xref: /freebsd/sys/contrib/device-tree/Bindings/soc/qcom/qcom,geni-se.yaml (revision 8bab661a3316d8bd9b9fbd11a3b4371b91507bd2)
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#"
5$schema: "http://devicetree.org/meta-schemas/core.yaml#"
6
7title: GENI Serial Engine QUP Wrapper Controller
8
9maintainers:
10  - Bjorn Andersson <bjorn.andersson@linaro.org>
11
12description: |
13 Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
14 is a programmable module for supporting a wide range of serial interfaces
15 like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
16 Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
17 Wrapper controller is modeled as a node with zero or more child nodes each
18 representing a serial engine.
19
20properties:
21  compatible:
22    enum:
23      - qcom,geni-se-qup
24      - qcom,geni-se-i2c-master-hub
25
26  reg:
27    description: QUP wrapper common register address and length.
28    maxItems: 1
29
30  clock-names:
31    minItems: 1
32    maxItems: 2
33
34  clocks:
35    minItems: 1
36    maxItems: 2
37
38  "#address-cells":
39    const: 2
40
41  "#size-cells":
42    const: 2
43
44  ranges: true
45
46  interconnects:
47    maxItems: 1
48
49  interconnect-names:
50    const: qup-core
51
52  iommus:
53    maxItems: 1
54
55required:
56  - compatible
57  - reg
58  - clock-names
59  - clocks
60  - "#address-cells"
61  - "#size-cells"
62  - ranges
63
64patternProperties:
65  "spi@[0-9a-f]+$":
66    type: object
67    description: GENI serial engine based SPI controller. SPI in master mode
68                 supports up to 50MHz, up to four chip selects, programmable
69                 data path from 4 bits to 32 bits and numerous protocol
70                 variants.
71    $ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
72
73  "i2c@[0-9a-f]+$":
74    type: object
75    description: GENI serial engine based I2C controller.
76    $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
77
78  "serial@[0-9a-f]+$":
79    type: object
80    description: GENI Serial Engine based UART Controller.
81    $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
82
83allOf:
84  - if:
85      properties:
86        compatible:
87          contains:
88            const: qcom,geni-se-i2c-master-hub
89    then:
90      properties:
91        clock-names:
92          items:
93            - const: s-ahb
94
95        clocks:
96          items:
97            - description: Slave AHB Clock
98
99        iommus: false
100
101      patternProperties:
102        "spi@[0-9a-f]+$": false
103        "serial@[0-9a-f]+$": false
104    else:
105      properties:
106        clock-names:
107          items:
108            - const: m-ahb
109            - const: s-ahb
110
111        clocks:
112          items:
113            - description: Master AHB Clock
114            - description: Slave AHB Clock
115
116additionalProperties: false
117
118examples:
119  - |
120    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
121    #include <dt-bindings/interrupt-controller/arm-gic.h>
122
123    soc {
124        #address-cells = <2>;
125        #size-cells = <2>;
126
127        geniqup@8c0000 {
128            compatible = "qcom,geni-se-qup";
129            reg = <0 0x008c0000 0 0x6000>;
130            clock-names = "m-ahb", "s-ahb";
131            clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
132                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
133            #address-cells = <2>;
134            #size-cells = <2>;
135            ranges;
136
137            i2c0: i2c@a94000 {
138                compatible = "qcom,geni-i2c";
139                reg = <0 0xa94000 0 0x4000>;
140                interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
141                clock-names = "se";
142                clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
143                pinctrl-names = "default", "sleep";
144                pinctrl-0 = <&qup_1_i2c_5_active>;
145                pinctrl-1 = <&qup_1_i2c_5_sleep>;
146                #address-cells = <1>;
147                #size-cells = <0>;
148            };
149
150            uart0: serial@a88000 {
151                compatible = "qcom,geni-uart";
152                reg = <0 0xa88000 0 0x7000>;
153                interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
154                clock-names = "se";
155                clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
156                pinctrl-names = "default", "sleep";
157                pinctrl-0 = <&qup_1_uart_3_active>;
158                pinctrl-1 = <&qup_1_uart_3_sleep>;
159            };
160        };
161    };
162
163...
164