1Some properties contain an ordered list of 1 or more datum which are 2normally accessed by index. However, some devices will have multiple 3values which are more naturally accessed by name. Device nodes can 4include a supplemental property for assigning names to each of the list 5items. The names property consists of a list of strings in the same 6order as the data in the resource property. 7 8The following supplemental names properties are defined. 9 10Resource Property Supplemental Names Property 11----------------- --------------------------- 12reg reg-names 13clocks clock-names 14interrupts interrupt-names 15 16Usage: 17 18The -names property must be used in conjunction with the normal resource 19property. If not it will be ignored. 20 21Examples: 22 23l4-abe { 24 compatible = "simple-bus"; 25 #address-cells = <2>; 26 #size-cells = <1>; 27 ranges = <0 0 0x48000000 0x00001000>, /* MPU path */ 28 <1 0 0x49000000 0x00001000>; /* L3 path */ 29 mcasp { 30 compatible = "ti,mcasp"; 31 reg = <0 0x10 0x10>, <0 0x20 0x10>, 32 <1 0x10 0x10>, <1 0x20 0x10>; 33 reg-names = "mpu", "dat", 34 "dma", "dma_dat"; 35 interrupts = <11>, <12>; 36 interrupt-names = "rx", "tx"; 37 }; 38 39 timer { 40 compatible = "ti,timer"; 41 reg = <0 0x40 0x10>, <1 0x40 0x10>; 42 reg-names = "mpu", "dma"; 43 }; 44}; 45 46 47usb { 48 compatible = "ti,usb-host"; 49 reg = <0x4a064000 0x800>, <0x4a064800 0x200>, 50 <0x4a064c00 0x200>; 51 reg-names = "config", "ohci", "ehci"; 52 interrupts = <14>, <15>; 53 interrupt-names = "ohci", "ehci"; 54}; 55