xref: /freebsd/sys/contrib/device-tree/Bindings/soc/samsung/exynos-usi.yaml (revision 02e9120893770924227138ba49df1edb3896112a) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung's Exynos USI (Universal Serial Interface)
8
9maintainers:
10  - Sam Protsenko <semen.protsenko@linaro.org>
11  - Krzysztof Kozlowski <krzk@kernel.org>
12
13description: |
14  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
15  USI shares almost all internal circuits within each protocol, so only one
16  protocol can be chosen at a time. USI is modeled as a node with zero or more
17  child nodes, each representing a serial sub-node device. The mode setting
18  selects which particular function will be used.
19
20properties:
21  $nodename:
22    pattern: "^usi@[0-9a-f]+$"
23
24  compatible:
25    oneOf:
26      - items:
27          - const: samsung,exynosautov9-usi
28          - const: samsung,exynos850-usi
29      - enum:
30          - samsung,exynos850-usi
31
32  reg: true
33
34  clocks: true
35
36  clock-names: true
37
38  ranges: true
39
40  "#address-cells":
41    const: 1
42
43  "#size-cells":
44    const: 1
45
46  samsung,sysreg:
47    $ref: /schemas/types.yaml#/definitions/phandle-array
48    items:
49      - items:
50          - description: phandle to System Register syscon node
51          - description: offset of SW_CONF register for this USI controller
52    description:
53      Should be phandle/offset pair. The phandle to System Register syscon node
54      (for the same domain where this USI controller resides) and the offset
55      of SW_CONF register for this USI controller.
56
57  samsung,mode:
58    $ref: /schemas/types.yaml#/definitions/uint32
59    description:
60      Selects USI function (which serial protocol to use). Refer to
61      <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
62
63  samsung,clkreq-on:
64    type: boolean
65    description:
66      Enable this property if underlying protocol requires the clock to be
67      continuously provided without automatic gating. As suggested by SoC
68      manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
69      multi-master mode. Usually this property is needed if USI mode is set
70      to "UART".
71
72      This property is optional.
73
74patternProperties:
75  "^i2c@[0-9a-f]+$":
76    $ref: /schemas/i2c/i2c-exynos5.yaml
77    description: Child node describing underlying I2C
78
79  "^serial@[0-9a-f]+$":
80    $ref: /schemas/serial/samsung_uart.yaml
81    description: Child node describing underlying UART/serial
82
83  "^spi@[0-9a-f]+$":
84    $ref: /schemas/spi/samsung,spi.yaml
85    description: Child node describing underlying SPI
86
87required:
88  - compatible
89  - ranges
90  - "#address-cells"
91  - "#size-cells"
92  - samsung,sysreg
93  - samsung,mode
94
95if:
96  properties:
97    compatible:
98      contains:
99        enum:
100          - samsung,exynos850-usi
101
102then:
103  properties:
104    reg:
105      maxItems: 1
106
107    clocks:
108      items:
109        - description: Bus (APB) clock
110        - description: Operating clock for UART/SPI/I2C protocol
111
112    clock-names:
113      items:
114        - const: pclk
115        - const: ipclk
116
117  required:
118    - reg
119    - clocks
120    - clock-names
121
122else:
123  properties:
124    reg: false
125    clocks: false
126    clock-names: false
127    samsung,clkreq-on: false
128
129additionalProperties: false
130
131examples:
132  - |
133    #include <dt-bindings/interrupt-controller/arm-gic.h>
134    #include <dt-bindings/soc/samsung,exynos-usi.h>
135
136    usi0: usi@138200c0 {
137        compatible = "samsung,exynos850-usi";
138        reg = <0x138200c0 0x20>;
139        samsung,sysreg = <&sysreg_peri 0x1010>;
140        samsung,mode = <USI_V2_UART>;
141        samsung,clkreq-on; /* needed for UART mode */
142        #address-cells = <1>;
143        #size-cells = <1>;
144        ranges;
145        clocks = <&cmu_peri 32>, <&cmu_peri 31>;
146        clock-names = "pclk", "ipclk";
147
148        serial_0: serial@13820000 {
149            compatible = "samsung,exynos850-uart";
150            reg = <0x13820000 0xc0>;
151            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
152            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
153            clock-names = "uart", "clk_uart_baud0";
154            status = "disabled";
155        };
156
157        hsi2c_0: i2c@13820000 {
158            compatible = "samsung,exynosautov9-hsi2c";
159            reg = <0x13820000 0xc0>;
160            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
161            #address-cells = <1>;
162            #size-cells = <0>;
163            clocks = <&cmu_peri 31>, <&cmu_peri 32>;
164            clock-names = "hsi2c", "hsi2c_pclk";
165            status = "disabled";
166        };
167    };
168