xref: /freebsd/sys/contrib/device-tree/Bindings/sound/tas2552.txt (revision 18054d0220cfc8df9c9568c437bd6fbb59d53c3c) 
1Texas Instruments - tas2552 Codec module
2
3The tas2552 serial control bus communicates through I2C protocols
4
5Required properties:
6	- compatible - One of:
7		"ti,tas2552" - TAS2552
8	- reg -  I2C slave address: it can be 0x40 if ADDR pin is 0
9				    or 0x41 if ADDR pin is 1.
10	- supply-*: Required supply regulators are:
11		"vbat"		battery voltage
12		"iovdd"		I/O Voltage
13		"avdd"		Analog DAC Voltage
14
15Optional properties:
16	- enable-gpio - gpio pin to enable/disable the device
17
18tas2552 can receive its reference clock via MCLK, BCLK, IVCLKIN pin or use the
19internal 1.8MHz. This CLKIN is used by the PLL. In addition to PLL, the PDM
20reference clock is also selectable: PLL, IVCLKIN, BCLK or MCLK.
21For system integration the dt-bindings/sound/tas2552.h header file provides
22defined values to select and configure the PLL and PDM reference clocks.
23
24Example:
25
26tas2552: tas2552@41 {
27	compatible = "ti,tas2552";
28	reg = <0x41>;
29	vbat-supply = <&reg_vbat>;
30	iovdd-supply = <&reg_iovdd>;
31	avdd-supply = <&reg_avdd>;
32	enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
33};
34
35For more product information please see the link below:
36https://www.ti.com/product/TAS2552
37