xref: /freebsd/sys/contrib/device-tree/Bindings/sound/snps,designware-i2s.yaml (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: DesignWare I2S controller

maintainers:
  - Jose Abreu <joabreu@synopsys.com>

properties:
  compatible:
    oneOf:
      - items:
          - const: canaan,k210-i2s
          - const: snps,designware-i2s
      - enum:
          - snps,designware-i2s
          - starfive,jh7110-i2stx0
          - starfive,jh7110-i2stx1
          - starfive,jh7110-i2srx

  reg:
    maxItems: 1

  interrupts:
    description: |
      The interrupt line number for the I2S controller. Add this
      parameter if the I2S controller that you are using does not
      support DMA.
    maxItems: 1

  clocks:
    items:
      - description: Sampling rate reference clock
      - description: APB clock
      - description: Audio master clock
      - description: Inner audio master clock source
      - description: External audio master clock source
      - description: Bit clock
      - description: Left/right channel clock
      - description: External bit clock
      - description: External left/right channel clock
    minItems: 1

  clock-names:
    items:
      - const: i2sclk
      - const: apb
      - const: mclk
      - const: mclk_inner
      - const: mclk_ext
      - const: bclk
      - const: lrck
      - const: bclk_ext
      - const: lrck_ext
    minItems: 1

  resets:
    items:
      - description: Optional controller resets
      - description: controller reset of Sampling rate
    minItems: 1

  dmas:
    items:
      - description: TX DMA Channel
      - description: RX DMA Channel
    minItems: 1

  dma-names:
    items:
      - const: tx
      - const: rx
    minItems: 1

  starfive,syscon:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle to System Register Controller sys_syscon node.
          - description: I2S-rx enabled control offset of SYS_SYSCONSAIF__SYSCFG register.
          - description: I2S-rx enabled control mask
    description:
      The phandle to System Register Controller syscon node and the I2S-rx(ADC)
      enabled control offset and mask of SYS_SYSCONSAIF__SYSCFG register.

allOf:
  - $ref: dai-common.yaml#
  - if:
      properties:
        compatible:
          contains:
            const: canaan,k210-i2s
    then:
      properties:
        "#sound-dai-cells":
          const: 1
    else:
      properties:
        "#sound-dai-cells":
          const: 0
  - if:
      properties:
        compatible:
          contains:
            const: snps,designware-i2s
    then:
      properties:
        clocks:
          maxItems: 1
        clock-names:
          maxItems: 1
        resets:
          maxItems: 1
    else:
      properties:
        resets:
          minItems: 2
          maxItems: 2
  - if:
      properties:
        compatible:
          contains:
            const: starfive,jh7110-i2stx0
    then:
      properties:
        clocks:
          minItems: 5
          maxItems: 5
        clock-names:
          minItems: 5
          maxItems: 5
      required:
        - resets
  - if:
      properties:
        compatible:
          contains:
            const: starfive,jh7110-i2stx1
    then:
      properties:
        clocks:
          minItems: 9
          maxItems: 9
        clock-names:
          minItems: 9
          maxItems: 9
      required:
        - resets
  - if:
      properties:
        compatible:
          contains:
            const: starfive,jh7110-i2srx
    then:
      properties:
        clocks:
          minItems: 9
          maxItems: 9
        clock-names:
          minItems: 9
          maxItems: 9
      required:
        - resets
        - starfive,syscon
    else:
      properties:
        starfive,syscon: false

required:
  - compatible
  - reg
  - clocks
  - clock-names

oneOf:
  - required:
      - dmas
      - dma-names
  - required:
      - interrupts

unevaluatedProperties: false

examples:
  - |
    soc_i2s: i2s@7ff90000 {
      compatible = "snps,designware-i2s";
      reg = <0x7ff90000 0x1000>;
      clocks = <&scpi_i2sclk 0>;
      clock-names = "i2sclk";
      #sound-dai-cells = <0>;
      dmas = <&dma0 5>;
      dma-names = "tx";
    };