xref: /freebsd/sys/contrib/device-tree/Bindings/spi/samsung,spi.yaml (revision 01950c46b8155250f64374fb72fc11faa44bf099)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/samsung,spi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung S3C/S5P/Exynos SoC SPI controller

maintainers:
  - Krzysztof Kozlowski <krzk@kernel.org>

description:
  All the SPI controller nodes should be represented in the aliases node using
  the following format 'spi{n}' where n is a unique number for the alias.

properties:
  compatible:
    oneOf:
      - enum:
          - google,gs101-spi
          - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
          - samsung,s3c6410-spi
          - samsung,s5pv210-spi # for S5PV210 and S5PC110
          - samsung,exynos4210-spi
          - samsung,exynos5433-spi
          - samsung,exynos850-spi
          - samsung,exynosautov9-spi
          - tesla,fsd-spi
      - const: samsung,exynos7-spi
        deprecated: true

  clocks:
    minItems: 2
    maxItems: 3

  clock-names:
    minItems: 2
    maxItems: 3

  dmas:
    minItems: 2
    maxItems: 2

  dma-names:
    items:
      - const: tx
      - const: rx

  interrupts:
    maxItems: 1

  no-cs-readback:
    description:
      The CS line is disconnected, therefore the device should not operate
      based on CS signalling.
    type: boolean

  num-cs:
    minimum: 1
    maximum: 4
    default: 1

  samsung,spi-src-clk:
    description:
      If the spi controller includes a internal clock mux to select the clock
      source for the spi bus clock, this property can be used to indicate the
      clock to be used for driving the spi bus clock. If not specified, the
      clock number 0 is used as default.
    $ref: /schemas/types.yaml#/definitions/uint32
    default: 0

  reg:
    maxItems: 1

required:
  - compatible
  - clocks
  - clock-names
  - interrupts
  - reg

allOf:
  - $ref: spi-controller.yaml#
  - if:
      properties:
        compatible:
          contains:
            enum:
              - samsung,exynos5433-spi
              - samsung,exynosautov9-spi
    then:
      properties:
        clocks:
          minItems: 3
          maxItems: 3
        clock-names:
          items:
            - const: spi
            - enum:
                - spi_busclk0
                - spi_busclk1
                - spi_busclk2
                - spi_busclk3
            - const: spi_ioclk
    else:
      properties:
        clocks:
          minItems: 2
          maxItems: 2
        clock-names:
          items:
            - const: spi
            - enum:
                - spi_busclk0
                - spi_busclk1
                - spi_busclk2
                - spi_busclk3

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/exynos5433.h>
    #include <dt-bindings/clock/samsung,s2mps11.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/gpio/gpio.h>

    spi@14d30000 {
        compatible = "samsung,exynos5433-spi";
        reg = <0x14d30000 0x100>;
        interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
        dmas = <&pdma0 11>, <&pdma0 10>;
        dma-names = "tx", "rx";
        #address-cells = <1>;
        #size-cells = <0>;
        clocks = <&cmu_peric CLK_PCLK_SPI1>,
                 <&cmu_peric CLK_SCLK_SPI1>,
                 <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
        clock-names = "spi",
                      "spi_busclk0",
                      "spi_ioclk";
        samsung,spi-src-clk = <0>;
        pinctrl-names = "default";
        pinctrl-0 = <&spi1_bus>;
        num-cs = <1>;

        cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;

        audio-codec@0 {
            compatible = "wlf,wm5110";
            reg = <0x0>;
            spi-max-frequency = <20000000>;
            interrupt-parent = <&gpa0>;
            interrupts = <4 IRQ_TYPE_NONE>;
            clocks = <&pmu_system_controller 0>,
                     <&s2mps13_osc S2MPS11_CLK_BT>;
            clock-names = "mclk1", "mclk2";

            gpio-controller;
            #gpio-cells = <2>;
            interrupt-controller;
            #interrupt-cells = <2>;

            wlf,micd-detect-debounce = <300>;
            wlf,micd-bias-start-time = <0x1>;
            wlf,micd-rate = <0x7>;
            wlf,micd-dbtime = <0x2>;
            wlf,micd-force-micbias;
            wlf,micd-configs = <0x0 1 0>;
            wlf,hpdet-channel = <1>;
            wlf,gpsw = <0x1>;
            wlf,inmode = <2 0 2 0>;

            wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
            wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;

            /* core supplies */
            AVDD-supply = <&ldo18_reg>;
            DBVDD1-supply = <&ldo18_reg>;
            CPVDD-supply = <&ldo18_reg>;
            DBVDD2-supply = <&ldo18_reg>;
            DBVDD3-supply = <&ldo18_reg>;
            SPKVDDL-supply = <&ldo18_reg>;
            SPKVDDR-supply = <&ldo18_reg>;

            controller-data {
                samsung,spi-feedback-delay = <0>;
            };
        };
    };