1Freescale i.MX audio complex with ES8328 codec 2 3Required properties: 4- compatible : "fsl,imx-audio-es8328" 5- model : The user-visible name of this sound complex 6- ssi-controller : The phandle of the i.MX SSI controller 7- jack-gpio : Optional GPIO for headphone jack 8- audio-amp-supply : Power regulator for speaker amps 9- audio-codec : The phandle of the ES8328 audio codec 10- audio-routing : A list of the connections between audio components. 11 Each entry is a pair of strings, the first being the 12 connection's sink, the second being the connection's 13 source. Valid names could be power supplies, ES8328 14 pins, and the jacks on the board: 15 16 Power supplies: 17 * audio-amp 18 19 ES8328 pins: 20 * LOUT1 21 * LOUT2 22 * ROUT1 23 * ROUT2 24 * LINPUT1 25 * LINPUT2 26 * RINPUT1 27 * RINPUT2 28 * Mic PGA 29 30 Board connectors: 31 * Headphone 32 * Speaker 33 * Mic Jack 34- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) 35- mux-ext-port : The external port of the i.MX audio muxer (AUDMIX) 36 37Note: The AUDMUX port numbering should start at 1, which is consistent with 38hardware manual. 39 40Example: 41 42sound { 43 compatible = "fsl,imx-audio-es8328"; 44 model = "imx-audio-es8328"; 45 ssi-controller = <&ssi1>; 46 audio-codec = <&codec>; 47 jack-gpio = <&gpio5 15 0>; 48 audio-amp-supply = <®_audio_amp>; 49 audio-routing = 50 "Speaker", "LOUT2", 51 "Speaker", "ROUT2", 52 "Speaker", "audio-amp", 53 "Headphone", "ROUT1", 54 "Headphone", "LOUT1", 55 "LINPUT1", "Mic Jack", 56 "RINPUT1", "Mic Jack", 57 "Mic Jack", "Mic Bias"; 58 mux-int-port = <1>; 59 mux-ext-port = <3>; 60}; 61