xref: /freebsd/sys/contrib/device-tree/Bindings/serial/pl011.yaml (revision af23369a6deaaeb612ab266eb88b8bb8d560c322) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/serial/pl011.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: ARM AMBA Primecell PL011 serial UART
8
9maintainers:
10  - Rob Herring <robh@kernel.org>
11
12allOf:
13  - $ref: serial.yaml#
14
15# Need a custom select here or 'arm,primecell' will match on lots of nodes
16select:
17  properties:
18    compatible:
19      contains:
20        enum:
21          - arm,pl011
22  required:
23    - compatible
24
25properties:
26  compatible:
27    items:
28      - const: arm,pl011
29      - const: arm,primecell
30
31  reg:
32    maxItems: 1
33
34  interrupts:
35    maxItems: 1
36
37  pinctrl-0: true
38  pinctrl-1: true
39
40  pinctrl-names:
41    description:
42      When present, must have one state named "default",
43      and may contain a second name named "sleep". The former
44      state sets up pins for ordinary operation whereas
45      the latter state will put the associated pins to sleep
46      when the UART is unused
47    minItems: 1
48    items:
49      - const: default
50      - const: sleep
51
52  clocks:
53    description:
54      When present, the first clock listed must correspond to
55      the clock named UARTCLK on the IP block, i.e. the clock
56      to the external serial line, whereas the second clock
57      must correspond to the PCLK clocking the internal logic
58      of the block. Just listing one clock (the first one) is
59      deprecated.
60    maxItems: 2
61
62  clock-names:
63    items:
64      - const: uartclk
65      - const: apb_pclk
66
67  dmas:
68    minItems: 1
69    maxItems: 2
70
71  dma-names:
72    minItems: 1
73    items:
74      - const: rx
75      - const: tx
76
77  auto-poll:
78    description:
79      Enables polling when using RX DMA.
80    type: boolean
81
82  poll-rate-ms:
83    description:
84      Rate at which poll occurs when auto-poll is set.
85      default 100ms.
86    default: 100
87
88  poll-timeout-ms:
89    description:
90      Poll timeout when auto-poll is set, default
91      3000ms.
92    default: 3000
93
94  resets:
95    maxItems: 1
96
97required:
98  - compatible
99  - reg
100  - interrupts
101
102dependencies:
103  poll-rate-ms: [ auto-poll ]
104  poll-timeout-ms: [ auto-poll ]
105
106unevaluatedProperties: false
107
108examples:
109  - |
110    serial@80120000 {
111      compatible = "arm,pl011", "arm,primecell";
112      reg = <0x80120000 0x1000>;
113      interrupts = <0 11 4>;
114      dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
115      dma-names = "rx", "tx";
116      clocks = <&foo_clk>, <&bar_clk>;
117      clock-names = "uartclk", "apb_pclk";
118    };
119
120...
121