xref: /freebsd/sys/contrib/device-tree/Bindings/sound/rockchip,i2s-tdm.yaml (revision a03411e84728e9b267056fd31c7d1d9d1dc1b01e) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Rockchip I2S/TDM Controller
8
9description:
10  The Rockchip I2S/TDM Controller is a Time Division Multiplexed
11  audio interface found in various Rockchip SoCs, allowing up
12  to 8 channels of audio over a serial interface.
13
14maintainers:
15  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
16
17allOf:
18  - $ref: dai-common.yaml#
19
20properties:
21  compatible:
22    enum:
23      - rockchip,px30-i2s-tdm
24      - rockchip,rk1808-i2s-tdm
25      - rockchip,rk3308-i2s-tdm
26      - rockchip,rk3568-i2s-tdm
27      - rockchip,rk3588-i2s-tdm
28      - rockchip,rv1126-i2s-tdm
29
30  reg:
31    maxItems: 1
32
33  interrupts:
34    maxItems: 1
35
36  dmas:
37    minItems: 1
38    maxItems: 2
39
40  dma-names:
41    minItems: 1
42    maxItems: 2
43    items:
44      enum:
45        - rx
46        - tx
47
48  clocks:
49    minItems: 3
50    items:
51      - description: clock for TX
52      - description: clock for RX
53      - description: AHB clock driving the interface
54      - description:
55          Parent clock for mclk_tx (only required when using mclk-calibrate)
56      - description:
57          Parent clock for mclk_rx (only required when using mclk-calibrate)
58      - description:
59          Clock for sample rates that are an integer multiple of 8000
60          (only required when using mclk-calibrate)
61      - description:
62          Clock for sample rates that are an integer multiple of 11025
63          (only required when using mclk-calibrate)
64
65  clock-names:
66    minItems: 3
67    items:
68      - const: mclk_tx
69      - const: mclk_rx
70      - const: hclk
71      - const: mclk_tx_src
72      - const: mclk_rx_src
73      - const: mclk_root0
74      - const: mclk_root1
75
76  resets:
77    minItems: 1
78    maxItems: 2
79    description: resets for the tx and rx directions
80
81  reset-names:
82    minItems: 1
83    maxItems: 2
84    items:
85      enum:
86        - tx-m
87        - rx-m
88
89  port:
90    $ref: audio-graph-port.yaml#
91    unevaluatedProperties: false
92
93  power-domains:
94    maxItems: 1
95
96  rockchip,grf:
97    $ref: /schemas/types.yaml#/definitions/phandle
98    description:
99      The phandle of the syscon node for the GRF register.
100
101  rockchip,trcm-sync-tx-only:
102    type: boolean
103    description: Use TX BCLK/LRCK for both TX and RX.
104
105  rockchip,trcm-sync-rx-only:
106    type: boolean
107    description: Use RX BCLK/LRCK for both TX and RX.
108
109  "#sound-dai-cells":
110    const: 0
111
112  rockchip,i2s-rx-route:
113    $ref: /schemas/types.yaml#/definitions/uint32-array
114    description:
115      Defines the mapping of I2S RX sdis to I2S data bus lines.
116      By default, they are mapped one-to-one.
117      rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.
118    maxItems: 4
119    items:
120      enum: [0, 1, 2, 3]
121
122  rockchip,i2s-tx-route:
123    $ref: /schemas/types.yaml#/definitions/uint32-array
124    description:
125      Defines the mapping of I2S TX sdos to I2S data bus lines.
126      By default, they are mapped one-to-one.
127      rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.
128    maxItems: 4
129    items:
130      enum: [0, 1, 2, 3]
131
132  rockchip,io-multiplex:
133    description:
134      Specify that the GPIO lines on the I2S bus are multiplexed such that
135      the direction (input/output) needs to be dynamically adjusted.
136    type: boolean
137
138
139required:
140  - compatible
141  - reg
142  - interrupts
143  - dmas
144  - dma-names
145  - clocks
146  - clock-names
147  - resets
148  - reset-names
149  - "#sound-dai-cells"
150
151unevaluatedProperties: false
152
153examples:
154  - |
155    #include <dt-bindings/clock/rk3568-cru.h>
156    #include <dt-bindings/interrupt-controller/arm-gic.h>
157    #include <dt-bindings/interrupt-controller/irq.h>
158    #include <dt-bindings/pinctrl/rockchip.h>
159
160    bus {
161        #address-cells = <2>;
162        #size-cells = <2>;
163        i2s@fe410000 {
164            compatible = "rockchip,rk3568-i2s-tdm";
165            reg = <0x0 0xfe410000 0x0 0x1000>;
166            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
167            clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
168                     <&cru HCLK_I2S1_8CH>;
169            clock-names = "mclk_tx", "mclk_rx", "hclk";
170            dmas = <&dmac1 3>, <&dmac1 2>;
171            dma-names = "rx", "tx";
172            resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
173            reset-names = "tx-m", "rx-m";
174            rockchip,trcm-sync-tx-only;
175            rockchip,grf = <&grf>;
176            #sound-dai-cells = <0>;
177            pinctrl-names = "default";
178            pinctrl-0 =
179                <&i2s1m0_sclktx
180                &i2s1m0_sclkrx
181                &i2s1m0_lrcktx
182                &i2s1m0_lrckrx
183                &i2s1m0_sdi0
184                &i2s1m0_sdi1
185                &i2s1m0_sdi2
186                &i2s1m0_sdi3
187                &i2s1m0_sdo0
188                &i2s1m0_sdo1
189                &i2s1m0_sdo2
190                &i2s1m0_sdo3>;
191        };
192    };
193