xref: /freebsd/sys/contrib/device-tree/Bindings/serial/atmel,at91-usart.yaml (revision 2e3f49888ec8851bafb22011533217487764fdb0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
9
10maintainers:
11  - Richard Genoud <richard.genoud@gmail.com>
12
13properties:
14  compatible:
15    oneOf:
16      - enum:
17          - atmel,at91rm9200-usart
18          - atmel,at91sam9260-usart
19          - microchip,sam9x60-usart
20      - items:
21          - const: atmel,at91rm9200-dbgu
22          - const: atmel,at91rm9200-usart
23      - items:
24          - const: atmel,at91sam9260-dbgu
25          - const: atmel,at91sam9260-usart
26      - items:
27          - const: microchip,sam9x60-dbgu
28          - const: microchip,sam9x60-usart
29          - const: atmel,at91sam9260-dbgu
30          - const: atmel,at91sam9260-usart
31
32  reg:
33    maxItems: 1
34
35  interrupts:
36    maxItems: 1
37
38  clock-names:
39    minItems: 1
40    items:
41      - const: usart
42      - const: gclk
43
44  clocks:
45    minItems: 1
46    items:
47      - description: USART Peripheral Clock
48      - description: USART Generic Clock
49
50  dmas:
51    items:
52      - description: TX DMA Channel
53      - description: RX DMA Channel
54
55  dma-names:
56    items:
57      - const: tx
58      - const: rx
59
60  atmel,usart-mode:
61    $ref: /schemas/types.yaml#/definitions/uint32
62    description:
63      Must be either <AT91_USART_MODE_SPI> for SPI or
64      <AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h).
65    enum: [ 0, 1 ]
66
67  atmel,use-dma-rx:
68    type: boolean
69    description: use of PDC or DMA for receiving data
70
71  atmel,use-dma-tx:
72    type: boolean
73    description: use of PDC or DMA for transmitting data
74
75  atmel,fifo-size:
76    $ref: /schemas/types.yaml#/definitions/uint32
77    description:
78      Maximum number of data the RX and TX FIFOs can store for FIFO
79      capable USARTS.
80    enum: [ 16, 32 ]
81
82required:
83  - compatible
84  - reg
85  - interrupts
86  - clock-names
87  - clocks
88  - atmel,usart-mode
89
90allOf:
91  - if:
92      properties:
93        atmel,usart-mode:
94          const: 1
95    then:
96      allOf:
97        - $ref: /schemas/spi/spi-controller.yaml#
98
99      properties:
100        atmel,use-dma-rx: false
101
102        atmel,use-dma-tx: false
103
104        atmel,fifo-size: false
105
106        "#size-cells":
107          const: 0
108
109        "#address-cells":
110          const: 1
111
112      required:
113        - "#size-cells"
114        - "#address-cells"
115
116    else:
117      allOf:
118        - $ref: /schemas/serial/serial.yaml#
119        - $ref: /schemas/serial/rs485.yaml#
120
121unevaluatedProperties: false
122
123examples:
124  - |
125    #include <dt-bindings/gpio/gpio.h>
126    #include <dt-bindings/interrupt-controller/irq.h>
127    #include <dt-bindings/mfd/at91-usart.h>
128    #include <dt-bindings/dma/at91.h>
129
130    /* use PDC */
131    usart0: serial@fff8c000 {
132        compatible = "atmel,at91sam9260-usart";
133        reg = <0xfff8c000 0x4000>;
134        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
135        interrupts = <7>;
136        clocks = <&usart0_clk>;
137        clock-names = "usart";
138        atmel,use-dma-rx;
139        atmel,use-dma-tx;
140        rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
141        cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
142        dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
143        dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
144        dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
145        rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
146    };
147
148  - |
149    #include <dt-bindings/gpio/gpio.h>
150    #include <dt-bindings/interrupt-controller/irq.h>
151    #include <dt-bindings/mfd/at91-usart.h>
152    #include <dt-bindings/dma/at91.h>
153
154    /* use DMA */
155    usart1: serial@f001c000 {
156        compatible = "atmel,at91sam9260-usart";
157        reg = <0xf001c000 0x100>;
158        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
159        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
160        clocks = <&usart0_clk>;
161        clock-names = "usart";
162        atmel,use-dma-rx;
163        atmel,use-dma-tx;
164        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
165               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
166        dma-names = "tx", "rx";
167        atmel,fifo-size = <32>;
168    };
169
170  - |
171    #include <dt-bindings/gpio/gpio.h>
172    #include <dt-bindings/interrupt-controller/irq.h>
173    #include <dt-bindings/mfd/at91-usart.h>
174    #include <dt-bindings/dma/at91.h>
175
176    /* SPI mode */
177    spi0: spi@f001c000 {
178        compatible = "atmel,at91sam9260-usart";
179        reg = <0xf001c000 0x100>;
180        #address-cells = <1>;
181        #size-cells = <0>;
182        atmel,usart-mode = <AT91_USART_MODE_SPI>;
183        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
184        clocks = <&usart0_clk>;
185        clock-names = "usart";
186        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
187               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
188        dma-names = "tx", "rx";
189        cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
190    };
191