xref: /freebsd/sys/contrib/device-tree/Bindings/sound/microchip,sama7g5-i2smcc.yaml (revision cb7aa33ac6cd46a5434798e50363136e64f3ae98)
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/microchip,sama7g5-i2smcc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Microchip I2S Multi-Channel Controller
8
9maintainers:
10  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
11
12description:
13  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
14  supports a Time Division Multiplexed (TDM) interface with external
15  multi-channel audio codecs. It consists of a receiver, a transmitter and a
16  common clock generator that can be enabled separately to provide Adapter,
17  Client or Controller modes with receiver and/or transmitter active.
18  On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
19  multi-channel is supported by using multiple data pins, output and
20  input, without TDM.
21
22properties:
23  "#sound-dai-cells":
24    const: 0
25
26  compatible:
27    enum:
28      - microchip,sam9x60-i2smcc
29      - microchip,sama7g5-i2smcc
30
31  reg:
32    maxItems: 1
33
34  interrupts:
35    maxItems: 1
36
37  clocks:
38    items:
39      - description: Peripheral Bus Clock
40      - description: Generic Clock (Optional). Should be set mostly when Master
41          Mode is required.
42    minItems: 1
43
44  clock-names:
45    items:
46      - const: pclk
47      - const: gclk
48    minItems: 1
49
50  dmas:
51    items:
52      - description: TX DMA Channel
53      - description: RX DMA Channel
54
55  dma-names:
56    items:
57      - const: tx
58      - const: rx
59
60  microchip,tdm-data-pair:
61    description:
62      Represents the DIN/DOUT pair pins that are used to receive/send
63      TDM data. It is optional and it is only needed if the controller
64      uses the TDM mode.
65    $ref: /schemas/types.yaml#/definitions/uint8
66    enum: [0, 1, 2, 3]
67    default: 0
68
69allOf:
70  - $ref: dai-common.yaml#
71  - if:
72      properties:
73        compatible:
74          const: microchip,sam9x60-i2smcc
75    then:
76      properties:
77        microchip,tdm-data-pair: false
78
79required:
80  - "#sound-dai-cells"
81  - compatible
82  - reg
83  - interrupts
84  - clocks
85  - clock-names
86  - dmas
87  - dma-names
88
89unevaluatedProperties: false
90
91examples:
92  - |
93    #include <dt-bindings/dma/at91.h>
94    #include <dt-bindings/interrupt-controller/arm-gic.h>
95
96    i2s@f001c000 {
97        #sound-dai-cells = <0>;
98        compatible = "microchip,sam9x60-i2smcc";
99        reg = <0xf001c000 0x100>;
100        interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
101        dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
102                       AT91_XDMAC_DT_PERID(36))>,
103               <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
104                       AT91_XDMAC_DT_PERID(37))>;
105        dma-names = "tx", "rx";
106        clocks = <&i2s_clk>, <&i2s_gclk>;
107        clock-names = "pclk", "gclk";
108        pinctrl-names = "default";
109        pinctrl-0 = <&pinctrl_i2s_default>;
110    };
111