1Lantiq SoC ASC serial controller 2 3Required properties: 4- compatible : Should be "lantiq,asc" 5- reg : Address and length of the register set for the device 6- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier 7 depends on the interrupt-parent interrupt controller. 8 9Optional properties: 10- clocks: Should contain frequency clock and gate clock 11- clock-names: Should be "freq" and "asc" 12 13Example: 14 15asc0: serial@16600000 { 16 compatible = "lantiq,asc"; 17 reg = <0x16600000 0x100000>; 18 interrupt-parent = <&gic>; 19 interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>, 20 <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>, 21 <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>; 22 clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>; 23 clock-names = "freq", "asc"; 24}; 25 26asc1: serial@e100c00 { 27 compatible = "lantiq,asc"; 28 reg = <0xE100C00 0x400>; 29 interrupt-parent = <&icu0>; 30 interrupts = <112 113 114>; 31}; 32