1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/spi/brcm,spi-bcm-qspi.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Broadcom SPI controller 8 9maintainers: 10 - Kamal Dasu <kdasu.kdev@gmail.com> 11 - Rafał Miłecki <rafal@milecki.pl> 12 13description: | 14 The Broadcom SPI controller is a SPI master found on various SOCs, including 15 BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits 16 of: 17 MSPI : SPI master controller can read and write to a SPI slave device 18 BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration 19 for flash reads and be configured to do single, double, quad lane 20 io with 3-byte and 4-byte addressing support. 21 22 Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP. 23 MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance 24 of a MSPI master without the BSPI to use with non flash slave devices that 25 use SPI protocol. 26 27allOf: 28 - $ref: spi-controller.yaml# 29 30properties: 31 compatible: 32 oneOf: 33 - description: Second Instance of MSPI BRCMSTB SoCs 34 items: 35 - enum: 36 - brcm,spi-bcm7425-qspi 37 - brcm,spi-bcm7429-qspi 38 - brcm,spi-bcm7435-qspi 39 - brcm,spi-bcm7445-qspi 40 - brcm,spi-bcm7216-qspi 41 - brcm,spi-bcm7278-qspi 42 - const: brcm,spi-bcm-qspi 43 - const: brcm,spi-brcmstb-mspi 44 - description: Second Instance of MSPI BRCMSTB SoCs 45 items: 46 - enum: 47 - brcm,spi-brcmstb-qspi 48 - brcm,spi-brcmstb-mspi 49 - brcm,spi-nsp-qspi 50 - brcm,spi-ns2-qspi 51 - const: brcm,spi-bcm-qspi 52 53 reg: 54 minItems: 1 55 maxItems: 5 56 57 reg-names: 58 minItems: 1 59 items: 60 - const: mspi 61 - const: bspi 62 - enum: [ intr_regs, intr_status_reg, cs_reg ] 63 - enum: [ intr_regs, intr_status_reg, cs_reg ] 64 - enum: [ intr_regs, intr_status_reg, cs_reg ] 65 66 interrupts: 67 minItems: 1 68 maxItems: 7 69 70 interrupt-names: 71 oneOf: 72 - minItems: 1 73 items: 74 - const: mspi_done 75 - const: mspi_halted 76 - const: spi_lr_fullness_reached 77 - const: spi_lr_session_aborted 78 - const: spi_lr_impatient 79 - const: spi_lr_session_done 80 - const: spi_lr_overread 81 - const: spi_l1_intr 82 83 clocks: 84 maxItems: 1 85 description: reference clock for this block 86 87 native-endian: 88 $ref: /schemas/types.yaml#/definitions/flag 89 description: Defined when using BE SoC and device uses BE register read/write 90 91unevaluatedProperties: false 92 93required: 94 - reg 95 - reg-names 96 - interrupts 97 - interrupt-names 98 99examples: 100 - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access 101 spi@f03e3400 { 102 compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi"; 103 reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>; 104 reg-names = "mspi", "bspi", "cs_reg"; 105 interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>; 106 interrupt-parent = <&gic>; 107 interrupt-names = "mspi_done", 108 "mspi_halted", 109 "spi_lr_fullness_reached", 110 "spi_lr_session_aborted", 111 "spi_lr_impatient", 112 "spi_lr_session_done", 113 "spi_lr_overread"; 114 clocks = <&hif_spi>; 115 #address-cells = <0x1>; 116 #size-cells = <0x0>; 117 118 flash@0 { 119 #size-cells = <0x2>; 120 #address-cells = <0x2>; 121 compatible = "m25p80"; 122 reg = <0x0>; 123 spi-max-frequency = <0x2625a00>; 124 spi-cpol; 125 spi-cpha; 126 }; 127 }; 128 - | # BRCMSTB SoC: MSPI master for any SPI device 129 spi@f0416000 { 130 clocks = <&upg_fixed>; 131 compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi"; 132 reg = <0xf0416000 0x180>; 133 reg-names = "mspi"; 134 interrupts = <0x14>; 135 interrupt-parent = <&irq0_aon_intc>; 136 interrupt-names = "mspi_done"; 137 #address-cells = <1>; 138 #size-cells = <0>; 139 }; 140 - | # iProc SoC 141 #include <dt-bindings/interrupt-controller/irq.h> 142 #include <dt-bindings/interrupt-controller/arm-gic.h> 143 144 spi@18027200 { 145 compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; 146 reg = <0x18027200 0x184>, 147 <0x18027000 0x124>, 148 <0x1811c408 0x004>, 149 <0x180273a0 0x01c>; 150 reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; 151 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, 152 <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, 153 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 154 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, 155 <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, 156 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, 157 <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; 158 interrupt-names = "mspi_done", 159 "mspi_halted", 160 "spi_lr_fullness_reached", 161 "spi_lr_session_aborted", 162 "spi_lr_impatient", 163 "spi_lr_session_done"; 164 clocks = <&iprocmed>; 165 num-cs = <2>; 166 #address-cells = <1>; 167 #size-cells = <0>; 168 }; 169 - | # NS2 SoC 170 #include <dt-bindings/interrupt-controller/irq.h> 171 #include <dt-bindings/interrupt-controller/arm-gic.h> 172 173 spi@66470200 { 174 compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; 175 reg = <0x66470200 0x184>, 176 <0x66470000 0x124>, 177 <0x67017408 0x004>, 178 <0x664703a0 0x01c>; 179 reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; 180 interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>; 181 interrupt-names = "spi_l1_intr"; 182 clocks = <&iprocmed>; 183 num-cs = <2>; 184 #address-cells = <1>; 185 #size-cells = <0>; 186 187 flash@0 { 188 #address-cells = <1>; 189 #size-cells = <1>; 190 compatible = "m25p80"; 191 reg = <0x0>; 192 spi-max-frequency = <12500000>; 193 spi-cpol; 194 spi-cpha; 195 }; 196 }; 197