xref: /freebsd/sys/contrib/device-tree/Bindings/sound/fsl,spdif.yaml (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
8
9maintainers:
10  - Shengjiu Wang <shengjiu.wang@nxp.com>
11
12description: |
13  The Freescale S/PDIF audio block is a stereo transceiver that allows the
14  processor to receive and transmit digital audio via an coaxial cable or
15  a fibre cable.
16
17properties:
18  compatible:
19    enum:
20      - fsl,imx35-spdif
21      - fsl,vf610-spdif
22      - fsl,imx6sx-spdif
23      - fsl,imx8qm-spdif
24      - fsl,imx8qxp-spdif
25      - fsl,imx8mq-spdif
26      - fsl,imx8mm-spdif
27      - fsl,imx8mn-spdif
28      - fsl,imx8ulp-spdif
29
30  reg:
31    maxItems: 1
32
33  interrupts:
34    maxItems: 1
35
36  dmas:
37    items:
38      - description: DMA controller phandle and request line for RX
39      - description: DMA controller phandle and request line for TX
40
41  dma-names:
42    items:
43      - const: rx
44      - const: tx
45
46  clocks:
47    items:
48      - description: The core clock of spdif controller.
49      - description: Clock for tx0 and rx0.
50      - description: Clock for tx1 and rx1.
51      - description: Clock for tx2 and rx2.
52      - description: Clock for tx3 and rx3.
53      - description: Clock for tx4 and rx4.
54      - description: Clock for tx5 and rx5.
55      - description: Clock for tx6 and rx6.
56      - description: Clock for tx7 and rx7.
57      - description: The spba clock is required when SPDIF is placed as a bus
58          slave of the Shared Peripheral Bus and when two or more bus masters
59          (CPU, DMA or DSP) try to access it. This property is optional depending
60          on the SoC design.
61      - description: PLL clock source for 8kHz series rate, optional.
62      - description: PLL clock source for 11khz series rate, optional.
63    minItems: 9
64
65  clock-names:
66    items:
67      - const: core
68      - const: rxtx0
69      - const: rxtx1
70      - const: rxtx2
71      - const: rxtx3
72      - const: rxtx4
73      - const: rxtx5
74      - const: rxtx6
75      - const: rxtx7
76      - const: spba
77      - const: pll8k
78      - const: pll11k
79    minItems: 9
80
81  big-endian:
82    $ref: /schemas/types.yaml#/definitions/flag
83    description: |
84      If this property is absent, the native endian mode will be in use
85      as default, or the big endian mode will be in use for all the device
86      registers. Set this flag for HCDs with big endian descriptors and big
87      endian registers.
88
89required:
90  - compatible
91  - reg
92  - interrupts
93  - dmas
94  - dma-names
95  - clocks
96  - clock-names
97
98additionalProperties: false
99
100examples:
101  - |
102    spdif@2004000 {
103        compatible = "fsl,imx35-spdif";
104        reg = <0x02004000 0x4000>;
105        interrupts = <0 52 0x04>;
106        dmas = <&sdma 14 18 0>,
107               <&sdma 15 18 0>;
108        dma-names = "rx", "tx";
109        clocks = <&clks 197>, <&clks 3>,
110                 <&clks 197>, <&clks 107>,
111                 <&clks 0>, <&clks 118>,
112                 <&clks 62>, <&clks 139>,
113                 <&clks 0>;
114        clock-names = "core", "rxtx0",
115                      "rxtx1", "rxtx2",
116                      "rxtx3", "rxtx4",
117                      "rxtx5", "rxtx6",
118                      "rxtx7";
119        big-endian;
120    };
121