 is used as default.
67    $ref: /schemas/types.yaml#/definitions/uint32
68    default: 0
69
70  reg:
71    maxItems: 1
72
73required:
74  - compatible
75  - clocks
76  - clock-names
77  - dmas
78  - dma-names
79  - interrupts
80  - reg
81
82allOf:
83  - $ref: spi-controller.yaml#
84  - if:
85      properties:
86        compatible:
87          contains:
88            enum:
89              - samsung,exynos5433-spi
90              - samsung,exynosautov9-spi
91    then:
92      properties:
93        clocks:
94          minItems: 3
95          maxItems: 3
96        clock-names:
97          items:
98            - const: spi
99            - enum:
100                - spi_busclk0
101                - spi_busclk1
102                - spi_busclk2
103                - spi_busclk3
104            - const: spi_ioclk
105    else:
106      properties:
107        clocks:
108          minItems: 2
109          maxItems: 2
110        clock-names:
111          items:
112            - const: spi
113            - enum:
114                - spi_busclk0
115                - spi_busclk1
116                - spi_busclk2
117                - spi_busclk3
118
119unevaluatedProperties: false
120
121examples:
122  - |
123    #include <dt-bindings/clock/exynos5433.h>
124    #include <dt-bindings/clock/samsung,s2mps11.h>
125    #include <dt-bindings/interrupt-controller/arm-gic.h>
126    #include <dt-bindings/gpio/gpio.h>
127
128    spi@14d30000 {
129        compatible = "samsung,exynos5433-spi";
130        reg = <0x14d30000 0x100>;
131        interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
132        dmas = <&pdma0 11>, <&pdma0 10>;
133        dma-names = "tx", "rx";
134        #address-cells = <1>;
135        #size-cells = <0>;
136        clocks = <&cmu_peric CLK_PCLK_SPI1>,
137                 <&cmu_peric CLK_SCLK_SPI1>,
138                 <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
139        clock-names = "spi",
140                      "spi_busclk0",
141                      "spi_ioclk";
142        samsung,spi-src-clk = <0>;
143        pinctrl-names = "default";
144        pinctrl-0 = <&spi1_bus>;
145        num-cs = <1>;
146
147        cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
148
149        audio-codec@0 {
150            compatible = "wlf,wm5110";
151            reg = <0x0>;
152            spi-max-frequency = <20000000>;
153            interrupt-parent = <&gpa0>;
154            interrupts = <4 IRQ_TYPE_NONE>;
155            clocks = <&pmu_system_controller 0>,
156                     <&s2mps13_osc S2MPS11_CLK_BT>;
157            clock-names = "mclk1", "mclk2";
158
159            gpio-controller;
160            #gpio-cells = <2>;
161            interrupt-controller;
162            #interrupt-cells = <2>;
163
164            wlf,micd-detect-debounce = <300>;
165            wlf,micd-bias-start-time = <0x1>;
166            wlf,micd-rate = <0x7>;
167            wlf,micd-dbtime = <0x2>;
168            wlf,micd-force-micbias;
169            wlf,micd-configs = <0x0 1 0>;
170            wlf,hpdet-channel = <1>;
171            wlf,gpsw = <0x1>;
172            wlf,inmode = <2 0 2 0>;
173
174            wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
175            wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
176
177            /* core supplies */
178            AVDD-supply = <&ldo18_reg>;
179            DBVDD1-supply = <&ldo18_reg>;
180            CPVDD-supply = <&ldo18_reg>;
181            DBVDD2-supply = <&ldo18_reg>;
182            DBVDD3-supply = <&ldo18_reg>;
183            SPKVDDL-supply = <&ldo18_reg>;
184            SPKVDDR-supply = <&ldo18_reg>;
185
186            controller-data {
187                samsung,spi-feedback-delay = <0>;
188            };
189        };
190    };
191